C175-16 TIER 4 FINAL (60 HZ)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.


SPECIFICATIONS
Generator Set Specifications
Minimum Rating 2500 ekW
Maximum Rating 3100 ekW
Emissions/Fuel Strategy U.S. EPA Certified for Non-Emergency Stationary Genset
Voltage 480 to 13800 Volts
Frequency 60 Hz
Speed 1800 rpm
Duty Cycle Standby, Mission Critical, Prime, Continuous


Engine Specifications
Engine Model C175-16 SCAC, V-16, 4-Stroke Water-Cooled Diesel
Bore 6.89 in
Stroke 8.66 in
Displacement 5155.88 in³
Compression Ratio 16:07:01
Aspiration Turbo Aftercooled
Fuel System EUI
Governor Type ADEM™ A4


Generator Set Dimensions
Length - Minimum 242.77 in
Length - Maximum 312.2 in
Width - Minimum 83.1 in
Width - Maximum 123 in
Height - Minimum 87 in
Height - Maximum 142.3 in
Dry Weight - Genset (minimum) 42750 lb
Dry Weight - Genset (maximum) 45114 lb


BENEFITS & FEATURES
Cat Generator Set Package


  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets other NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine


  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

SR5 Alternator


  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

EMCP 4 Control Panel


  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

Cooling System


  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications


  • UL2200 Listed
  • CSA Certified
  • IBC Seismic Certification
  • OSHPD pre-approval

One Safe Source


  • Components used in the generator set are selected at the design stage to provide optimum package performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support


  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

EQUIPMENT
Standard Equipment

Control Panel
  • EMCP4.3
  • Emergency stop button
  • 24-volt DC operation
  • Environmental sealed front face
  • Text alarm / event descriptions
  • Warning / Shutdown with common LED indication of shutdowns with indicating lights for:
  • Low oil pressure
  • High coolant temperature
  • Overspeed
  • Emergency stop
  • Failure to start (overcrank)
  • Low coolant level (requires optional coolant sensor)
  • Generator mounted - rear facing
  • Controls:
  • Speed adjust
  • Auto/start/stop control
  • Engine cool-down timer
  • Engine cycle crank
  • Alarm acknowledge
  • Lamp test
  • True RMS AC metering, 3-phase, +/-0.25% accuracy
  • Digital indication for:
  • RPM
  • DC volts
  • Operating hours
  • Coolant temperature
  • Volts (L-L & L-N)
  • Frequency (Hz)
  • Amps (per phase & average)
  • Power Factor (per phase & average)
  • kW (per phase, average & percent)
  • kVA (per phase, average & percent)
  • kVAr (per phase, average & percent)
  • kW-hr (total)
  • kVAr-hr (total)
  • Warning/shutdown with common LED indication of shutdowns for:
  • Low oil pressure
  • High coolant temperature
  • Overspeed
  • Emergency stop
  • Failure to start (overcrank)
  • Low coolant temperature
  • Low coolant level Over / Under voltage (27/59)
  • Over / Under frequency (81 o/u)
  • Reverse power (kW) (32)
  • Reverse reactive power (kVAr) (32RV)
  • Overcurrent (50/51)
  • Communications
  • Customer data link (Modbus RTU)
  • Accessory module data link
  • Serial annunciator module data link
  • 6 Programmable digital inputs
  • 4 Programmable relay outputs (Form A)
  • 2 Programmable relay outputs (Form C)
  • 2 Programmable digital outputs
  • 12 Programmable digital inputs
  • 16 Programmable digital outputs
  • 3 Programmable analog inputs
  • 3 Programmable analog outputs
  • 2 Programmable PWM outputs
  • Local annunciator option
Cooling System
  • SCAC cooling
  • Radiator group shipped loose
  • Fan and belt guards
  • Coolant drain line and valves
  • Coolant sensor - (2 x shipped loose: 1/4-18 and 1/2-14 NPTF)
Exhaust System
  • Insulated CEM
  • CEM dosing module
  • CEM dosing module features:
  • Air filter
  • DEF filter
  • 120 VAC
  • Anti-freeze protection
  • Harness from dosing module to CEM
  • Air and heated DEF lines from dosing module to CEM
  • Dry exhaust manifold
  • Flanged faced outlets at CEM in (21.2") and out (25")
Fuel System
  • Primary fuel filter water / fuel water separator
  • 10 Micron spin on type
  • 3 Filters, shipped loose - can be mounted on frame rails (Requires dealer provided flex)
  • Secondary / tertiary fuel filters
  • 4 Micron Spin On Type
  • 3 Filters, engine mounted
Generator and Attachments
  • 3 Phase brushless, salient pole
  • 6 Lead
  • IEC platinum stator RTDs (.00385 temperature coefficient)
  • Caterpillar's digital voltage regulator (CDVR) includes:
  • Reactive droop capability
  • 3-Phase voltage sensing
  • KVAR / PF modes
  • RFI suppression
  • Min / Max exciter limiter
  • Exciter diode monitor
  • 1800 Frame generators (LV/MV)
  • Form wound
  • NEMA Class H insulation
  • Class H temperature rise at 40C ambient (125C prime / 150C standby)
  • (LV) Busbar connections, top / center mounted, top cable entry 60 Hz models: NEMA standard hole pattern
  • (MV) Busbar connections, right side extension box, bottom cable entry: - 60 Hz models: NEMA standard hole pattern
  • 3000 Frame generators (MV/HV)
  • Form wound
  • Permanent magnet
  • Anti condensation space heater
  • NEMA Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
  • Right side extension box, bottom cable entry
Governing System
  • ADEM A4
  • Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
Lube System
  • Lubricating oil
  • Gear type lube oil pump
  • Integral lube oil cooler
  • Oil filter, filler and dipstick
  • Oil drain lines and valve
  • Fumes disposal
  • Prelube - required with prime and continuous; optional with standby
Mounting System
  • Rails - Engine / Generator
  • Rubber anti-vibration mounts (shipped loose)
  • Dual 24-volt electric starting motors
  • Batteries and battery rack w/cables
  • Battery disconnect switch
Service Instructions
  • Two PM Inspections
General
  • Paint - Caterpillar yellow with high gloss black rails & radiator
  • RH Service (except oil filter service 60 Hz models: left hand service
  • Flywheel and flywheel housing-SAE No. 00
  • SAE standard rotation
  • *For HV EMCP4.3 control panel: Includes wall mount control panel, shipped loose, for customer mounting and 7.5 meter interconnect harness.
  • * For HV applications, customer to provide 120V secondary sensing, 5A secondary current sensing and harness between package and EMCP4.3 (drawing provided). CDVR is installed in wall mount.
Air Inlet System
  • Air Cleaner; 4 x single element canister with service indicator(s).
  • Single stage air cleaner

