299D2 XHP

The Cat® 299D2 XHP Compact Track Loader, with its powerful engine, high output hydraulic system, high lift forces, vertical lift design and torsion axle suspension, provides the maximum performance for work tool productivity, digging, truck loading and material handling in a wide range of underfoot conditions and applications.

Engine Model Cat C3.8 DIT (turbo)
Net Power 106 HP
Gross Power - SAE J1995 110 HP
Net Power - SAE 1349 106 HP
Displacement 232 in³
Bore 3.9 in
Stroke 4.7 in
Net Power - ISO 9249 107 HP

Operating Weight 11608 lb

Operating Specifications
Rated Operating Capacities - 50% Tipping Load 4725 lb
Ground Contact Area 2184 in²
Tipping Load 9450 lb
Breakout Force - Tilt Cylinder 7270 lb
Breakout Force - Lift Cylinder 6162 lb
Rated Operating Capacity with Optional Counterweight 4975 lb
Rated Operating Capacities - 35% Tipping Load 3308 lb

Length - Track on Ground 69.6 in
Overall Length - Track 89.4 in
Height - Top of Cab 83.6 in
Ground Clearance 9.6 in
Departure Angle 33°
Maximum Dump Angle 54°
Bucket Pin Height - Carry Position 7.1 in
Bucket Pin Height - Maximum Lift 126.3 in
Bucket Pin Reach - Maximum Lift 19.4 in
Clearance at Maximum Lift and Dump 94.5 in
Length - With Bucket on Ground 154.7 in
Length - Without Bucket 125.5 in
Maximum Overall Height 158.7 in
Maximum Reach - With Arms Parallel to Ground 51.9 in
Rack Back Angle - Maximum Height 81°
Reach - Maximum Lift/Dump 33.6 in
Turning Radius from Center - Bucket (racked) 91.1 in
Turning Radius from Center - Coupler 58.1 in
Turning Radius from Center - Machine Rear 74 in
Vehicle Width (400 mm/15.7 in tracks) 76 in

Hydraulic System
Hydraulic Flow - XHP - Hydraulic Power (Calculated) 94 HP
Hydraulic Flow - XHP - Maximum Loader Hydraulic Flow* 40 gal/min
Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure 4061 psi
Note *When equipped with Cat 400 Series work tools.
Standard Flow Mode - Hydraulic Power - Calculated 44 HP
Standard Flow Mode - Loader Hydraulic Flow 23 gal/min
Standard Flow Mode - Loader Hydraulic Pressure 3335 psi

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
FOPS Level II ISO 3449:2005 Level II

Power Train
Travel Speed - Forward or Reverse - One Speed 5.2 mile/h
Travel Speed - Forward or Reverse - Two Speed 8.4 mile/h

Service Refill Capacities
Cooling System 4.1 gal (US)
Engine Crankcase 3.5 gal (US)
Fuel Tank 32.2 gal (US)
Hydraulic System 14.5 gal (US)
Hydraulic Tank 10.3 gal (US)

Operating Specifications
Ground Pressure 5.3 psi

Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Roll Back Angle 25°

Peak Torque - 1,500 rpm - SAE J1995 276 ft·lbf

Noise Level
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab** 104 dB(A)

Operating Specifications
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 5 gal (US)

Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA

Comfortable Cab

Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent Work Tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes Cat Compact Track Loaders the industry leader in operator comfort.

Advanced Display

Maximize machine capability and control with the standard Advanced Display providing on-screen adjustments for implement response, hystat response, and creep control, multi-language functionality with customizable layouts, security system, and rearview camera.

Powerful Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability. XHP hydraulic system provides high flow and high pressure that delivers industry leading hydraulic horsepower to efficiently run even the most power hungry work tools. Electronically controlled Cat C3.8 aftercooled engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final/EU Stage IV emission standards. Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and features such as dual direction self level, work tool return to dig and work tool positioner.

Suspended Undercarriage

Standard fully independent torsion axle suspension combined with the Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

Outstanding Versatility

Broad range of performance matched Cat Work Tools make the Cat Compact Track Loader the most versatile machine on the job site.

Easy Service

Ground level access to all daily service and routine maintenance points helps reduce machine downtime for greater productivity.

Standard Equipment

  • 12 volt Electrical System
  • 100 ampere Alternator
  • Ignition Key Start/Stop Switch
  • Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light
  • Backup Alarm
  • Heavy Duty Battery, 1,000 CCA, with Battery Disconnect
  • Gauges: Fuel Level, DEF Level, Hour Meter
  • Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park
  • High Back Cloth Seat with Air Suspension, Heated with Recline and Lumbar Support and Fully Adjustable Seat Mounted Controls
  • Fold In Ergonomic Contoured Armrest
  • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
  • ROPS Cab, Enclosed, Tilt Up
  • FOPS, Level I
  • Top, Rear and Side Windows
  • Headliner, Deluxe
  • Floor Mat
  • Interior Rearview Mirror
  • 12 volt Electric Socket
  • Horn
  • Hand (Dial) and Foot Throttle, Electronic with Decel Feature
  • Advanced Display: Full Color, 127 mm (5 in) LCD Screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Drive Response, and Creep Control; Rearview Camera Included
  • Storage Compartment with Netting
  • Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final/Stage IV Emission Standards
  • Air Cleaner, Dual Element, Radial Seal
  • S·O·SSM Sampling Valve, Hydraulic Oil
  • Filters, Cartridge-type, Hydraulic
  • Filters, Cartridge-type, Fuel and Water Separator
  • Radiator/Hydraulic Oil Cooler (side-by-side)
  • Spring Applied, Hydraulically Released, Wet Multi Disc Parking Brakes
  • Hydrostatic Transmission, Two Speed Travel
  • Suspension – Independent Torsion Axles (4)
  • Speed Sensitive Ride Control
  • Engine Enclosure, Lockable
  • Extended Life Antifreeze, –37° C (–34° F)
  • Machine Tie Down Points (6)
  • Support, Lift Arm
  • Hydraulic Oil Level Sight Gauge
  • Radiator Coolant Level Sight Gauge
  • Radiator, Expansion Bottle
  • Cat ToughGuard™ Hose
  • Auxiliary, Hydraulics, Continuous Flow
  • Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
  • Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
  • Electrical Outlet, Beacon
  • Belly Pan Cleanout
  • Variable Speed Demand Fan
  • Steel Imbed Rubber Track – 400 mm (15.7 in) with Triple Flange Idlers (front and rear)
  • Product Link™ PL240, Cellular
  • Quick Coupler, Mechanical or Powered
  • Seat Belt, 50 mm (2 in) or 75 mm (3 in)
    • Performance Package H3: XHP Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, Electronic Snubbing (Raise and Lower)
    • Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, Air Ride Seat (High Back and Heated) and Door (Glass or Polycarbonate)

Optional Equipment

  • Beacon, Rotating
  • Engine Block Heater – 120V
  • Oil, Hydraulic, Cold Operation
  • Paint, Custom
  • Variable Speed Demand Fan with Reversing Functionality
  • External Counterweights
  • Product Link PL641, Cellular
  • Bluetooth Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
  • Full Steel Track (Sealed and Lubricated – SALT) with Triple Grouser Shoes; One Speed Travel Only

Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.