+

TL642D Telehandler with Stabilizers

The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Operating Specifications

Rated Load Capacity 6500lb
Maximum Lift Height 42ft
Maximum Forward Reach 30ft
Top Travel Speed 20mile/h
Capacity at Maximum Height (o/r Up) 6000lb
Capacity at Maximum Reach (o/r Down) 1700lb
Capacity at Maximum Reach (o/r Up) 600lb
Capacity at Maximum Height (o/r Down) 6500lb
Turning Radius - Over Tires 12ft
Drawbar Pull - Loaded 19783lbf
Frame Leveling 10°

Engine

Engine Model Cat® C3.4B
Gross Power - Basic 100HP
Note Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight 22928lb

Tires

Standard 370/75-28 Air Duraforce
Optional (1) 370/75-28 Foam Duraforce
Optional (4) 13.00 × 24 Solid
Optional (3) 13.00 × 24-12 PR Foam Filled
Optional (2) 13.00 × 24-16 PR Air

Service Refill Capacities

Fuel Tank 38.3gal (US)
Diesel Exhaust Fluid (DEF) Tank 5.7gal (US)
Hydraulic System 42gal (US)

Boom Performance

Boom Up 15.5s
Boom Down 10.7s
Tele In 11.8s
Tele Out 17s

Hydraulic System

Gear Pump Single-section
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure 3770psi
Auxiliary Hydraulic Pressure 3481psi
Auxiliary Hydraulic Flow 18gal/min

Braking System

Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles

Axles

Type (1) Trunnion mounted planetary 55 degree steer axles
Type (2) High bias limited slip differential on front axle

Work Tools

Carriages - Standard Rotate 50in
Pallet Forks - Option 3 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Wide Tilt 72in
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Standard Tilt 50in
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Dual Fork Positioning 50in
Carriages - Side Shift 48in
Carriages - Wide Rotate 72in
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Hydraulic IT Coupler Includes Auxiliary Electrics
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)

Transmission Speeds

Forward 4 speed
Reverse 3 speed

Standard Equipment

Optional Equipment