3512C

3512C
DETAILS

SPECIFICATIONS
Generator Set Specifications
Minimum Rating 1550 eKW (1937 kVA)
Maximum Rating 1700 eKW (2125 kVA)
Frequency 60 hz
Speed 1800


Engine Specifications
Configuration Vee 12 4-Stroke-Cycle Diesel
Aspiration TTA
Bore 6.7 in
Stroke 8.46 in
Displacement 3574 in³


Generator Set Configurations
Emissions IMO II


Generator Set Dimensions
Length 200.2 in
Width 84.3 in
Height 83.9 in
Weight - Estimated 28136 lb


BENEFITS & FEATURES
Emissions flexibility and capability



High power density



Improved reliability and durability



Medium speed BSFC and reliability in a high-speed product



EQUIPMENT
Standard Equipment

AIR INLET SYSTEM
  • Corrosion resistant separate circuit aftercooler core, regular duty air cleaners, dual turbochargers
CONTROL SYSTEM
  • Caterpillar A-III electronic engine control, Electronic Unit Injection fuel system, rigid wiring harness
COOLING SYSTEM
  • Auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing
EXHAUST SYSTEM
  • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields, vertical exhaust outlet
FLYWHEELS & FLYWHEEL HOUSINGS
  • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
FUEL SYSTEM
  • Fuel filter, RH, with service indicators
  • Fuel transfer pump
  • Electronically Controlled Unit Injectors
INSTRUMENTATION
  • Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system
LUBE SYSTEM
  • Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
MOUNTING SYSTEM
  • Industrial type engine mounting rails)
POWER TAKE-OFFS
  • Accessory drive Lower RH, Lower LH Front housing, Two-sided
PROTECTION SYSTEM
  • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
  • Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
GENERAL
  • Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes

Optional Equipment

AIR INLET SYSTEM
  • Air Cleaner Removal
  • Remote Air Inlet Adapters
CHARGING SYSTEM
  • Battery Chargers
  • Charging Alternators
CONTROL SYSTEM
  • Load Sharing module
  • Local speed throttle control
COOLING SYSTEM
  • Water level switch gauge
  • Coolant level sensors
  • Connections
  • Keel Cooling Conversions
  • Radiator cooling conversion
  • Heat exchangers
  • Auxiliary water pumps
  • Sea water pump removal
  • Air separator
EXHAUST SYSTEM
  • Exhaust outlet
  • Flexible fittings
  • Elbows
  • Flanges
  • Flange and exhaust expanders
  • Mufflers
FUEL SYSTEM
  • Fuel Cooler
  • Fuel priming pumps
  • Flexible fuel lines
  • Rigid Fuel Lines
  • Primary fuel filter
  • Fuel level switch
GENERATORS AND GENERATOR ATTACHMENTS
  • 1500/1800 RPM, 1000/1200 RPM
  • Low Voltage Connection
  • Generator Conversion
  • Low Voltage Extension Box
  • RFI Filter
  • Bearing Temperature Detectors
  • Manual Voltage Control
  • Air Filter
INSTRUMENTATION
  • PL1000T Communication Module
  • PL1000E Communication Module
  • Customer Interface Box
  • Thermocouples
  • Remote panel display
  • Remote cylinder temperature display
LUBE SYSTEM
  • Oil Pan
  • Oil pan accessories
  • Sump pumps
  • Prelubrication Options
  • Lubricating oil
  • Centrifugal Oil Filter
MOUNTING SYSTEM
  • Vibration isolators
  • Rails
POWER TAKE-OFFS
  • Flywheel guard
  • Flexible coupling
  • Coupling hub
  • Front housing accessories
  • Upper left hand front location
  • Upper left hand rear location
  • Upper right hand front location:
  • Upper right hand rear location
  • Lower left hand front location
  • Front housing accessory drives
  • Front power take-offs
  • Crankshaft pulleys
  • Damper guard removals
PROTECTION SYSTEM
  • Air inlet shutoffs
  • Switches and contactors
  • Explosion relief valve
  • Sensors
STARTING SYSTEM
  • Starting motors or barring divice
  • Air starting motors options
  • Battery sets - 24 volt - Dry
  • Battery rack
  • Jacket Water Heater
GENERAL
  • Tool set
  • Caterpillar datalink wire
SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
  • Commissioning

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.