G3516C

G3516C Generator Set


SPECIFICATIONS
Gas Generator Sets Specification
Maximum Continuous Rating 1605 ekW
Fuel Type Natural Gas
Maximum Electrical Efficiency 40.10%
Maximum Standby Rating 1500kW
Frequency 50/60Hz
RPM 1500/1800rpm


Engine Specifications
Aspiration TA
Bore 6.7 in
Displacement 4210 in³
Engine Model G3516C
Stroke 7.5 in


Generator Set Dimensions
Length 217 in
Width 72 in
Height 92 in
Dry Weight - Genset 30315 lb


BENEFITS & FEATURES
Emissions


Meets most worldwide emissions requirements down to 0.5 g/bhp-hr Nox level without aftertreatment

Full Range of Attachments


Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation

World Wide Product Support


Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

Cat SR4B Generator


Designed to match performance and output characteristics of Caterpillar gas engines. Industry leading mechanical and electrical design. High efficiency

Cat EMCP II+ Control System


Simple user friendly interface and navigation. Digital monitoring, metering and protection setting. Fully-featured power metering and protective relaying. UL508A listed. Remote control and monitor capability options







EQUIPMENT
Standard Equipment

Air Inlet
  • Two-element single-stage air cleaner with enclosure and service indicator
Control Panels
  • EMCP II+
Cooling
  • Engine driven water pumps for jacket water and after cooler
  • Jacket water and SCAC thermostats
  • ANSI/DN customer flange connections for JW inlet and outlet
  • Cat flanges on SCAC circuit
  • Engine driven water pumps for jacket water and after cooler
  • Jacket water and SCAC thermostats
  • ANSI/DN customer flange connections for JW inlet and outlet
  • Cat flanges on SCAC circuit
Exhaust
  • Dry exhaust manifolds, insulated and shielded
  • Center section cooled turbocharger with Cat flanged outlet
  • Individual exhaust port and turbocharger outlet wired to Integrated Temperature Sensing Module (ITSM) with GECM providing alarms and shutdowns
Fuel system
  • Electronic fuel metering valve
  • Throttle plate, 24V DC actuator, controlled by GECM
  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 4.5 to 34.5KPa to the engine fuel control valve
Generator
  • SR4B
  • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
  • Reactive droop
  • Bus bar connections
  • Winding temperature detectors
  • Anti-condensation space heater
Starting/Charging
  • 24V starting motors
  • Battery with cables and rack(shipped loose)
  • Battery disconnect switch
  • 60A, 24V charging alternator (standard on 60Hz 1800 rpm only)
General
  • Paint - Caterpillar Yellow except rails and radiators gloss black
  • Crankshaft vibration damper and guard
  • Operation and maintenance manuals
  • Parts book

Optional Equipment

Air Inlet
  • Heavy Duty air cleaner with precleaner
  • Mounting stand
Control Panels
  • Local alarm module
  • Remote annuciator
  • Remote Communications Module (PL1000T, PL1000E)
Cooling
  • Coolant level drain line with valves, fan with guard
  • Inlet/Outlet connections
Exhaust
  • Flange
  • Exhaust expander
Fuel System
  • Fuel filter
  • Gas pressure regulator
Generator
  • Medium and high voltage generators and attachment
  • Low voltage extension box
  • Cable access box
General
  • Crankcase explosion relief valve
  • Engine barring group

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.