The RM500B Rotary Mixer combines superior performance and reliability to achieve the most demanding job specifications while maximizing machine uptime. With many enhanced features and options, the RM500B is designed to work well in both full depth reclamation and soil stabilization applications.

Maximum Operating Weight 62611 lb

Operating Specifications
Cutting/Mixing Width 96 in
Maximum Cutting/Mixing Depth 20 in
Maximum Travel Speed 6.2 mile/h
Operating Speed 2 mile/h
Rotor Options Universal, Combination, Soil
Rotor Speed - First (at 2100 Engine rpm) 110 r/min
Rotor Speed - Second (at 2100 Engine rpm) 152 r/min
Rotor Speed - Third (at 2100 Engine rpm) 205 r/min

Gross Power 546 HP
Engine Model C15 ACERT

Ground Clearance 19.9 in
Length 33.83 ft
Maximum Height 11.78 ft
Wheel Base 21.33 ft
Width 9.58 ft

Service Refill Capacities
Fuel Tank Capacity 279 gal (US)

C15 Engine with ACERT™ Technology

Cat® C15 ACERT Engine
The C15 engine provides a gross power (SAE J1995) of 407 kW (546 hp). The combination of large displacement and high torque allow the RM500B to propel through the toughest materials. The engine meets US EPA Tier 4 Final and EU Stage IV emission standards.

ACERT Technology
Every Tier 4 Final / Stage IV Cat engine with ACERT technology is equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically lets us meet our customer's high expectations for productivity, fuel efficiency, reliability and service life.

Robust Cooling System

Reversible Cooling Fan
The cooling fan is reversible and automatically performs periodic cycles in reverse to clean the heat exchanger by expelling accumulated dust. This allows the system to cool more efficiently, ensuring optimal engine performance.

Electronically Controlled All-wheel Drive

Four Propel Pumps, Four Drive Motors
Four propel pumps provide separate, dedicated flow to all four drive motors. Provides superior tractive effort in soft underfoot conditions.

Four Propel Pumps, Four Drive Motors

Load Sensing System
Load sensing system controlled by the ECM, matches propel speed to load on the engine.

Load Sensing System

Two Speed Ranges
Two speed ranges allow the machine to operate at either maximum torque to propel the machine through the toughest conditions, or a faster speed for moving around the job site.

Two Speed Ranges

Infinitely Variable Machine Speeds
Infinitely variable machine speeds determined by the propel lever and speed control buttons on the keypad.

Infinitely Variable Machine Speeds


Iso-mounted Cab is Pressurized
Iso-mounted cab reduces vibration and is pressurized to maximize comfort by keeping noise, dust and the elements out.

Iso-mounted Cab is Pressurized

Items Included With Cab
The following features further enhance operator comfort: 1) Heating/air conditioning controls. 2) Left and right access doors. 3) Rotating heated cloth seat with integrated controls. 4) Sound absorbing headliner. 5) Tinted glass. 6) Windshield wipers. 7) Cushioned floor mat. 8) Dual front mounted speakers. 9) Radio-ready mount. 10) Heavy-duty isolation mounts.

Items Included With Cab

Additional Operator Comforts
Additional operator comforts include two cup holders and a 12-volt power receptacle. The cab is also radio-ready and includes a power converter, antenna with cable, two speakers and a headliner location for mounting radio.

Additional Operator Comforts

Cab Provides Exceptional Visibility
The cab provides exceptional visibility to the front tire edge, mixing chamber and to the rear wheels.

Cab Provides Exceptional Visibility

Operator's Station

Sliding Cab
Cab slides left and right and can be positioned to maximize visibility.

Sliding Cab

Operator's Seat
Comfortable and durable seat has an integrated mini handwheel steering control and a control console with LCD touchscreen display and propel joystick. Seat and side control console rotates 180 degrees to enhance operator comfort. Seat is heated to provide greater comfort in cold operating conditions. A seatbelt is standard.

Operator's Seat

Control Console
The control console is integrated with the operator's seat and offers fingertip access to controls regardless of how the seat is positioned. An integrated touchscreen LCD display provides machine operational data, diagnostics and can alert the operator to potential problems. A backlit keypad provides well-defined controls even in poor light conditions. The propel lever houses convenient rotor control buttons so the operator can focus on work rather than look for the proper button to push.

Control Console

Remote Camera System
Remote cameras on the front and rear of the machine provide live video to a display unit mounted to the dashboard. The video enhances visibility for the operator to the front and rear of the machine. An optional third camera is available to provide views to the rear of the mixing chamber.

Remote Camera System

Touchscreen LCD Display
The touchscreen LCD Display provides clear instrumentation and basic diagnostics, alerting the operator to potential performance issues. The screens are easy to understand and intuitive to navigate.

Mini Handwheel Steering
The RM500B is steered with a mini handwheel control integrated with the left armrest of the operator's seat. The control is comfortable to grip and offers effortless, precise control of the machine.

Propel Lever with Thumb Control Buttons
The propel lever is located on the control console integrated with the right arm rest of the operator's seat. Easing the propel lever forward from the neutral position increases speed in the forward direction; moving rearward from neutral increases speed in the reverse direction. The lever has six thumb control buttons that provide convenient control of rotor functions.

Electronic Control Modules

Reliable Field-proven Technology
Reliable field-proven technology provides maximum productivity and simplifies troubleshooting.

Reliable Field-proven Technology

Electronic Control Modules (ECM)
Electronic Control Modules (ECM) receive input signals from sensors in the engine, propel, steering and rotor drive systems which monitor current operating conditions.

