Photovoltaic Module PVC

Standard Equipment

• Power Assurance Program For Linear Power Output.

  Produces more than 97.5% power in the first year and after 25 years 85.5%.

• Durability Test Cycle (accelerated Tests)

  2000 hrs damp heat testing is twice the standard testing hrs. required 600 thermal cycling testing is three times the standard cycles required. 192 hrs of PID (potential-induced degradation) at 85°C/85RH) is twice the standard testing hrs. required. Mechanical Load testing for Dynamic + Thermal Cycle + Humidity Freeze result in much less cell breakage and power loss than static testing alone. 60-100 kWh/m2 LID (light-induced- degradation) validates early hour performance. LeTID (light and elevated temperature degradation) is a proprietary validation for long term PERC performance. Validated for use in harsh environment by IEC testing for salt mist, amonia, dust and sand.

Optional Equipment