CB54B - SPLIT DRUM

The Cat® CB54B is a 10 ton roller with 1700 mm (67") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials. It features exceptional visibility and control, smooth operating powertrain, versatile vibratory systems, Cat Compaction Control, and the industry leading water spray system.


SPECIFICATIONS
Weights
Operating Weight 23525 lb
Operating Weight - At Rear Drum with ROPS/FOPS 11398 lb
Operating Weight - At Front Drum with ROPS/FOPS 11552 lb
Operating Weight - With Cab 23525 lb
Maximum Weight at Front Drum 11706 lb
Maximum Weight at Rear Drum 11817 lb
Operating Weight - With ROPS/FOPS 22950 lb


Operating Specifications
Standard Compaction Width 67 in
Curb Clearance 37 in
Turning Radius - Inside Drum Edge 14.3 ft
Ground Clearance 10 in
Maximum Compaction Width 73 in
Static Linear Load 176 lb/in
Travel Speed - Maximum 7.5 mile/h


Engine
Gross Power 133.2 HP
Bore 4.12 in
Stroke 5 in
Engine Model Cat® C4.4 with ACERT Technology


Dimensions
Overall Length 177 in
Wheel Base 130 in
Height - With ROPS/FOPS 117 in
Compaction Width 67 in
Overall Width 74 in
Drum Diameter 47 in
Drum Width 67 in


Vibratory System
Drum Width 67 in
Drum Diameter 47 in
Frequency 3200 V/m
Vibration Selection Independent per drum, front only, rear only, both
Eccentric Weight Drive Hydraulic direct, auto reversing
Centrifugal Force per Drum - Maximum 19491 lb
Centrifugal Force per Drum - Minimum 16973 lb
Nominal Amplitude - High 0.024 in
Nominal Amplitude - Low 0.013 in


Service Refill Capacities
Fuel Tank Capacity 55 gal (US)
Water Spray Tank Capacity 221 gal (US)


BENEFITS & FEATURES
Exceptional Visibility and Control


Comfortable Operating Station
The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.

Fingertip Control
The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

LCD Display
The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

Convenient Console
The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

Vibratory System


Split Drum Design
The exclusive split-drum design delivers excellent mat quality in urban environments when frequent turning is required. When turning, the outside drum half rotates faster than the inside drum, eliminating the potential for shoving and tearing that occurs on standard vibratory drum designs. The exclusive axle-type pod design utilizes tapered roller bearings that support each drum half and eliminates any potential for contact between the two halves.

Dual Amplitude/Dual Frequency Vibratory System
The dual amplitude, dual frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

Performance Features
The vibratory system offers multiple options that help fine-tune performance. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

Cat® Compaction Control


Temperature Sensors
Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping
Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping
Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

Smooth Operating Powertrain


Cat® C4.4 Engine
The C4.4 engine provides 98 kW (131 hp) of power and meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).

High Capacity Cooling System
The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. Two high volume fans direct warm air away from the operator for a more comfortable operating environment.


HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.