C7.1

Cat® C7.1 Diesel Marine Generator Set has three phase ratings of 50 Hertz at 100, 118, and 150 ekW with heat exchanger cooling that meet U.S. EPA Tier 3 commercial, IMO II, and EU CC2 emissions standards. The C7.1 also has three phase ratings of 60 Hertz at 118, 150, 175, and 175 ekW with heat exchanger cooling that meet U.S. EPA Tier 3 commercial, IMO II, and EU CC2 emissions standards. C7.1 gen set is available in 12 or 24 volt and this compact package is ideal for a wide range of commercial and pleasure craft applications.


SPECIFICATIONS
Generator Set Specifications
Minimum Rating 100 ekW (125 kVA)
Maximum Rating 200 ekW (250 kVA)
Frequency 50 Hz or 60 Hz
Speed 1500 rpm (50 hz) or 1800 rpm (60 hz)


Engine Specifications
Engine Model In-line 6, 4-Stroke-Cycle Diesel
Aspiration TA
Bore 4.13 in
Stroke 5.3 in
Displacement 433.3 in³
Governor Type Electronic
Fuel System Common Rail Fuel System


Generator Set Configurations
Emissions/Fuel Strategy EPA Tier 3, IMO II, EU CC2


Generator Set Dimensions
Width 37.6 in
Height 49.7 in
Weight 1652 -1840 kg, 3634-4026 lb
Length 76.2 in/1935 mm (minimum), 83.3 in/2116 mm (maximum)


Generator Specifications
Pitch 2/3
Number of Leads 12
Insulation Class H
IP Rating IP23 Water protection
Voltage Regulator Solid state


BENEFITS & FEATURES
Common Rail Fuel System


Variable multi-shot injection combines with a high compression ratio for optimized fuel efficiency and very low smoke operation
Excellent fuel economy, optimal combustion, low emissions

Injection pressure is independent from load and speed

Injection characteristics optimized for every engine operating point

NOx and soot emissions reduced with amount of reduction dependent on actual engine operating conditions

Control Panel


Location interchangeable between 3 positions

EQUIPMENT
Standard Equipment

AIR INLET SYSTEM
  • Open Crankcase Ventilation (OCV) system
  • Turbocharger, jacket water cooled
  • Integrated coolant lines into manifold utilizing EGR circuit
CONTROL SYSTEM
  • Panels available in RH, LH, and rear configurations with a remote mount option
  • Electronic diagnostics and fault logging
  • Electronic governor
  • Electronic Control Module (ECM)
  • SAE J1939 data link Ratings Only
  • Electronic fuel/air ratio control
COOLING SYSTEM
  • Integrated heat exchanger and aftercooler
  • Compact design integral coolant passages
  • Thermostat and housing
  • Jacket Water Heater 120/240V option
  • Auxiliary seawater pump, gear driven
  • Engine mounted heat exchanger, removable tubeBundle (for sea water) (heat exchanger engines only)
  • Engine oil cooler
  • Auxiliary sea water lines
  • Keel cooling
EXHAUST SYSTEM
  • Water-cooled exhaust manifold & turbocharger
  • 152 mm (6 in) round flanged outlet
  • Dry Elbow/Flange options
FLYWHEELS & FLYWHEEL HOUSINGS
  • Flywheel Housing, SAE No. 2
  • Flywheel, 134 teeth
  • SAE standard rotation
FUEL SYSTEM
  • Common Rail Fuel System
  • Simplex and Duplex Fuel options
  • Flexible fuel line option
  • Fuel transfer pump, gear driven
GENERATORS AND GENERATOR ATTACHMENTS
  • 12 leads
  • 3 phase Brushless
  • Separately excited from auxiliary winding to provide 300% short circuit current up to 10 seconds
  • 2/3 Pitch
  • Broad voltage band
  • IP23 Water protection
  • Solid state voltage regulator with integral voltage adjustment
  • Class H insulation
  • Generator temperature rise exceeds marine society requirements for 105 C @ 50 C ambient - prime 85 C @ 50 C ambient - prime Connection poles
LUBE SYSTEM
  • Crankcase breather
  • Simplex and Duplex options
  • Oil filter, RH service
  • Oil filler, in valve cover and timing case (option)
  • Oil level gauge, RH service
  • Oil pan
  • Oil pan drain, RH`
  • Lubricating oil
  • Engine oil pump (gear driven)
MOUNTING SYSTEM
  • Skiddable base frame
  • Anti vibration isolators between base and engine-generator
POWER TAKE-OFFS
  • Poly-V groove for alternator drive
  • PTO Shaft Kit (optional)
GENERAL
  • Torsional vibration damper and guard
  • Paint, Caterpillar yellow
  • Lifting eyes
  • Protective lifting covers
  • Literature
  • Battery disconnect switch
  • Plastic wrap packaging
  • Note: Keel-cooled gen sets do not include the keel cooler(s).
  • Engine is certified to D2/E2 emissions cycles

Optional Equipment

CONTROL SYSTEM
  • Governor droop kit
EXHAUST SYSTEM
  • Dry Elbow
  • Dry Flange
  • Exhaust Temp Sensor
FUEL SYSTEM
  • Flexible Fuel Lines
LUBE SYSTEM
  • Dipstick
COOLING SYSTEM
  • Coolant recovery tank
  • Jacket Water Heater
POWER TAKE-OFFS
  • Crankshaft Pulley

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.