Home :Products :Cat Engines and Transmissions :For Marine Applications :CN3586 Electric Motor for Gas Compression

CN3586 ELECTRIC MOTOR FOR GAS COMPRESSION

Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.


SPECIFICATIONS
Electric Motor Specifications
Electric Motor Type Squirrel Cage Induction Motor
Full Load Speed 894 rpm
Mounting Designation F1 or F2
Number of Poles 8
Type of EX-Protection Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
Voltage/Frequency 4000V & 4160V ± 10%/60 Hz
Connection of Stator Winding Star
Duty Continuous
Enclosure Type/Method of Cooling WP-II
Full Load Current 458 Amps
Insulation Class F
Locked Rotor Amps 540% Code E
Locked Rotor Torque 60%
Maximum Altitude - Before Derate 3300 ft
Maximum Ambient Temperature 104 °F
No Load Current 137 Amps
Rated Torque 20555 lb/ft
Service Factor 1.15 SF (1.0 VFD)
Shaft 8.5 in
Standards NEMA MG1
Temperature Rise Class B at rated load


EQUIPMENT
Standard Equipment

Bearings
  • Bearing RTDs for temperature monitoring
  • Insulated non-drive end bearings to reduce bearing currents
  • Anti-friction on 1500 hp (optional)
Rotors
  • Designed for minimal vibration
  • Dynamic balancing at full operational speed
  • Fabricated copper squirrel cages
  • Forged, keyless shaft
  • AISI 4140/DIN42CrMo4 shaft
Stators
  • Radial air ducts ensure uniform and efficient cooling
  • Vacuum pressure impregnated with specially formulated epoxy resin
  • 2X RTDS per Phase
  • Space heater
  • Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges