+

914M Compact Wheel Loader

The Cat® 914M Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a toolcarrier.

Engine

Maximum Gross Power 100HP
Net Power 97HP
Maximum Gross Power - SAE J1995 102HP
Rated Net Power - Rated Engine Speed 2200r/min
Rated Net Power - SAE J1349 96HP
Maximum Gross Power - ISO 14396 100HP
Maximum Gross Power - Maximum Engine Speed 2350r/min
Maximum Gross Power - ISO 14396 (DIN) 101HP
Engine Model Cat C4.4 ACERT�
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Stroke 5in
Displacement 268in³
Maximum Gross Torque - SAE J1995 336ft·lbf
Rated Net Power - ISO 9249 97HP
Maximum Gross Torque - ISO 14396 332ft·lbf
Rated Net Power - ISO 9249 (DIN) 98HP
Bore 4.13in
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Weights

Operating Weight 19315lb

Buckets

Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)

Operating Specifications

Rated Bucket Capacity 2.5yd³

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.

Service Refill Capacities

Cooling System 5.7gal (US)
Fuel Tank 40.7gal (US)
Hydraulic System - Including Tank 25.9gal (US)
Engine Crankcase 2.3gal (US)
Diesel Exhaust Fluid (DEF) Tank 5gal (US)
Axles - Front Center Differential 2gal (US)
Transmission 0.9gal (US)
Hydraulic Tank 14.5gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential 2gal (US)

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach 1.4s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32gal/min
Maximum Flow - Implement Pump 39gal/min
Relief Pressure - Tilt Cylinder 4931psi
Hydraulic Cycle Time - Rackback 2.2s
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046psi
Hydraulic Cycle Time - Total Cycle Time 12.5s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046psi
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24gal/min
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24gal/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7s
Maximum Working Pressure - Implement Pump 4061psi

Tires

Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Standard Size 17.5-25 12PR
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (1) Other tire choices are available. Contact your Cat dealer for details.

Steering

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75turns
Maximum Working Pressure - Steering Pump 3263psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8s
Maximum Flow - Steering Pump 22gal/min
Steering Articulation Angle - Each Direction 40°

Transmission

Forward and Reverse - High Range 25mile/h
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Low Range, Speed Range 1* 6.3mile/h
Forward and Reverse - Low Range, Speed Range 2* 12.5mile/h

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349 325ft·lbf
Maximum Net Torque - ISO 9249 329ft·lbf

Axles

Front Fixed; Locking differential (standard)
Rear Oscillating �11 degrees; Locking differential (Standard)

Standard Equipment

Optional Equipment