3516E (50 HZ)

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.


SPECIFICATIONS
Generator Set Specifications
Minimum Rating 2750 kVA
Maximum Rating 3000 kVA (3100 kVA without fan)
Emissions/Fuel Strategy Low Fuel Consumption
Voltage 380 to 11000 volts
Frequency 50 Hz
Speed 1500 rpm
Duty Cycle Standby, Mission Critical, Prime


Engine Specifications
Engine Model 3516E, SCAC, V-16, 4-Stroke, Water-Cooled Diesel
Bore 6.69 in
Stroke 8.46 in
Displacement 4766 in
Compression Ratio 14:01
Aspiration TA
Fuel System Electronic unit injection
Governor Type Adem™5


Generator Set Dimensions
Length - Maximum 296.8 in
Width - Maximum 87.2 in
Height - Maximum 133.5 in
Dry Weight - Genset (maximum) 43541 lb


BENEFITS & FEATURES
Cat Generator Set Package


Cat Generator Set Package
  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets other NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

  • Cat Diesel Engine


    Cat Diesel Engine
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

  • SR5 Alternator


    SR5 Alternator
  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

  • EMCP 4 Control Panel


    EMCP 4 Control Panel
  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

  • Cooling System


    Cooling System
  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

  • Certifications


    Certifications
  • IBC Seismic Certification
  • EU Certification of Conformance (CE)
  • EEC Declaration of Conformity

  • One Safe Source


    One Safe Source
  • Components used in the generator set are selected at the design stage to provide optimum package performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

  • World Wide Product Support


    World Wide Product Support
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

  • EQUIPMENT
    Standard Equipment

    Air Inlet System
    • Single element canister type with service indicator
    • Air cleaner
    Air Inlet
    • Air Cleaner
    Control Panel
    • EMCP 4 Genset Controller
    • Reverse reactive power (kVAr) (32RV)
    • RPM
    • 24-volt DC operation
    • Coolant temperature
    • Low oil pressure
    • kVA (per phase, average & percent)
    • Low coolant level
    • Generator mounted - rear facing
    • Over / under frequency (81 o/u)
    • Failure to start (overcrank)
    • Low coolant temperature
    • Operating hours
    • Engine cycle crank
    • Emergency stop pushbutton
    • Lamp test
    • Amps (per phase & average)
    • Programmable protective relaying functions:
    • Serial annunciator module data link
    • Over / under voltage (27/59)
    • Alarm acknowledge
    • Panel lights
    • kW-hr (total)
    • kW (per phase, average & percent)
    • Generator phase sequence
    • Engine cool-down timer
    • kVAr-hr (total)
    • EMCP4.2 controller includes:
    • Digital indication for:
    • Communications:
    • Reverse power (kW) (32)
    • True RMS AC metering, 3-phase, +/-2% accuracy
    • Text alarm / event descriptions
    • Speed adjust
    • Volts (L-L & L-N)
    • High coolant temperature
    • 4 programmable relay outputs (Form A)
    • 6 programmable digital inputs
    • Oil pressure (psi, kPa or bar)
    • Controls:
    • Environmental sealed front face
    • Power Factor (per phase & average)
    • 2 programmable relay outputs (Form C)
    • kVAr (per phase, average & percent)
    • Accessory module data link
    • DC volts
    • Emergency stop
    • Customer data link (Modbus RTU)
    • Overspeed
    • 2 programmable digital outputs
    • Frequency (Hz)
    • Warning/shutdown with common LED indication of shutdowns for:
    • Overcurrent (50/51)
    • EMCP 4.2
    Exhaust
    • Exhaust flange outlet
    Fuel
    • Fuel priming pump
    • Secondary fuel filter
    • Primary fuel filter with integral water separator
    Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
    Power Termination
    • Bus Bar
    Starting/Charging
    • Heavy-duty starting system
    • Charging alternator
    Cooling
    • Package mounted radiator
    Cooling System
    • JWAC
    • Coolant drain line with valve
    • Caterpillar Extended Life Coolant
    • Coolant level sensors
    • Fan and belt guards
    • Radiator fan and fan drive
    Exhaust System
    • Dry exhaust manifold
    • Flanged faced outlet(s)
    Fuel System
    • Flexible fuel lines - shipped loose
    • Secondary fuel filters
    • Fuel cooler; not included with packages without radiator
    • Fuel priming pump
    Generators and Attachments
    • NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby).
    • Bus bar connections, top center mounted, top cable entry
    • IEC standard hole pattern
    • Winding temperature detectors
    • 3 phase brushless, salient pole
    • 6 lead
    • Internal excitation
    • Generator set packages include Caterpillar's Digital Voltage Regulator (CDVR). CDVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter
    • Random wound
    Governing System
    • ADEM III
    Literature
    • English
    Lube System
    • Integral lube oil cooler
    • Oil drain lines and valve
    • Fumes disposal
    • Gear type lube oil pump
    • Lubricating oil
    • Oil filter, filler and dipstick
    Mounting System
    • Rubber anti-vibration mounts (shipped loose)
    • Rails - engine / generator / radiator mounting
    Starting / Charging System
    • Battery disconnect switch
    • 24 Volt electric starting motor
    • Battery and battery rack w/cables
    General
    • Paint - Caterpillar Yellow except rails and radiators gloss black
    • Right hand servicing
    • SAE standard rotation
    • Paint: Caterpillar yellow with high gloss black rails & radiator
    • Flywheel and flywheel housing-SAE No. 00

