834K SCOOPS

Cat Wheel Dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to support your job site efficiently and safely while lowering owning and operating costs. Introduced in the mid-1960's, the 834 has been the industry leader for almost 50 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 834K continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.


SPECIFICATIONS
Engine
Engine Model Cat® C18 ACERT™
Net Power 496 HP
Bore 5.7 in
Stroke 7.2 in
Displacement 1105 in³
Emissions U.S. EPA Tier 4 Final/EU Stage IV, Tier 3 Equivalent, or Tier 2 Equivalent
Gross - SAE J1349 562 HP
Net - SAE J1349 496 HP
Peak Power Speed 1,500 rpm
Peak Torque - 1,300 rpm 2092 ft·lbf
Rated Speed 1,900 rpm
Torque Rise 52%


Transmission
Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 7.7 mile/h
Direct Drive - Forward 3 13.7 mile/h
Direct Drive - Forward 4 23.9 mile/h
Direct Drive - Reverse 1 4.5 mile/h
Direct Drive - Reverse 2 8.1 mile/h
Direct Drive - Reverse 3 14.3 mile/h
Forward - 1 4.2 mile/h
Forward - 2 7.2 mile/h
Forward - 3 12.6 mile/h
Forward - 4 22 mile/h
Reverse - 1 4.2 mile/h
Reverse - 2 7.6 mile/h
Reverse - 3 13.3 mile/h
Transmission Type Cat planetary power shift


Brakes
Brakes ISO 3450:2011


Axles
Front Fixed
Rear Trunnion
Oscillation Angle ±13°


Weights
Operating Weight 112838 lb


Service Refill Capacities
Cooling System 31.7 gal (US)
Crankcase 15.9 gal (US)
Transmission 31.7 gal (US)
Diesel Exhaust Fluid Tank* 8.7 gal (US)
Differential - Final Drives - Front 49.1 gal (US)
Differential - Final Drives - Rear 49.1 gal (US)
Fuel Tank 209.5 gal (US)
Hydraulic System - Tank Only 37 gal (US)
Hydraulic System Factory Fill 63.4 gal (US)


Operating Specifications
Chip Scoop Operating Weight 112838 lb
Coal Scoop Operating Weight 112428 lb


Sound Performance - Tier 4 Final/Stage IV - Standard
Machine Sound Level (ISO 6395) 111 dB(A)
Operator Sound Level (ISO 6396) 73 dB(A)


Sound Performance - Tier 4 Final/Stage IV: Suppression
Machine Sound Level (ISO 6395) 109 dB(A)
Operator Sound Level (ISO 6396) 72 dB(A)


Dimensions (Approximate)
Centerline of Front Axle to Hitch 7.5 ft
Centerline of Rear Axle to Edge of Bumper 10.5 ft
Ground Clearance 1.7 ft
Ground to Center of Front Axle 3.2 ft
Height - Top of Air Cleaner 12.8 ft
Height - Top of Cab 13.7 ft
Height - Top of Exhaust Stack 14.8 ft
Height - Top of Hood 10.9 ft
Length - Front of Tire 28.4 ft
Length - With Chip Scoop on Ground 39.3 ft
Length - With Coal Scoop on Ground 39.3 ft
Wheel Base 14.9 ft


Scoops
Coal Scoop Carry Capacity 30 yd³


Hydraulic System - Lift/Dump/Tilt
Cylinders, Double Acting - Left and Right Dump, Bore and Stroke 127 mm × 838 mm (5.0 in × 33.0 in)
Cylinders, Double Acting - Lift, Bore and Stroke 170.0 mm × 1107 mm (6.7 in × 43.6 in)
Lift/Tilt System Variable displacement piston
Lift/Tilt System - Circuit Pilot operated LS valve with EH
Maximum Flow at 1,900 rpm 153 gal/min
Pilot Maximum Flow 13.7 gal/min
Pilot Relief Valve Setting 580 psi
Pilot System Variable displacement piston
Relief Valve Setting - Lift/Tilt 4206 psi


Hydraulic System - Steering
Maximum Flow 65.8 gal/min
Relief Valve Setting - Steering 3495 psi
Steering Cycle Times - High Idle 3.1 s
Steering Cycle Times - Low Idle 5.7 s
Steering System - Circuit Pilot, load sensing
Steering System - Pump Piston, variable displacement
Total Steering Angle 86°


Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.


Dimensions (Approximate)
Dump Angle at Full Lift Height 64 deg
Height - Edge of Dumped Scoop 5 ft
Height - Edge of Retracted Scoop 7.4 ft


Hydraulic System - Lift/Dump/Tilt
Cylinders, Double Acting - Tilt, Bore and Stroke 152.4 mm × 953 mm (6.0 in × 37.5 in)


Scoops
Chip Scoop Carry Capacity 35 yd³
Chip Scoop Doze Capacity 70 yd³
Coal Scoop Doze Capacity 60 yd³
Components Both scoops come with dual lift cylinders for increased lift capacity. Integrated stabilizer system makes sure that the scoop stays stable and centralized on the machine. Scoop tilt function is standard and provides ±15 degrees of tilt to maintain grade conditions and keep your operation safe.
Type Large capacity scoops for both wood chip and coal applications. A mesh screen integrated into the back of the scoop maintains visibility to the cutting edge. The chip scoop version has extra screens at the top due to higher capacity.


