D4K2 TIER 4 FINAL/STAGE IV

D4K2 Track-Type Tractor


SPECIFICATIONS
Engine
Engine Model Cat C4.4 ACERT
Power - Net 92 HP
Displacement 269 in³
Bore 4.13 in
Stroke 5 in
Note Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 92 HP
Rated Net Power - 2,200 rpm - SAE J1349 92 HP


Transmission
Drive Pumps 1
Maximum Travel Speed - Forward 5.6 mile/h
Maximum Travel Speed - Reverse 6.2 mile/h
Relief Valve Settings 7033 psi
Track Motors 2


Weights
Operating Weight - XL 18007 lb
Operating Weight - LGP 18686 lb


Service Refill Capacities
Cooling System 5.92 gal (US)
Crankcase - With Filter 2.91 gal (US)
Final Drive - Each - LGP 2.6 gal (US)
Final Drive - Each - XL 2.6 gal (US)
Fuel Tank 51.5 gal (US)
Transmission - Hydraulic Tank 15.7 gal (US)


Hydraulic Controls
Pump Output 17.7 gal/min
Relief Valve Settings 2988 psi


Undercarriage
Ground Contact Area - LGP 4425 in²
Ground Contact Area - XL 3206 in²
Ground Pressure - LGP 4.2 psi
Ground Pressure - XL 5.6 psi
Length - Track on Ground - LGP 89 in
Length - Track on Ground - XL 89 in
Shoe Width - LGP 25 in
Shoe Width - XL 18 in
Track Gauge - LGP 68 in
Track Gauge - XL 61 in


Ripper
Type Parallelogram
Number of Shanks 3
Height 6.5 in
Weight 1222 lb
Maximum Digging Depth 13.3 in
Maximum Ground Clearance Under Tip 17.6 in
Maximum Reach - Ground Line 23.5 in
Overall Width 67.3 in


Winch
Weight 1345 lb
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Drum Capacity - Optional Cable 256 ft
Drum Capacity - Recommended Cable 371 ft
Drum Diameter 10 in
Drum Width 10.8 in
Maximum Line Pull - Bare Drum 40000 lb
Maximum Line Pull - Full Drum 25000 lb
Maximum Line Speed - Bare Drum 131 ft/min
Maximum Line Speed - Full Drum 207 ft/min
Overall Width 29.2 in
Rope Diameter - Optional 0.75 in
Rope Diameter - Recommended 0.63 in
Throat Clearance 6.75 in
Winch Length 27.76 in


Cab
FOPS ISO 3449:2005 Level II
ROPS ISO 6396:2008
Sound Levels - ISO 6396:2008 79 dB(A)
Sound Levels - SAE J1166 FEB2008 79 dB(A)


Dimensions
BLADE: Blade Capacity (SAE) - Intermediate 1.96 yd³
BLADE: Blade Capacity (SAE) - LGP 2.42 yd³
BLADE: Blade Capacity (SAE) - XL 2.59 yd³
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - XL 52° to 58°
BLADE: Blade Height - Intermediate 33.9 in
BLADE: Blade Height - LGP 35.8 in
BLADE: Blade Height - XL 39.8 in
BLADE: Blade Lift Height - Intermediate 29.3 in
BLADE: Blade Lift Height - LGP 27.9 in
BLADE: Blade Lift Height - XL 29.3 in
BLADE: Blade Width - Intermediate 115 in
BLADE: Blade Width - LGP 124 in
BLADE: Blade Width - XL 109.5 in
BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in
BLADE: Blade Width at Maximum Angle - LGP 113.1 in
BLADE: Blade Width at Maximum Angle - XL 100.1 in
BLADE: Digging Depth - Intermediate 23.2 in
BLADE: Digging Depth - LGP 23.2 in
BLADE: Digging Depth - XL 22.5 in
BLADE: Maximum Angle (either side) - Intermediate 25°
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Maximum Angle (either side) - XL 25°
BLADE: Maximum Tilt - Intermediate 17.6 in
BLADE: Maximum Tilt - LGP 17.2 in
BLADE: Maximum Tilt - XL 15.2 in
Ground Clearance - LGP 13 in
Ground Clearance - XL 13 in
Length - Basic Tractor - Without Blade - LGP 128.9 in
Length - Basic Tractor - Without Blade - XL 128.9 in
Overall Length - With Blade - LGP 168.3 in
Overall Length - With Blade - XL 168.3 in
Track Gauge - LGP 67.9 in
Track Gauge - XL 61 in
Tractor Height - LGP 108.8 in
Tractor Height - XL 108.8 in
Width - Tractor - Standard Shoes - No Blade - LGP 92.9 in
Width - Tractor - Standard Shoes - No Blade - XL 79.1 in


Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)


Undercarriage
Number of Rollers - Each Side 7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
Number of Shoes - Each Side - SystemOne Undercarriage 38


Weights
Note Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.


BENEFITS & FEATURES
Slope Indicate


New grade control feature provides you slope of blade in cross slope direction and mainfall (fore/aft) direction without having to estimate.

Slope Assist


New optional grade control feature which helps you more easily achieve the desired blade mainfall and cross slope automatically.

Stable Blade


New blade control feature helps you obtain a finish grade with less operator effort.