Optional Equipment

Air Inlet System
  • Single stage air cleaner
Control Panels
  • EMCP 4.4 (requires 1800 frame low voltage package)s
  • E-Stop - Only for use with 3000 frame generators and EMCP4.3
  • Load share module
  • EMCP mounting location - LV / MV (requires 1800 frame generator)
  • Customer AC-DC connection mounting location - LV / MV
  • Load share governor / auxiliary plate and auxiliary box (LV)
  • Remote speed adjust
  • Annunciator modules
  • Customer interface options
  • Generator temperature monitoring
  • Modbus monitoring of packages
  • Vandal proof panel door
Cooling System
  • Package mounted radiator
  • Remote radiators
  • SCAC circuits
  • Fuel cooler
Exhaust
  • Exhaust collectors / manifold
Fuel System
  • Primary fuel filter
General
  • Paint - colors (other than Caterpillar yellow) or high performance paints
  • US aid emblem
Generator and Attachments
  • 480 Volts, Generators (LV) 60 Hz, 3 phase, 1800 rpm, FW, PM, 6 leads, pitch = 0.6667 - 1800 frame
  • 480 Volts, Generators (MV) 60 Hz, 3 phase, 1800 rpm, FW, PM, 6 leads, pitch = 0.6667 -- 1800, 3000 frame
  • Space heater kit
  • Thermostat for space heater
  • Differential current transformers (DCT): - 5, 9 and 15 kV class DCTs
Instrumentation
  • Pyrometer and thermocouples
  • Harness - ECM interconnect
Lube System
  • Lube oil heater
  • Oil pan drain valve
  • Standard sump oil pan
  • Lubricating oil
  • Electric prelube pump
  • Oil filters
Crankcase Systems
  • Explosion relief valves
Mounting System
  • Rubber anti-vibration mounts
  • Spring-type linear vibration isolators
  • IBC vibration isolators - shipped loose
Power Connections
  • Center post busbars (LV) connections
  • Side / Rear monted busbars (LV)
  • Cable entry options (LV)
  • Control packaging (LV) - Enclosures
  • Power connection covers
  • Optional package mounted circuit breakers (LV)
  • 4000 Amp, 3 Pole, UL-100% rated circuit breakers
  • 4000 Amp, 3 Pole, IEC-Rated circuit breakers
  • 5000 Amp, 3 Pole, UL-100% rated circuit breakers
  • 5000 Amp, 3 Pole, IEC-rated circuit breakers
  • Circuit Breaker Harness
  • MV Power Connection Options: 1800 Frame generator side / rear mounted busbars - Left hand MV nema busbar - Right hand MV nema busbar
  • Cable entry options - 1800 frame (MV)
  • Neutral ground - (MV)
  • Masterpack breaker connections
Service Tools - Barring Groups
  • Engine group
  • Group manual
  • Engine air powered
  • Control GP-airpowered group
Special Tests / Reports
  • Generator test report
  • PGS test report @ 1.0 power factor
  • PGS test report @ 0.8 power factor
  • Standard genset torsional vibration analysis (TVA) report
  • Custom genset TVA report
  • Fuel consumption test
  • Standard engine test charge
Starting/Charging
  • 24 Volt power distribution box
  • 24 Volt electric starting motor
  • Air starting motor
  • Covers - starter locations
  • 24 Volt battery set - dry
  • Heavy duty battery set with rack
  • 35 and 50 Amp battery chargers
  • Jacket water heaters
  • Jacket water heater wiring groups
  • Jacket water heater wiring groups

CALL NOW TO LEARN MORE

Andy Downs
423-463-2131 or 423-698-6943

Neal Reinhardt
865-595-1034 or 865-771-1036