    Optional Equipment

    Air Inlet System
    • Air inlet protection
    • Heavy duty air cleaners
    • Remote air inlet adapters
    • Dual element air cleaners
    Power Termination
    • Circuit breakers, IEC compliant
    Circuit Breakers
    • Optional busbar power connections
    • Load take off; IEC standard hole
    • Center posts busbars
    • Control packaging for enclosures
    • Trip Units
    • EMAX breakers
    • Cable entry options
    Control Panels
    • Generator temperature monitoring
    • Vandal proof panel door
    • Local and remote monitoring
    • Governors
    • Auxiliary box
    • Busbar connections
    • Customer interface options
    • Language options
    • Annunciator modules
    • Voltage raise / lower switch
    • Remote speed adjust
    • External box clips
    • EMAX breaker connections
    • EMCP 4.3, EMCP 4.4
    Cooling System
    • Radiator duct flanges
    • Optional Serpentine radiators
    • Water level switch gauges
    • Heat exchangers
    European Certifications
    • EU declaration of conformity
    Exhaust System
    • Flexible fittings
    • Mufflers
    • Muffler mounting kits
    • Through wall installation kit
    Fuel System
    • Primary fuel filter
    • Fuel coolers
    Generators and attachments
    • Internal excitation
    • Random wound
    • 3 Phase, 380 / 400 / 415 / 3300 / 6600 / 10000 / 10500 / 11000 volt
       
    • Optional generators
    • 3 Phase, Random wound, Internal excitation
    • Number of leads: 6
    • Pitch: 0.6667
    Instrumentation
    • Pyrometers and thermocouples
    • Thermocouples
    Lube System
    • Electric prelube pumps
    • Oil level regulator
    • Manual prelube sump pumps
    Mounting System
    • Spring type vibration isolators
    • IBC vibration isolators
    Protection System
    • Explosion relief valves
    Special Tests / Reports
    • CSA test and certification
    • PGS test report @ 1.0 power factor
    • IBC seismic certificate
    • Neutral ground certificate
    • PGS test report @ 0.8 power factor
    Starting / Charging System
    • ETHER starting aids
    • Jacket water heaters
    • Dual 24 volt electric starting motors
    • 10 and 20 amp battery chargers
    • Charging alternators - 50 Amp
    • 24 Volt battery sets - Dry
    General
    • Engine barring group

    CALL NOW TO LEARN MORE

    Andy Downs
    423-463-2131 or 423-698-6943

    Neal Reinhardt
    865-595-1034 or 865-771-1036