+
The M 25 C, part of the MaK long-stroke engine generation, is based on the proven design characteristics of the M 20 C, M 32 C and M 43 C engine series. When developing this new engine generation, the objective was to achieve a high benefit level for the customer. In all design and development considerations, therefore, three criteria had the highest priority: reliability, economy and environmental compatibility. Other points of significance in the engine’s design and development work were ease of maintenance, long maintenance intervals, long component life and ease of installation.
Power Range | 1740-3000 kW |
Speed Range | 720-750 rpm |
Emissions | IMO II |
Aspiration | Turbocharged |
Bore | 10in |
Stroke | 15.78in |
Rotation from Flywheel End | Counterclockwise/Clockwise |
Configuration | Inline 6,8,9 Cylinder |
Swept Volume | 1244.89in³ |
Minimum Dry Weight | 46738lb |
Minimum Length | 210.4in |
Maximum Length | 264.5in |
Minimum Height | 133.3in |
Maximum Height | 148.4in |
Minimum Width | 88.1in |
Maximum Width | 90.2in |
Air Inlet System |
|
Control System |
|
Cooling System |
|
Exhaust System |
|
Fuel System |
|
Instrumentation |
|
Lube System |
|
Mounting System |
|
Starting System |
|
General |
|
Air Inlet System |
|
Control System |
|
Cooling System |
|
Exhaust System |
|
Fuel System |
|
Lube System |
|
Mounting System |
|
Starting System |
|
General |
|