16CM43C Offshore Generator Set

Standard Equipment

• Engine

  Motor-driven barring gear, fitted on engine Reversing contractor and push button switch with cable Electronic speed setting equipment with actuator and speed pick-up Emergency shutdown equipment with pushbutton, separate, for manual emergency stop

• Engine Indicators

  Gauge board with set liquid damped pressure gauges for: fuel, lubricating oil, fresh water, starting air, and charge air. On-engine thermometers for fuel, lubricating oil, fresh water, and charge air Electric remote speed indicator Turbocharger and remote speed indicator Exhaust gas temperature indicator

• Control

  Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control Starting solenoid valve on engine, 24 V DC Separate electronic speed governor

• Monitoring For Unattended Operation

  Pressure switches, mounted on engine, for: Switches for: Control Cabinet with housings for wall mounting, including:

• Starting Air System

  Separate non-return valve for the starting air pipe to the engine

• Air Intake System

  Air intake filter, fitted on the turbocharger Air bottles, separate

• Fuel System

  Separate circulating pump driven by electric motor, horizontal or vertical Duplex filter with differential pressure indication

• Exhaust System

  Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device Expansion joint separate Separate silencer and spark arrester, unlagged 35 dB(A)

• Fresh Cooling Water System

  HT pump, fitted on engine LT pump, separate, vertical design, electric motor driven HT thermostat, not powered and separate Engine preheating equipment, fitted on base frame

• Lubricating Oil System

  Plate cooler, fitted on engine Force pump, fitted on engine Prelubrication pump, fitted on base frame, electric motor driven Boll and Kirch automatic backflushing filter, separate Duplex filter with differential pressure indication, separate Pressure control valve, separate Thermostat, not powered, separate

• Connecting Parts - Engine

  Set of connecting parts between flange coupling and flywheel Flexible flange coupling between engine and generator Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator Mounting of engine and generator on the base frame Set of bonded rubber rails for resilient mounting of the base frame Set of flexible pipe connections

• Tools

  Set of tools for the engine including hydraulic tightening tools and nozzle tester Set of tools for turbocharger Inside micrometer for cylinder liners Ruler for cylinder liner

• Spare Parts

  Set of engine spare parts for unrestricted operation Set of spare flexible pipe connections

Optional Equipment