Electronic Control Modules (ECM)

Self-diagnostics provide information for troubleshooting and alerts the operator about potential system problems.


Automatic Load Control
Automatic load control adjusts propel speed so that engine speed does not drop below 1900 rpm. Machine always works at peak efficiency for maximum output.

Automatic Load Control

Automatic Rotor Depth Control
Automatic rotor depth control provides consistent quality and performance.

Automatic Rotor Depth Control

Rotor Drive

Cat Powershift Transmission
A Cat powershift transmission drives the rotor and is sized to handle tough cutting and deep mixing.

Cat Powershift Transmission

Heavy-duty Gear Reducers
Heavy-duty gear reducers with four planetary carriers provide excellent rotor drive reliability.

Heavy-duty Gear Reducers

Rugged Drive Chains
Rugged drive chains provide efficient, continuous power to the rotor. Single strand heavy-duty chain resists breakage.

Rugged Drive Chains

Three Rotor Speeds
Three rotor speeds for maximum performance in a variety of materials and cutting depths. First speed is used primarily for pulverizing the material. Second and third rotor speeds can be used as blending or mixing passes.

Three Rotor Speeds

High Capacity
High capacity rotor driveshafts and maintenance-free universal joints.

High Capacity

Heavy-duty Shear Disc or Optional Torque Limiter
Heavy-duty shear disc or optional torque limiter protects rotor drive components from torsional stress and shocks loads.

Heavy-duty Shear Disc or Optional Torque Limiter

Mixing Chamber

Mixing Chamber
Mixing chamber allows the rotor to move independently so that the capacity of the chamber actually increases in deeper cuts to allow better material mixing.

Mid-machine Rotor
Mid-machine rotor uses total machine weight to help keep rotor steady in the cut for uniform depth control.

Bi-directional Mixing
Bi-directional mixing capability increases machine efficiency.

Large Heavy-duty Breaker Bars
Large heavy-duty breaker bars help achieve uniform sizing.

Hydraulically Adjustable Rear Door
Hydraulically adjustable rear door for optimum control of gradation and material uniformity.

Hydraulically Adjustable Front Door
Hydraulically adjustable front door allows more precise sizing control when operating in the reverse direction.

Side Access Doors
Side access doors enable quick and simple replacement of cutting tools on rotor ends.

Hydraulic Front Door

Hydraulically Operated Front Door
Hydraulically operated front door allows the operator to control the opening of the front door from the operator's station.

Dual Hydraulic Cylinders
Dual hydraulic cylinders offer increased lifting force and precise control of the front door.

Front Door Raises Parallel
The front door raises parallel to the cutting surface to prevent the door from plowing material in harsh soil stabilization conditions.

Forward or Reverse Operation
Forward or reverse operation increases machine versatility in soil stabilization.

Visual Site Gauge
Visual site gauge on rotor hood displays door position and allows the operator to precisely control the opening of the front door.

Universal Rotors

Universal Rotor 41 cm (16") for Asphalt
Designed to produce maximum breakout force, the Universal Rotor 41 cm (16") performs well in severe asphalt cuts. It also cuts existing soil cement.

Universal Rotor 46 cm (18") for Soil
The Universal Rotor 46 cm (18") is designed to provide maximum mixing depth and has lower breakout force compared to the Universal Rotor 41 cm (16"). This rotor meets European 45 cm mixing depth requirements while providing the highest level of material pulverization and gradation.


Hydraulic Rotor Hood Tilt
Hydraulic rotor hood tilt rotates hood forward for convenient access to rotor for inspection and tool maintenance.

Hinged Service Doors
Hinged service doors open wide on sides of engine, rotor hood and on top deck for access to power train and rotor drive components.

Self-lubricating Rotor Drive Chains
Self-lubricating rotor drive chains in sealed chain cases partially filled with oil.

Electronic Control Module (ECM)
Electronic Control Module (ECM) monitors machine systems and provides self-diagnostics for operator or service personnel.


Three warning levels alert operator to conditions on the machine that require attention. Encourages repair before major failure.


Level One - a flashing gauge indicator and a flashing alert indicator light.


Level Two - level one warning plus the warning action lamp flashing.


Level Three - level two warning plus the warning action horn sounds.

Visual Indicators
Visual indicators allow easy check of engine coolant, hydraulic oil level, rotor bearing reservoir and air restriction indicator.

Quick-connect Hydraulic Test Ports
Quick-connect hydraulic test ports simplify system diagnostics.

Ecology Drains
Ecology drains provide an environmental method to drain fluids. They are included on the radiator, engine oil pan, hydraulic and fuel tank.

S•O•S(SM) Ports
S•O•S ports allow for simple fluid collection of engine oil, engine coolant and hydraulic oil.

Secure Hose Routing
Secure hose routing with polyethylene routing blocks to reduce rubbing and increase service life.

Nylon Braided Wrap and All-weather Connectors
Nylon braided wrap and all-weather connectors ensure electrical system integrity. Electrical wiring is color-coded, numbered and labeled with component identifiers to simplify troubleshooting.

Maintenance-free Cat Batteries
Maintenance-free Cat batteries are mounted on the side of the machine and are accessible from ground level. Cat batteries are specifically designed for maximum cranking power and protection against vibration.

Machine is Product Link Wire-ready
Machine is Product Link wire-ready. The Cat Product Link System (PLS) ensures maximum uptime and minimum repair costs by simplifying tracking of equipment fleets. Provides automatic machine location and hour updates. Can be obtained through your local Cat dealer.