TL642D WITH STABILIZERS

TL642D Telehandler with Stabilizers


SPECIFICATIONS
Engine
Engine Model Cat® C3.4B
Gross Power - Basic 100 HP
Note Meets U.S. EPA Tier 4 Final emission standards.


Weights
Operating Weight 22928 lb


Operating Specifications
Rated Load Capacity 6500 lb
Maximum Lift Height 42 ft
Maximum Forward Reach 30 ft
Top Travel Speed 20 mile/h
Capacity at Maximum Height (o/r Down) 6500 lb
Capacity at Maximum Height (o/r Up) 6000 lb
Capacity at Maximum Reach (o/r Down) 1700 lb
Capacity at Maximum Reach (o/r Up) 600 lb


Tires
Standard 370/75-28 Air Duraforce
Optional (1) 370/75-28 Foam Duraforce


Hydraulic System
Gear Pump Single-section


Service Refill Capacities
Fuel Tank 38.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US)
Hydraulic System 42 gal (US)


Boom Performance
Boom Up 15.5 s
Boom Down 10.7 s
Tele In 11.8 s
Tele Out 17 s


Brakes
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles


Axles
Type (1) Trunnion mounted planetary 55 degree steer axles
Type (2) High bias limited slip differential on front axle


Hydraulic System
Auxiliary Hydraulic Flow 18 gal/min
Auxiliary Hydraulic Pressure 3481 psi
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure 3770 psi


Operating Specifications
Drawbar Pull - Loaded 19783 lbf
Frame Leveling 10°
Turning Radius - Over Tires 12 ft


Tires
Optional (2) 13.00 × 24-16 PR Air
Optional (3) 13.00 × 24-12 PR Foam Filled
Optional (4) 13.00 × 24 Solid


Transmission Speeds
Forward 4 speed
Reverse 3 speed


Work Tools
Carriages - Dual Fork Positioning 50 in
Carriages - Side Shift 48 in
Carriages - Standard Rotate 50 in
Carriages - Standard Tilt 50 in
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate 72 in
Carriages - Wide Tilt 72 in
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Hydraulic IT Coupler Includes Auxiliary Electrics
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)



HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.