Traction Control


New traction control feature reduces track slip and undercarriage wear for lower operating costs.

Eco Mode


New engine throttle settings reduce fuel consumption up to 25% to save you more money.

Heated and Ventilated Seat


Experience a new level of comfort in all climates with the new optional heated and ventilated air suspension seat.

Power Pitch Blade


This option lets the operator easily adjust the blade pitch to optimize productivity.

Engine


Cat® C4.4 ACERT™ diesel engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.

Heated, Seat-Mounted Controls


Heated joysticks (optional) offer even greater comfort in cold climates.

AccuGrade™


Optional grade control system enables operators to cut and fill to grade with increased accuracy, minimizing the need for traditional stakes and grade checkers. Large AccuGrade monitor is built into the machine's dash for easy viewing during operation.

Undercarriage


Choice of undercarriage to give you the lowest costs per hour. Select either the standard sealed and lubricated track (SALT) undercarriage or the innovative SystemOne™ undercarriage.

EQUIPMENT
Standard Equipment

ELECTRICAL
  • Alternator, 12 volt, 120 Amp, heavy duty brushless
  • Alarm, backup
  • Batteries, heavy duty, maintenance free, 1,500 CCA
  • Diagnostic connector
  • Horn, electric
  • Lights, halogen, 2 front and 2 rear
  • Starter, electric, 12 volt
OPERATOR STATION
  • ROPS/FOPS canopy
  • Seat, air suspended, cloth or vinyl
  • Seatbelt, retractable 76 mm (3 in)
  • Foot pads, dash
  • Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
  • Slope Indicate
  • Throttle switch, rotary
  • Eco mode
  • Controls, seat mounted, fore/aft adjustment
  • Armrests, adjustable
  • Mirror, rearview, inside
  • Single pedal combining deceleration and braking functions
  • Independent forward/reverse speed settings
  • Power port, 12 volt
  • Coat hook
  • Storage compartment
  • Cup holder
  • Floor mat, rubber, heavy duty
HYDRAULICS
  • Hydraulics, 3 valve
  • Load sensing hydraulics
  • Single lever, three function control
  • Hydraulic pump and oil
  • Stable blade control
POWER TRAIN
  • Cat C4.4 ACERT diesel engine, turbocharged, Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
  • Aftercooler, Air-to-Air (ATAAC)
  • Aluminum bar plate cooling system (radiator, power train)
  • Air cleaner with precleaner, automatic dust ejection and under-hood intake
  • Dual path, closed-loop hydrostatic transmission
  • Electric fuel priming pump
  • Fuel/water separator
  • Automatic Traction Control
UNDERCARRIAGE
  • SALT Undercarriage
  • 7 roller track frame
  • Track rollers, lifetime lubricated
  • Carrier rollers
  • Track adjusters, hydraulic
  • Guards, front/rear guiding
  • Master link
OTHER STANDARD EQUIPMENT
  • Cat Product Link™ PL631 Satellite/PL641 Cellular
  • C-Frame, VPAT, hydraulic cylinders and lines
  • Lockable engine enclosures
  • Front pull device
  • Rigid drawbar
  • Ecology drains (engine, power train and implement oil and engine coolant)
  • Scheduled oil sampling ports (engine, power train implement oil)
  • Vandalism protection
  • Heavy duty crankcase guard
ANTIFREEZE
  • Extended life coolant, –37° C (–35° F)

Optional Equipment

ELECTRICAL
  • Integrated four front halogen lights, two rear halogen lights
POWER TRAIN
  • Drive, auxiliary
  • Installation, winch
UNDERCARRIAGE
  • Track Pairs, XL: – Track, 460 mm (18 in) MS SystemOne
  • Track Pairs, LGP: – Track, 635 mm (25 in) MS SystemOne
OPERATOR STATION
  • Cab with air conditioning*
  • Cab, polycarbonate windows and air conditioning*
  • Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
  • Radio, AM/FM, Bluetooth
  • Sound suppression
  • *Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
HYDRAULICS
  • Hydraulics, 4 valve for use with ripper
  • Hydraulics, 4 valve for use with winch
GUARDS
  • Guard, rear, heavy duty
  • Grill, radiator, heavy duty
  • Guard, track guiding, center
  • Guard, track roller, full length
  • Screen, rear, cab
  • Screen, side, cab
  • Screen, rear, canopy
  • Screen, front and doors, canopy
  • Sweeps, front
  • Sweeps, rear
BLADES
  • VPAT XL blade
  • VPAT LGP blade
  • VPAT Intermediate blade
REAR ATTACHMENTS
  • Drawbar, towing
  • Mounting, winch
  • Ripper, parallelogram, includes three shanks and teeth
REAR ATTACHMENT CONTROL
  • Control, ripper
  • Control, winch
  • Control, ripper and winch
MACHINE CONTROL AND GUIDANCE
  • Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
  • Power Pitch blade control
STARTING AIDS
  • Heater, engine, coolant, 120 volt
  • Starting aid, ether
OTHER ATTACHMENTS
  • Machine Security System
ANTIFREEZE
  • Extended life coolant, –50° C (–58° F)
FIELD INSTALLED ATTACHMENT
  • Winch, hydrostatic

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.