C18 TIER 3

C18 ACERT auxiliary/generator set engines incorporate a separate circuit aftercooling system (SCAC) for all configurations. The primary advantage of the SCAC systsem is reduced aftercooler corrosion since no sea water circulates through the aftercooler. Many other improvements on these engines also contribute to minimizing owning and operating costs. The EPA Tier 3, IMO II, EU Stage IIIA compliant ratings are available with heat exchanger or keel cooled options. All major MCS type approvals are available from the factory.


SPECIFICATIONS
Power Rating
Minimum Rating 624 BHP
Maximum Rating 803 BHP


Engine Specifications
Aspiration TA, TTA
Bore 5.7 in
Configuration In-Line 6, 4-Stroke-Cycle Diesel
Displacement 1106 in³
Rotation from Flywheel End Counterclockwise
Stroke 7.2 in


Dimensions & Weights
Dry Weight 1950 lb
Height 51.2 in
Length 73 in
Width 44.6 in


BENEFITS & FEATURES
Separate circuit aftercooling system


The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler

Emissions


EPA Tier 3 compliant, IMO II and EU IWW compliant

Cooling system


Heat exchanger and Keel cooled options for all ratings

Turbo Configurations


Single turbo configurations for all ratings

Competitive size and weight


Marine Certifications


All major MCS type approvals available from factory

EQUIPMENT
Standard Equipment

AIR INLET SYSTEM
  • Separate circuit after-cooled (SCAC)
  • Open Crankcase Ventilation (OCV) system
  • Turbocharger, jacket water cooled
  • Turbocharger inlet, 152 mm (6 in) OD straight connection
CONTROL SYSTEM
  • Programmable low idle
  • Electronic diagnostics and fault logging
  • Electronic fuel/air ratio control
  • Engine Protection Mode for extended ambient conditions - EPA Tier 3 Ratings Only
  • 70-pin customer connector
  • Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA
COOLING SYSTEM
  • Separate Circuit After-Cooling (SCAC) for both HEX and Keel cooled engines
  • Engine JW and SCAC Shell & Tube Heat Exchangers for HEX cooled engines
  • SCAC pump, gear driven, for HEX cooled engines only
  • Jacket water pump, gear driven
  • Auxiliary water pump, gear driven
  • Sea water pump, bronze impeller, gear driven
  • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
EXHAUST SYSTEM
  • 152 mm (6 in) round flanged outlet
  • Water-cooled exhaust manifold & turbocharger
FLYWHEELS & FLYWHEEL HOUSINGS
  • Flywheel Housing, SAE No. 0
  • Flywheel, 18 inch, 136 teeth
  • SAE standard rotation
FUEL SYSTEM
  • Front service simplex fuel system
  • Fuel transfer pump, gear driven
  • Manual fuel priming pump
  • Hybrid fuel line design
LUBE SYSTEM
  • Front service simplex oil system
  • Center sump oil pan:
  • Front and top service oil filler locations
  • Front service dipstick
  • Oil pump, gear driven
MOUNTING SYSTEM
  • Front support - adjustable
POWER TAKE-OFFS
  • Hydraulic Pump Drive
  • Crankshaft Pulleys
  • Front Stub Shaft
  • Front Enclosed Clutch
GENERAL
  • Front damper guard
  • Front service engine
  • Common electrical bonding point
  • Engine does not ship with zinc components
  • NOTE: These engines are for constant speed generator set applications only, and NOT to be used for variable speed applications

Optional Equipment

EXHAUST SYSTEM
  • Dry Elbows
  • Water-Cooled Elbows
  • Flexible Fitting
  • Flange
  • Muffler
  • Muffler Spark Arresting
AIR INLET SYSTEM
  • Air Inlet Adapter
CHARGING SYSTEM
  • Battery Chargers
  • Charging Alternators
  • Alternator Mounting Group
  • Ammeter
CONTROL SYSTEM
  • MECP I - Marine Engine Control Panel
  • Caterpillar Alarm and Protection
  • Load Sharing Attachment
COOLING SYSTEM
  • Aux Expansion Flange Kit
FUEL SYSTEM
  • Duplex Fuel Filters
  • Fuel Cooler
  • Primary Fuel Filters
  • Flexible Fuel Lines
INSTRUMENTATION
  • Instrument Panels
  • OEM Wiring Harness
  • Gauges
  • Oil Level Sensor
LUBE SYSTEM
  • Duplex Oil Filters
  • Sump Pump
POWER TAKE-OFFS
  • Crankshaft Pulleys
  • Front Stub Shaft
  • Hydraulic Pump Drive Adapter
  • Front Enclosed Clutch
PROTECTION SYSTEM
  • Marine Classification Society and SOLAS
STARTING SYSTEM
  • Electric Starting Motors - Single 24 Volt
  • Air Starting Motor
  • Air Start Accessories
  • Starting Aids - JW Heaters
  • Battery Sets - 24 Volt - Dry
MOUNTING SYSTEM
  • Front Support
  • REAR ENGINE SUPPORT
PACKING
  • Engine Protective Cover
  • Storage Preservation
  • Export Packing

HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.