C18 (50 HZ) CHINA NON ROAD

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.


SPECIFICATIONS
Generator Set Specifications
Minimum Rating 550 kVA
Maximum Rating 715 kVA
Voltage 208 to 600 Volts
Frequency 50 Hz
Speed 1500 RPM


Generator Set Configurations
Emissions/Fuel Strategy Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards


Engine Specifications
Engine Model C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore 145 mm (5.71 in)
Displacement 18.13 L (1106.36 in3)
Stroke 183 mm (7.2 in)
Compression Ratio 14.5:1
Aspiration Air to Air Aftercooled
Governor Type Adem™A4
Fuel System Electronic unit injection


BENEFITS & FEATURES
Generator


  • Matched to the performance and output characteristics of Cat engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency

Cat EMCP Control Panel


The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.

Seismic Certification


  • Seismic Certification available.
  • Anchoring details are site specific, and are dependent on many factors such as generator set size, weight, and concrete strength.
  • IBC Certification requires that the anchoring system used is reviewed and approved by a Professional Engineer
  • Seismic Certification per Applicable Building Codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007, CBC 2010
  • Pre-approved by OSHPD and carries an OSP-0321-10 for use in healthcare projects in California

Design Criteria


The generator set accepts 100% rated load in one step per NFPA 110 and meets ISO 8528-5 transient response.

UL 2200 / CSA - Optional


  • UL 2200 listed packages
  • CSA Certified
  • Certain restrictions may apply.
  • Consult with your Cat® Dealer.

Single-Source Supplier


Fully prototype tested with certified torsional vibration analysis available

World Wide Product Support


Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

EQUIPMENT
Standard Equipment

Air System
  • Air Cleaner,light duty
  • Turborcharger
Control Panels
  • EMCP 4.2
Cooling System
  • Radiator and cooling fan with guard
  • Coolant drain line with valve
  • Fan drive, battery charging alternator drive
  • Caterpillar Extended Life Coolant
Exhaust System
  • Stainless steel exhaust flex, gaskets, raincap and SAE exhaust flange for customer use; shipped loose
Fuel System
  • Standard open set fuel tank / base supplied Base, formed steel with single wall integral 8-hour fuel tank
Generator and Attachments
  • A frame generator - IP21 Protection
  • Optional LC frame generator - IP23 Protection,
  • Integrated Voltage Regulator
  • Power center, IP22
  • Segregated low voltage (AC/DC) wiring panel
  • Mandatory Option Rear circuit breaker, IEC, 3 pole, mounted in power center
Governing System
  • Cat Electronic Governor (ADEM A4)
Lube System
  • Lubricating oil
  • Oil drain valves
Mounting System
  • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/Charging
  • 24 Volt battery with rack and cables
General
  • Engine and alternator pre-paint, Caterpillar Yellow

Optional Equipment

Certifications
  • European Certifications - EU certificate of conformance
  • Global
Air Inlet System
  • Single element air cleaner
  • Dual element air cleaner
Circuit Breakers
  • 3 Pole (IEC-100% rated) - package mounted
  • 4 Pole (IEC-100% rated) - package mounted
  • 3 Pole (IEC-100% rated) - motorized
  • 4 Pole (IEC-100% rated) - motorized
  • Pad-lockable device
  • Power terminal strips
Control Systems
  • Volt free contacts
  • Control panel protective devices
  • Local alarm modules
  • Remote annunciator modules
Cooling System
  • Radiator duct flange
Enclosures
  • Sound attenuated enclosures
Exhaust System
  • Engine mounted muffler
  • Mufflers, End in/ End out
  • Flange groups; 8 and 10 inch weld flanges and gaskets
  • Elbow Kit
  • Manifold and turbocharger guard
Fuel System
  • Integral -Duel wall fuel tank bases
  • Manual fuel transfer system
  • Fuel transfer system
Generator and Attachments
  • Ingress protection
  • Permanent magnet excitation
  • Space heaters
  • A frame oversize generator
  • A frame CIP generator
  • LC frame generator
  • LC frame oversize generator
  • LC frame CIP generator
Lube System
  • Manual sump pump
Mounting System
  • Narrow skid base
Starting / Charging System
  • 5 Amp battery charger
  • Battery disconnect switch
  • Jacket water heater

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.