Service Refill Capacities
Note (1) All non-road Tier 4 Final/Stage IV Technology diesel engines are required to use:
– Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications.
– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required.
Note (2) *Only applicable to Tier 4 Final/Stage IV equipped machines.


Sound Performance - Tier 2 Equivalent/Stage II: Standard
Machine Sound Level (ISO 6395) 112 dB(A)
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Level ( ISO 6396) 81 dB(A)


Sound Performance - Tier 2 Equivalent/Stage II: Suppression
Machine Sound Level (ISO 6395) 109 dB(A)
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Level (ISO 6396) 81 dB(A)


Sound Performance - Tier 4 Final/Stage IV - Standard
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.


Sound Performance - Tier 4 Final/Stage IV: Suppression
Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed.


Transmission
Note Travel speeds based on 35/65-R33 tire.


BENEFITS & FEATURES
Efficiency



Structures



Power Train



Operator Station



Technology Solutions



Cat MineStar System



Safety



Sustainability



Productivity



Operating Costs



Serviceability



Customer Support



EQUIPMENT
Standard Equipment

ELECTRICAL
  • Alarm, back-up
  • Alternator (100 amp)
  • Batteries, maintenance-free
  • Deutsch terminal connectors
  • Electrical system (24V)
  • Lighting system, halogen (front and rear), access stairway
  • Starter, electric (heavy-duty)
  • Starting receptacle for emergency starts
OPERATOR ENVIRONMENT
  • Air conditioner
  • Cab, sound suppressed and pressurized
  • Internal four-post rollover protective structure (ROPS/FOPS), radio ready (entertainment) includes antenna, speakers and converter (12V, 15 amp), 12V power port, tinted glass
  • Cigar lighter (12V, 15 amp) and ashtray
  • Coat hook
  • Electro-Hydraulic tilt, tip controls
  • Heater and defroster
  • Horn, electric
  • Light, cab (dome)
  • Lock-up clutch disable switch
  • Lunchbox and beverage holders
  • Monitoring system (VIMS 3G)
  • Action alert system, three category
  • Instrumentation, gauges:
    – Engine coolant temperature
    – Fuel level
    – Hydraulic oil temperature
    – Speedometer/tachometer
    – Transmission oil temperature
    – Instrumentation, warning indicators
    – Axle/brake oil temperature (front/rear)
    – Brake oil pressure
    – Electrical system, low voltage
    – Engine intake/combustion air temperature
    – Engine oil pressure
    – Engine overspeed
    – Fuel pressure
    – Hydraulic oil filter status
    – Parking brake status
    – Transmission filter status
    – Cat Vision (rear vision camera)
  • Mirrors, rearview (externally mounted)
  • Rimpull select switch
  • Seat, Comfort Series (cloth), air suspension
  • Seat belt, retractable, 76 mm (3 in) wide
  • STIC control system with steering lock
  • Tilt and lift control system lock
  • Transmission gear indicator
  • Wet-arm wipers/washers (front and rear)
  • Intermittent front wiper
POWER TRAIN
  • Brakes, full hydraulic, enclosed, wet-disc
  • Multiple disc service brakes
  • Case drain filters
  • Demand fan
  • Engine, Cat C18 MEUI with ACERT Technology, ATAAC, ADEM™ IV controller
  • Fuel priming pump (electric)
  • Parking brake
  • Precleaner, engine air intake
  • Radiator, Next Generation Modular
  • Radiator (NGMR)
  • Separated cooling system
  • Starting aid (ether) automatic
  • Throttle lock
  • Torque converter, impeller clutch with lock-up control system and rimpull control system (switch and dial in cab)
  • Transmission, planetary, autoshift (4F/3R)
OTHER STANDARD EQUIPMENT
  • Doors, service access (locking)
  • Engine, crankcase, 500 hour interval with CH-4 oil
  • Grouped Electronic Clutch Pressure
  • Control, remote mounted pressure taps
  • Hitch, drawbar with pin
  • Hood, metallic with lockable service doors
  • Hydraulic oil cooler
  • Muffler (under hood)
  • Oil sampling valves
  • Stairway, left side (rear access)
  • Steering, load sensing
  • Vandalism protection caplocks
  • Venturi stack
  • ±15 degree scoop tilt
TIRES, RIMS AND WHEELS
  • A tire must be selected from the mandatory attachments section – base machine price includes a tire allowance
ANTIFREEZE
  • Premixed 50 percent concentration of Extended Life Coolant with freeze protection to –34° C (–29° F)

Optional Equipment

POWER TRAIN
  • –50° C (–58° F) antifreeze
  • Engine oil change system, high speed, Wiggins
  • Engine block heater 120V or 240V
  • Engine compression brake
  • Automatic retarding control (with engine compression brake)
  • Axle oil cooler
  • Second starter
  • Jacket water heater
  • Crankcase guards
OPERATOR ENVIRONMENT
  • Cab precleaner
  • AM/FM/CD/MP3 radio
  • Satellite Sirius radio with Bluetooth
  • LED warning strobe
  • CB radio ready
  • Window pull down visor
  • Sound suppression
  • Visor group – cab pull-down shade
  • Cat Detect (rear object detection)
MISCELLANEOUS ATTACHMENTS
  • Front and rear roading fenders
  • Fast fill fuel system (Shaw-Aero)
  • Cat Detect
  • Halogen and HID lights

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.