G3516H

G3516H Generator Set


SPECIFICATIONS
Engine Specifications
Compression Ratio 12.1
Fuel System Nat Gas


Generator Sets Specification
Maximum Continuous Rating 2027 / 2007 ekW


Generator Set Specifications
Fuel Type Natural Gas


Generator Sets Specifications
Maximum Electrical Efficiency 44.70%
Frequency 50 / 60 Hz
RPM 1500 / 1800 rpm


Engine Specifications
Engine Model G3516H
Displacement 4765 in³
Aspiration TA
Bore 6.7 in
Stroke 8.5 in


Generator Set Dimensions
Length 291 in
Width 84 in
Height 95 in
Dry Weight - Genset 40384 lb


BENEFITS & FEATURES
Emissions


Meets most worldwide emissions requirements down to 0.5 g/bhp-hr Nox level without aftertreatment

Full Range of Attachments


Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation

World Wide Product Support


Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

CAT SR5 Generator


Designed to match performance and output characteristics of Caterpillar gas engines. Industry leading mechanical and electrical design. High efficiency

CAT EMCP4.3 Control Panel


The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4.3 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4.3 systems can be further customized to meet your needs through programming and expansion modules.

Proven System


Field proven in a wide range of apllications worldwide, fully protype tested, and certified torsional vibration analysis available

CAT G3516H Gas Engine


Robust high speed block design provides prolonged life and lower owning operationg costs. Designed for maximum performance on low pressure pipeline natural gas. Simple open chamber combustion system for reliability and fuel flexibility. Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency. One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection

CAT electronic control system


Simple user friendly interface and navigation. Digital monitoring, metering and protection setting. Fully-featured power metering and protective relaying. Remote control and monitor capability options

EQUIPMENT
Standard Equipment

Control Panels
  • EMCP4.3
Air Inlet
  • Two-element single-stage air cleaner with enclosure and service indicator
  • Package Mounted Air Cleaner with service indicator
  • Package Mounted Air Cleaner with service indicator
Circuit Breakers
  • 4000A, 3-Pole UL Rated
  • 4000A, 3-Pole IEC Rated
Cooling
  • Engine driven water pumps for jacket water and after cooler
  • Jacket water and SCAC driven pumps
  • Jacket water and SCAC driven thermostats
  • 2nd stage SCAC-Cat Flange
  • ANSI Class 150/DN custom flange connections for JW inlet and outlet
Exhaust
  • Dry exhaust manifolds, insulated and shielded
  • Cat-flanged face outlet on turbocharger
  • Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
Fuel System
  • Throttle plate, 24V DC actuator, controlled by GECM
  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
  • Electronic fuel metering valve
Ignition System
  • Electronic Ignition System (controlled by ADEM A4) 
  • Individual Cylinder Detonation Sensitive Timing (DST) 
Generator
  • SR5
  • Permanent Magnet Excitiation
  • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
  • Anti-condensation space heater
  • Reactive Droop
  • Winding temperature detectors
General
  • Paint- Caterpillar Yellow except rails and radiators gloss black 
  • “Stationary Use Only” Label in Correspondence with EPA Nonroad Mobile SI rule 
  • Crankshaft vibration damper and guard
  • Operation and maintenance manuals
  • RH Service
  • Parts book
Governing System
  • ADEM A4 4-20mA (0-5V) Speed Input 

Optional Equipment

Air Inlet
  • Heavy Duty air cleaner with precleaner
  • Mounting brackets and piping
  • Air cleaner with precleaner
Circuit Breakers
  • Frame Mounting
  • Lower & Upper Covers, Extension Box Roof Cover
  • Bus Bar Mounting
  • No UV trip or package mounted CB Wiring
  • MP-Frame 3 Pole Bottom Cable Entry or MP- Frame 6 Pole Bottom Cable Entry   
  • 2500/3000/3200A or 4000/5000A Neutral Current Transformer Automatic Selection 
Control Panels
  • Remote monitoring software
  • Local alarm module
  • Synchronizing module
  • Remote Monitoring & Control
  • Cross-Current Compensation Current Transformer-- 8.7/15 kV Classes
  • Cat Connect: Ehternet, Satellite, Cell Telematics
  • Local/Remote PC Monitorring 
  • RTD Module
  • Remote RS485, 32-light Annunciator
  • 16 Point/32 Light Annunciator with NFPA99-110/CSA282 Configuration
  • Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay
Cooling
  • Jacket water coolant heater
  • Engine pumps
  • Inlet/Outlet connections
Exhaust
  • Flange
  • Elbow
  • Muffler and spark-arresting muffler with ANSI companion flanges
Generator
  • Low voltage extension box
  • Cable access box
  • Bearing temperature detectors
  • Generator air filter
  • Medium and high voltage generators and attachment
  • Manual voltage control
Starting/Charging
  • 24V starting motors
General
  • US AID emblem
  • Special paint order
  • Tool set
  • Digital diagnostic tool
  • Battery with cables and rack (shipped loose)
  • Jacket water heater
  • 60A, 24V charging alternator (requires engine driven pumps)
  • Battery diconnect switch

CALL NOW TO LEARN MORE

Andy Downs
423-463-2131 or 423-698-6943

Neal Reinhardt
865-595-1034 or 865-771-1036