G3520B

The line of G3500B engines brings versatility, uptime, and low operating cost to your gas compression operation. They deliver the lowest engine-out emissions in the industry without sacrificing performance. Ideal applications for G3500B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3520B gas engine. Ratings: 1104-1286 bkW (1480-1725 bhp) @ 1200-1400 rpm are NSPS site compliant capable.


SPECIFICATIONS
Engine Specifications
Minimum Rating 1480 BHP
Maximum Rating 1725 BHP
Emissions NSPS Site Compliant Capable
Ignition, Protection ADEM™ A3


BENEFITS & FEATURES
Engine Design


- Built on G3500 LE proven reliability and durability - Ability to burn a wide spectrum of gaseous fuels - Robust diesel strength design prolongs life and lowers owning and operating costs - Broad operating speed range at lower site air densities (high altitude/hot ambient temperatures) - Higher power density improves fleet management - Quality engine diagnostics - Detonation-sensitive timing control for individual cylinders

Ultra Lean Burn Technology (ULB)


ULB technology uses an advanced control system, a better turbo match, improved air and fuel mixing, and a more sophisticated combustion recipe to provide: - Lowest engine-out emissions - Highest fuel efficiency - Improved altitude and speed turndown - Stable load acceptance and load rejection

Emissions


- Meets U.S. EPA Spark Ignited Stationary NSPS emissions for 2010 and some non-attainment areas - Lean air/fuel mixture provides best available emissions and fuel efficiency for engines of this bore size

Advanced Digital Engine Management


ADEM A3 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.

Full Range of Attachments


Large variety of factory-installed engine attachments reduces packaging time.

Testing


Every engine is full-load tested to ensure proper engine performance.

Gas Engine Rating Pro


GERP is a PC-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer


More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repair-before-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience


Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine

Web Site


For all your petroleum power requirements, visit www.catoilandgasinfo.com.

EQUIPMENT
Standard Equipment

Air Inlet System
  • Axial Flow Air cleaner
  • Cleanable
  • Intermediate-duty with service indicator
Control System
  • ADEM A3 with integrated electronic throttle control
  • Control panel
Cooling System
  • Two-stage charge air cooling
  • Thermostats and housing
  • Engine-driven jacket and aftercooler water pump
  • Stainless steel aftercooler cores
Exhaust System
  • Dry exhaust manifolds
  • Dry exhaust elbow
Flywheels and Flywheel Housings
  • SAE No. 00 flywheel
  • SAE No. 00 flywheel housing
  • SAE standard rotation
Fuel System
  • 7-50 psi gas supply
  • Fuel system is sized for 800 to 1200 btu/scf (31.5 to 47.2 MJ/Nm3)
  • Electronic fuel metering valve
  • Gas pressure regulator
  • Gas shutoff valve (GSOV)
Ignition System
  • ADEM A3
Lubrication System
  • Crankcase breather — top mounted
  • Oil cooler
  • Oil filter — RH
  • Oil pan — 143 gal
  • Drain valve
  • Oil sampling valve
  • Turbo oil accumulator
Mounting System
  • Engine mounting rails - 330.2 mm (13 in) industrial-type
Power Take-Offs
  • Front housing — two-sided
  • Front lower LH, RH, and upper RH accessory drives
General
  • Paint — Cat yellow
  • Crankshaft vibration damper and guard
  • CSA Certification, Class 1 Division 2, Group D - electrical system and instrumentation - includes ADEM A3 and control panel

Optional Equipment

Air Inlet System
  • Round air inlet adaptors
Charging System
  • Charging alternator - CSA approved 24V, 65 A
Cooling System
  • Flexible connections
Exhaust System
  • Flexible fittings
  • Flange and expander
Fuel System
  • Gas filter
Instrumentation
  • Communications module
Lubrication System
  • Lubricating oil
  • Oil bypass filter
  • Air prelube pump
Power Take-Offs
  • Front stub shaft
  • Pulleys
  • Double damper
Protection System
  • Explosion relief valves
  • Secondary GSOV
Starting System
  • Air starting motor with controls (90 psi or 150 psi)
  • API B16.3 compliant piping
  • Jacket water heater
  • Barring group
General
  • Special paint
  • Torsional vibration analysis
EU Certification
  • EEC DOI certification
Support
  • Factory commissioning

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.