PC412B

Cat® Cold Planers are designed for small paving jobs in residential and commercial applications and are primarily used to economically restore asphalt and concrete surfaces. They are ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited. The Cat Cold Planers are designed for use on Cat Skid Steer Loaders, Multi Terrain Loaders, Compact Track Loaders, Compact Wheel Loaders and Backhoe Loaders.


SPECIFICATIONS
Maximum Cutting Depth 5 in
Required Hydraulics High Flow XHP
Conical Bits 90
Drum Speed 161 rpm
Optimum Hydraulic Flow 150 L/min (40 gpm)
Optimum Hydraulic Pressure 280 bar (4000-4010 psi)
Optional Drum Widths/Depths n/a
Overall Height 38 in
Overall Length 45 in
Overall Width 73 in
Sideshift Travel 22 in
Tilt Angle Range +/- ±6.5 degrees
Weight 2580 lb
Working Width 47 in


BENEFITS & FEATURES
Application


Designed for small paving jobs in residential and commercial applications, and are primarily used to economically restore asphalt and concrete surfaces. Ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited.

Self-leveling Design


Self-leveling design automatically levels itself when placed on the ground for consistent depth control without operator adjustments and excellent spoil retention.

Two Wear-Resistant Skid Plates


Two wear-resistant skid plates remain parallel to the ground for optimum stability.

Hydraulic Side-shift


Hydraulic side-shift permits close planing to curbs, walls and other obstructions.

Independent Left/Right Depth Control


Independent left/right depth control allows maximum drum depths to be adjusted independently on each skid. Gauges are easily viewable from the cab. Independent depth control is mechanical on the PC104B and PC205B models; hydraulic independent depth control is standard on the PC305B-PC412B models.

Max Pro Pressure Gauge


Max Pro Pressure Gauge provides operator feedback to adjust speed for maximum productivity in changing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Standard on XHP models.

Direct Drive System


Direct drive system on the standard flow models features a variable speed, uni-directional, gerotor style hydraulic motor. Direct drive system on high flow and XHP models features a hydraulic radial piston motor to ensure maximum cutting rate and drum torque for optimal production performance and efficiency.

Float, Spring Tilt and Hydraulic Tilt


Float enables planers to follow the contour of the surface. Float is activated by a knob and is only available on high flow and XHP planers. Spring tilt and hydraulic tilt enable planers to oscillate for angled cuts. Tilt is hydraulically controlled on high flow models and spring controlled on standard flow planers.

Bits and Water Sprinkler


All Purpose concrete bits are standard. Optional concrete bits, extreme life bits and water sprinkler kits are available for all models.


CONNECT. DISCUSS. SOLVE.
CATERPILLAR CONSTRUCTION TRADES ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Fuel Primer Pump
I changed the Fuel Filter on my 2012 - 242D Skid Steer machine and the primer pump did not refill th...  [More]

Http://www.drvikasgoswami.cancercross.in/
Dr vikas goswami Those women who experienced any sort of treatment that required their chest territo...  [More]

Can Digital Marketing Affect Your Business Growth Online?
Can Digital Marketing Affect your business growth online? The answer is Yes.Digital Marketing is th...  [More]

430d Key Off Current
Hi Folks,When hooking up the battery on my cat 430d [3054c] I get a spark. When tested with a meter...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.