CX31-P600

Your operation depends on the power driving it. And your transmission is as crucial to your power solution as the engine. Cat transmissions are proven in the oil and gas industry and widely known for their exceptional power, leading durability, ease of operation, and shifting options.Ideal applications for Cat CX31-P600 transmissions include workover rigs, kill mud pumps, coil tubing pump support, nitrogen units, acidizing units, and cementing units. CX31-P600 transmissions are optimized for use with C9 ACERT, C11 ACERT, C13 ACERT, C15 ACERT, and C18 ACERT engines (A and B ratings).Cat CX31-P600 oilfield transmission. Gross input power: 447 bkW (600bhp). Configurations available include integral pump drives, integral drop box, and side power take-off.


SPECIFICATIONS
Transmission Specifications
Gross Input Power 600 BHP
Gross Peak Input Torque 2025 ft-lb
Rated Input Speed 2100 r/min
Maximum Turbine Torque 2600 ft-lb
Minimum Input Speed 2500 r/min
Retarder Rating 535 HP
Retarder Rating Speed 2400 r/min
Electrical System 24 V
Gear Type Planetary Spur
Gears 6F/1R
1F Gear Ratio 4.40
2F Gear Ratio 2.33
3F Gear Ratio 1.53
4F Gear Ratio 1.00
5F Gear Ratio 0.72
6F Gear Ratio 0.61
1R Gear Ratio -3.97
Overall Gear Ration 7/21


EQUIPMENT
Standard Equipment

Cat Engines for Optimized Power Train
  • C9 ACERT, C11 ACERT, C13 ACERT, C15 ACERT, C18 ACERT (A and B ratings)
Transmission Rotation
  • Input rotation — counterclockwiseOutput rotation — counterclockwise(as viewed from rear)
Torque Converter
  • Lock-up clutch, torque converter drive in all gears integral to transmission
  • Stall torque ratio
Clutches
  • Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
  • Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
Installation Connections
  • 2 oil cooler lines
  • 1 electrical connector
Oil System
  • Cat Transmission/Drive Train Oil-4 (TDTO) sump oil temperatures
  • Maximum converter outlet oil temperature — 250°F (121°C)
  • Hydraulic fill capacity — 6.5 gal (25 L) subject to cooler size, lines, and installation — initial fill may be greater
  • Direct mount filter
Mountings
  • Input (flywheel) — SAE #1 dry flywheel housing
  • Side supports — two SAE #2 pads
  • Output — 1710 yoke, 1810 yoke, 1810 companion flange, ISO 8667-T180 flange
Power Take-Off Drives
  • Location
  • 8 bolt mounting type
  • Rated torque
  • Rotation: same as engine
  • Ratio, 1:1

Optional Equipment

Oil system
  • Remote mount oil filter
Mountings
  • Remote mount ECU
  • Remote mount filter option
Integral Power Take-Off
  • Location: 1 o'clock and 11 o'clock as viewed from rear
  • Mounting type
  • Rated torque
  • Rotation: same as engine
  • Ratio - 1.09:1
Rear Power Take-Off
  • Location: 5 o'clock as viewed from rear
  • Mounting type: 8 bolt
  • Rated torque: 1000 lb-ft (1360 N•m)
  • Rotation: Opposite of engine
  • Ratio - 1.25:1

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.