G3606

G3600 engines provide a wide range of power options to fit your gas compression application. G3600 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3500B engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606 gas engine with ratings: 1324-1413 bkW (1775-1895 bhp) @ 1000 rpm are NSPS site compliant capable.


SPECIFICATIONS
Engine Specifications
Minimum Rating 1775 BHP
Maximum Rating 1895 BHP
Emissions NSPS Site Compliant Capable
Displacement 7762 in³
Compression Ratio 9.2:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel Teeth 255
Weight - Dry 34560 lb
Oil Change Interval 5000 hours
Ignition, Protection Electronic (ADEM™ A3)
Stroke 11.8 in
Bore 11.8 in


Capacity for Liquids
Cooling System 106 gal (US)
Lube Oil System - Refill 187 gal (US)


BENEFITS & FEATURES
Emissions


Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2010/11 with the use of an oxidation catalyst

Lean Burn Engine Technology


Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.

Ease of Operation


- High-strength pan and rails for excellent mounting and stability - Side covers on block allow for inspection of internal components

Advanced Digital Engine Management


ADEM A3 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.

Full Range of Attachments


Large variety of factory-installed engine attachments reduces packaging time.

Testing


Every engine is full-load tested to ensure proper engine performance.

Gas Engine Rating Pro


GERP is a PC-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer


More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience


Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine

Web Site


For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Web Site


For all your petroleum power requirements, visit www.catoilandgasinfo.com.

EQUIPMENT
Standard Equipment

Air Inlet System
  • Air cleaner — standard-duty inlet air adapter
Control System
  • ADEM A3 control system provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
Cooling System
  • Jacket water pump
  • Jacket water thermostats and housing
  • Aftercooler pump
  • Aftercooler water thermostats and housing
  • Single-stage aftercooler
Exhaust System
  • Dry wrapped exhaust manifolds
  • Vertical outlet adapter
Flywheels and Flywheel Housing
  • SAE standard rotation
Fuel System
  • Gas admission valves with electronically controlled fuel supply pressure
Ignition System
  • A3 control system senses individual cylinder detonation and controls individual cylinder timing
Instrumentation
  • LCD display panel monitors engine parameters and displays diagnostic codes
Lube System
  • Crankcase breathers (top mounted)
  • Oil cooler
  • Oil filter
  • Oil pan drain valve
Mounting System
  • Engine mounting feet (four total)
Protection
  • Electronic shutoff system with purge cycle
  • Crankcase explosion relief valves
  • Gas shutoff valve
Starting System
  • Air starting system
General
  • Paint — Cat yellow
  • Vibration dampers

Optional Equipment

Air Inlet System
  • Heavy-duty air cleaner with precleaners
  • Heavy-duty air cleaner with rain protection
Charging System
  • Charging alternators
Control System
  • Custom control system software is available for nonstandard ratings. Software is field programmable using flash memory.
Cooling System
  • Expansion tank
  • Flexible connections
  • Jacket water heater
Exhaust System
  • Flexible bellows adapters
  • Exhaust expander
  • Weld flanges
Fuel System
  • Fuel filter
  • Gas pressure regulator
  • Flexible connection
  • Low energy fuel system
  • Corrosive gas fuel system
Ignition System
  • CSA certification
Instrumentation
  • Remote data monitoring and speed control
  • Compatible with Cat® Electronic Technician (ET) and Data View
  • Communication Device — PL1000T/E
  • Display panel deletion is optional
Lube System
  • Air or electric motor-driven prelube
  • Duplex oil filter
  • LH or RH service
  • Lube oil makeup system
Mounting System
  • Mounting plates (set of six)
Power Take-Offs
  • Front stub shafts
Starting System
  • Air pressure reducing valve
  • Natural gas starting system
General
  • Engine barring device
  • Damper guard

CONNECT. DISCUSS. SOLVE.
CATERPILLAR MARINE POWER ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Sludge In Sump
After draining the oil and removing the sump plug I found there was a bit of grainy sludge. Would it...  [More]

ET Tools 2014a
I started to use the ET Tools 2014 on notebook. But the notebook was fake now.I renew the notebook t...  [More]

C7 Valve Cover Riser Bolts???
Hi we need to replace some valve cover spacer to block bolts on a C7. The old ones had an integral...  [More]

3126B Loosing Coolant
I have Cat 3126B in Cabo. Gauges indicate 205 but IR gun at temp sensors indicate 190.?Also one moto...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.