C32 TIER 3 / IMO II

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

C32 Tier 3 / IMO II
DETAILS

SPECIFICATIONS
Generator Set Specifications
Minimum Rating 219 ekW
Maximum Rating 940 ekW
Frequency 60hz


Engine Specifications
Rated Engine Speed 1800 rpm
Configuration Vee-12, 4-stroke-Cycle-Diesel
Aspiration Turbocharged-aftercooled aspiration
Bore 5.71 in
Stroke 6.38 in
Displacement 1959 in³
Governor Electronic (A4 ECM)
Emissions U.S. EPA Tier 3 / IMO II emissions certified


Generator Set Dimensions
Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)


Engine Specifications
Cooling Heat exchanger, keel or radiator cooled
Generator SR5 - Form Wound
Oil Change Interval 750 hrs
Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)


BENEFITS & FEATURES
SCAC


Separate-circuit aftercooling – no sea water in aftercooler

Fuel System


Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve


Industry leading power reserve

Certifications


Wide range of available Marine Society certifications

Warranty


Industry-leading warranty coverage for factory packaged components

Service


Global dealer network for service in any location

EQUIPMENT
Standard Equipment

AIR INLET SYSTEM
  • Separate circuit aftercooled (SCAC)
CONTROL SYSTEM
  • 24V control system
COOLING SYSTEM
  • Heat exchanger, keel or radiator cooled
  • Watercooled exhaust manifold and turbocharger
  • Hard seawater lines – no flexible hoses
  • Flanges for cooling connections, ANSI or DIN
FUEL SYSTEM
  • Duplex fuel filters with hybrid fuel lines
  • Fuel transfer and priming pump
GENERATORS AND GENERATOR ATTACHMENTS
  • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
LUBE SYSTEM
  • Oil fill, simplex filter and dipstick
MOUNTING SYSTEM
  • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
GENERAL
  • Right or left hand service sides
  • Customer wiring and service tool connector

Optional Equipment

AIR INLET SYSTEM
  • Closed crankcase ventilation
ALARM AND PROTECTION
  • MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
  • IP44 generator protection
EXHAUST SYSTEM
  • Muffler
  • SOLAS approved spray shielding
CHARGING SYSTEM
  • Charging alternator
CONTROL SYSTEM
  • EMCP 4.2 control panel
FUEL SYSTEM
  • Installed primary fuel filter with water separator and manual or electric priming pump
  • Fuel cooler
LUBE SYSTEM
  • Duplex oil filters
STARTING SYSTEM
  • Starting motors – air, electric or dual