Cat® Multi-Processors accept multiple interchangeable jaws for a wide range of demolition tasks. Faster cycle times get your jobs done quicker. Greater power means taking on bigger jobs. Quick jaw change gives you the right tool for the task at hand, without slowing you down. All built on a durable, easy to maintain platform.

Force Primary Blade Center 0
Force at Throat 0
Force at Tooth Tip 0
Jaw Opening 0
Weight - Jaw 0
Weight - With Housing 0
Cycle Time - open 0.018

Hydraulic Requirements
Jaw Circuit - Max. Oil Pressure 50.76
Jaw Circuit - Max. Oil Flow 59
Rotation Circuit - Max. Oil Pressure 20.305
Rotation Circuit - Max. Oil Flow 10.6

Cycle Time - Open 1.8 s
Cycle Time - Close 1.2 s
Cycle Time - close 0.012
Cutting Force - Blade Throat 4.88
Cutting Force - Blade Throat 488 Sh Ton
Cutting Force - Blade Center 2.13
Cutting Force - Blade Center 213 Sh Ton
Cutting Force - Blade Tip 1.74
Cutting Force - Blade Tip 174 Sh Ton

Dimensions - Jaw
Jaw Depth 19
Cutter Length 17
Jaw Opening - Maximum 19
Jaw Width - Fixed 11
Jaw Width - Moveable 5

Dimensions - Housing + Jaw
Width 31
Length 84
Height 62

Weight - Housing, Jaw and Bracket 60.74
Weight - Jaw Only 24.97

Hydraulic Requirements
Jaw Circuit - Max. Oil Pressure 5076 psi
Jaw Circuit - Max. Oil Flow 59 gal/min
Rotation Circuit - Max. Oil Pressure 2030.5 psi
Rotation Circuit - Max. Oil Flow 10.6 gal/min

Dimensions - Jaw
Jaw Depth 19 in
Cutter Length 17 in
Jaw Opening - Maximum 19 in
Jaw Width - Fixed 11 in
Jaw Width - Moveable 5 in

Dimensions - Housing + Jaw
Width 31 in
Length 84 in
Height 62 in

Weight - Housing, Jaw and Bracket 6074 lb
Weight - Jaw Only 2497 lb

Recommended Carrier Weight
Excavator Minimum 24 tons
Excavator Maximum 35 tons

Cycle Times are 50 Percent Faster

  • New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
  • You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
  • Maximum crushing/cutting force is applied as soon as the jaw contacts material.

Up to 19 Percent More Force

  • Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
  • Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
  • Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.

Change Jaws in 15 minutes

  • Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
  • Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
  • MP324 accepts these jaw types:
    • Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
    • Demolition – opens wide to crack the largest concrete structures
    • Pulverizer – crushes concrete, separating the rebar
    • Secondary Pulverizer – crushes concrete into finer particles; total rebar separation
    • Shear – cuts structural steel, pipe, and cable
    • Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
    • Universal – innovative design cuts steel and crushes concrete

Durable and Maintainable

  • Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
  • Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
  • Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.