C18 Tier 4 Final Oil Field Genset

General Specifications

Displacement 1106.36in³
Bore 5.7in
Flywheel and Flywheel Housing SAE No. 0
Rating 528BHP
RPM 1800r/min
Rotation from Flywheel End Counterclockwise
Aspiration Turbocharged-Aftercooled
Governor and Protection Electronic (ADEM™ A4)
Stroke 7.2in

Emissions

Emissions U.S. EPA/CARB Tier 4 Final/Stage IV

Dimensions

Height 93.5in
Width 72in
Weight 12196lb
Length 144in

Standard Equipment

  • Aftertreatment
    • Clean Emission Module, Exhaust Pipe Kits, Elbows, Shields, CEM Mounts and CEM Interconnect Harness Pump Electronic Tank Unit (PETU) via DTO
  • Air Inlet System
    • Air Cleaners
    • Air Shut-Off via DTO
  • Control System
    • EMCP 4.4 Control Panel
  • Control Panels
    • EMCP 4.4 Control Panel
  • Cooling System
    • Thermostats and Housing, full open temp. 92 C (198 deg F)
    • Jacket Water Pump, gear driven, centrifugal
    • Radiator available via DTO
  • Flywheels And Flywheel Housing
    • Flywheel & Flywheel Housing, SAE No. 0
  • Fuel System
    • Fuel Priming Pump
    • Flex Fuel Lines
    • Flex Transfer Pump
    • Primary Fuel Filter with integral Water Separator options
  • Generators And Generator Attachments
    • Generator available via DTO
  • Governing System
    • ADEM A4
  • Lube System
    • Sump Oil Pan
    • Oil Filter
    • Oil Filler - LH Front
    • Oil Dip Stick - LH
    • Oil Drain Valves
    • Fumes Disposal - left side
    • Gear-type lube Oil Pump
    • Oil Cooler
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • Mounting System
    • Base available via DTO
  • Starting System
    • Starter available via DTO
  • General
    • Paint, Caterpillar Yellow
    • Vibration Damper
    • Engine Lifting Eyes

Optional Equipment