TL1055D

TL1055D Telehandler


SPECIFICATIONS
Engine
Engine Model Cat® C4.4 ACERT™*
Gross Power - Basic 142.1 HP
Note *Meets U.S. EPA Tier 4 Final emission standards.


Weights
Operating Weight 31879 lb


Operating Specifications
Rated Load Capacity 10000 lb
Maximum Forward Reach 42 ft
Top Travel Speed 20.5 mile/h
Capacity at Maximum Height (o/r Down) 5000 lb
Maximum Lift Height (o/r Down) 54.9 ft
Capacity at Maximum Reach (o/r Down) 2500 lb
Frame Leveling 10°


Tires
Standard 400/75-28 Duraforce
Optional 400/75-28 Foam Filled; 14.00-24 Solid; 14.00 × 24 16PR; 14.00 × 24 12PR Foam Filled


Hydraulic System
Pump Type Variable displacement load sensing axial piston pump


Service Refill Capacities
Fuel Tank 38 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US)
Hydraulic System 49 gal (US)


Boom Performance
Boom Up 15 s
Boom Down 13 s
Tele In 16.3 s
Tele Out 18.5 s


Brakes
Service Brakes Inboard wet disc brakes on front and rear axles
Parking Brakes Wet disc, spring applied hydraulic release on front axle


Axles
Types (1) Trunnion mounted planetary 55 degree steer axles.


Work Tools
Hydraulic IT Coupler Includes Auxiliary Electrics
Carriages - Wide Rotate 72 in


Hydraulic System
Auxiliary Hydraulic Flow 25 gal/min


Work Tools
Carriages - Side Shift 48 in
Carriages - Swing 100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
Carriages - Standard Rotate 50 in


Transmission Speeds
Forward 4 speed


Work Tools
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)


Hydraulic System
Auxiliary Hydraulic Pressure 3307 psi
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.


Work Tools
Carriages - Wide Tilt 72 in


Operating Specifications
Turning Radius - Over Tires 14.1 ft


Hydraulic System
System Operating Pressure 3771 psi


Operating Specifications
Drawbar Pull - Loaded 25605 lbf


Work Tools
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Carriages - Standard Tilt 50 in
Note *For use with 1829 mm (72 in) Lumber Forks.


Axles
Types (2) High bias limited slip differential on front axle.


Work Tools
Pallet Forks - Option 1 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)


Transmission Speeds
Reverse 3 speed


Work Tools
Carriages - Dual Positioning 50 in
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Fork Extensions* 90 in
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)