16CM46DF

Standard Equipment

• Engine

  Motor-driven barring gear, fitted on engine Emergency shutdown equipment with push button for manual emergency stop

• Cylinder Head

  Fuel injector and integrated gas admission valve with easy service and maintenance access Cylinder pressure sensors for highest operational reliability and efficiency, replacing conventional knocking sensor technology Piston, rings and liners designed for operation on gas and liquid fuels

• Turbocharger

  Optimized engine efficiency in gas and diesel operation Blow-off valve and waste gate technology for optimized air-fuel ratio control

• Gas System

  Double-walled gas piping to support an inherently safe engine room concept Leakage detection Gas valve unit Segmented gas detection system on request

• Micro Pilot Fuel Injection System

  Gear driven high pressure fuel pump and filter system with easy service access Reliability combined with service and maintenance simplicity, through individual ignition fuel injector and “in-cylinder head” integrated ignition fuel return pipes

• Exhaust System

  Front-mounted turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device Expansion joint separate Separate silencer and spark arrester

• Fresh Cooling Water System

  HT pump, fitted on engine LT pump, separate, vertical design, electric motor driven HT thermostat, remote-mounted, electric controlled Cooling water preheating equipment, fitted on base frame

• Lubricating Oil System

  Safety filter fitted on engine Force pump, fitted on engine Pre-lubrication pump, fitted on base frame, electric motor driven Automatic back-flushing filter Duplex filter with differential pressure indication, fitted on engine Pressure control valve, fitted on engine Thermostat, remote-mounted, electric controlled

• Connections

  Set of connecting parts between flange coupling and flywheel Flexible flange coupling between engine and generator Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator Mounting of engine and generator on the base frame Set of bonded rubber rails for resilient mounting of the base frame Set of flexible pipe connections

• Instrumentation

  Gauge board with liquid-dampened pressure gauges for: fuel, lubricating oil, fresh water, starting air and charge air. On-engine thermometers for fuel, lubricating oil, fresh water and charge air Electric remote speed indicator Turbocharger and remote speed indicator Exhaust gas temperature indicator

• Monitoring

  Manual control on engine, including: control panel with start/stop key, speed setting device, mechanical shutdown device, changeover of control functions from engine to remote control Starting solenoid valve on engine, 24 V DC Separate electronic speed governor

Optional Equipment