Dipper Payload 120 t
Dipper Capacity 30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) 120 t
Note Dependent on application and material density
Ballast - Furnished By Customer 667150 lb
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection
Note (2) All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads
Working Weight - With Dipper and Standard Links 3056000 lb
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard 36 ft
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads 38 ft
Ground Bearing Pressure - Note Ground bearing pressure is dependent upon many factors
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm) Treads 36 m2 (380 kPa); 386 ft2 (55 psi)
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm) Treads 47 m2 (297 kPa); 501 ft2 (43 psi)
Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Planetary Propel Dual-motor independent drive
Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Upper Works Overall Width - Including Standard Walkways 41.9 ft
Components (1) Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Type Automatic, single-line system for open gear lubricant and grease
Drive IGBT Acutrol drive system
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - 60 Hz 7,200V, 13,800V
Power Requirements - Average Power Demand 934-1308 kW
Power Requirements - Note Other voltage options available to suit customer requirements
Power Requirements - Peak power 3737 kW
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
System Voltage - Nominal 50/60 Hz, 7,200V
Crowd (1) Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Crowd (2) (Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Rope Data - Boom Suspension - Diameter 3.25 in
Rope Data - Boom Suspension - No. 4
Rope Data - Crowd - Diameter 2.5 in
Rope Data - Crowd - No. 1
Rope Data - Dipper Trip - Diameter 0.75 in
Rope Data - Dipper Trip - No. 1
Rope Data - Hoist - Diameter 2.75 in
Rope Data - Hoist - No. 2
Rope Data - Note High impact ropes available as an option
Rope Data - Retract - Diameter 2.5 in
Rope Data - Retract - No. 1
Type One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Dimensions - Working Ranges
Dipper Capacities 30.6-62.7 m3 (40-82 yd3)
Dipper Payload 120 ton (US)
Maximum Dumping Height 28.9 ft
Operating Weight 3056000 lb
Dimensions (Approximate) - Optimal Working Ranges*
Cutting Height - Maximum 53.5 ft
Cutting Radius - Maximum 80 ft
Dumping Height - With Clearance to Open Dipper Door 28.9 ft
Note (1) Optimal working ranges based on loading a Cat 797F truck.
Note (2) *All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads.
Radius of Level Floor 56.1 ft
Revolving Frame Tail Swing Radius 30.5 ft
Components (2) External FastFil from lower level