+
Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The Cat 990 Wheel Loader has been a proven performer in mines, quarries and industrial applications around the world. The 990K brings all new levels of performance, safety, operator comfort and efficiency.
Net Power | 699HP |
Engine Model | C27 Cat® |
Bore | 5.4in |
Stroke | 6in |
Displacement | 1649.5in³ |
Torque Rise | 18% |
Rated Speed | 1,800/min |
Rated Speed - Net Power - SAE J1349 - Standard Ambient | 699HP |
Rated Speed - Net Power - SAE J1349 - High Ambient | 648HP |
Rated Speed - Gross - SAE J1995 | 766HP |
Net Power - SAE J1349 | 699HP |
Emissions | U.S. EPA Tier 4 Final OR Tier 2 Equivalent |
Rated Speed - Gross - ISO 14396 | 752HP |
Gross - ISO 14396 | 752HP |
Peak Torque - 1,200 rpm | 2624lb/ft |
Operating Weight | 178517lb |
Rated Payload - Loose Material (Standard) | 20ton (US) |
Rated Payload - Loose Material (High Lift) | 22ton (US) |
Rated Payload - Standard (Quarry Face) | 17.5ton (US) |
Rated Payload - High Lift (Quarry Face) | 17.5ton (US) |
Bucket Capacity Range | 8,6 m³ – 10,0 m³ (11,25 yd³ – 13,0 yd³) |
Cat Truck Match - Standard | 773-775 |
Cat Truck Match - High Lift | 775-777 |
Bucket Capacities | 7,4-14,9 m³ (9,7-19,5 yd³) |
Transmission Type | Cat-Planetenlastschaltgetriebe |
Forward - 1 | 4.5mile/h |
Forward - 2 | 8.3mile/h |
Forward - 3 | 14.2mile/h |
Reverse - 1 | 4.9mile/h |
Reverse - 2 | 9.1mile/h |
Reverse - 3 | 15.5mile/h |
Direct Drive - Forward 1 | Lock-up disabled |
Direct Drive - Forward 2 | 8.5mile/h |
Direct Drive - Forward 3 | 15.2mile/h |
Direct Drive - Reverse 1 | 5.4mile/h |
Direct Drive - Reverse 2 | 9.6mile/h |
Direct Drive - Reverse 3 | 16.4mile/h |
Note | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | 8.5° |
Raise | 8.2s |
Dump | 2.9s |
Lower Float Down | 3.6s |
Lower | 3.7s |
Total Hydraulic Cycle Time - Empty Bucket | 13.8s |
Rack Back | 4.3s |
Fuel Tank | 294.3gal (US) |
Cooling System | 54.9gal (US) |
Transmission | 29.1gal (US) |
Hydraulic Tank - Implement and Hydraulic Fan | 68.9gal (US) |
Differential - Final Drives - Rear | 68.9gal (US) |
Differential - Final Drives - Front | 71.6gal (US) |
Hydraulic Tank - Steering and Braking | 34.9gal (US) |
Engine Crankcase | 20gal (US) |
Hydraulic System Factory Fill | 210gal (US) |
Note | All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l |
Pilot System | Open loop and pressure reducing |
Maximum Flow at 1,800 rpm (1) | 216gal/min |
Cylinders, Double Acting - Lift, Bore and Stroke | 235 mm × 1287 mm (9.3 in × 50.7 in) |
Relief Valve Setting - Lift/Tilt | 4786psi |
Maximum Flow at 1,800 rpm (2) | 22.2gal/min |
Relief Valve Setting - Main | 507psi |
Lift/Tilt System - Circuit | Positive flow control |
Cylinders, Double Acting - Tilt, Bore and Stroke | 292.1 mm × 820 mm (11.5 in × 32.3 in) |
Lift/Tilt System | Variable displacement piston |
Operator Sound Level (ISO 6396:2008) | 69dB(A) |
Machine Sound Level (ISO 6395:2008) | 113dB(A) |
Machine Sound Level (ISO 6395:2008) | 115dB(A) |
Operator Sound Level (ISO 6396:2008) | 69dB(A) |
Total Steering Angle | 70° |
Steering System - Pump | Piston, variable displacement |
Steering System - Circuit | Pilot, load sensing |
Steering | ISO 5010: 2007 |
Relief Valve Setting - Steering | 4641psi |
Maximum Flow at 1,400 rpm | 94.5gal/min |
ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
Brakes | ISO 3450: 2011 |
Note |
|
Operator Environment |
|
Power Train |
|
Electrical |
|
Other |
|
Note |
|
Power Train |
|
Operator Environment |
|
Miscellaneous Attachments |
|