Cat Wheel Dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. Engineered for your demanding work in large dozing applications, the 854K Wheel Dozer is the largest in the Cat Wheel Dozer line and is an ideal match for large mining operations, power generating utilities, the general contracting industry and wherever mobility, versatility and compaction is needed.
| Engine Model | Cat® C32 ACERT™ |
| Gross Power | 907HP |
| Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 | 900HP |
| Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 | 814HP |
| Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 | 907HP |
| Emissions (Tier 2 Equivalent): Net Power ISO - 9249 | 814HP |
| Rated Speed | 1750r/min |
| Bore | 5.7in |
| Stroke | 6.4in |
| Displacement | 1958in² |
| Peak Torque - 1,200 rpm | 3139lb/ft |
| Torque Rise | 30% |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (2) | Net torque rise meets SAE J139. |
| Note (3) | No engine derating required up to 3050 m (10,000 ft) altitude. |
| Operating Weight | 224254lb |
| Transmission Type | Cat Planetary Power Shift |
| Converter Drive - Forward 1 | 4.4mile/h |
| Converter Drive - Forward 2 | 7.7mile/h |
| Converter Drive - Forward 3 | 13.2mile/h |
| Converter Drive - Reverse 1 | 4.8mile/h |
| Converter Drive - Reverse 2 | 8.4mile/h |
| Converter Drive - Reverse 3 | 14.6mile/h |
| Direct Drive - Forward 1 | Lock-up disabled |
| Direct Drive - Forward 2 | 8.1mile/h |
| Direct Drive - Forward 3 | 14.2mile/h |
| Direct Drive - Reverse 1 | 5mile/h |
| Direct Drive - Reverse 2 | 8.9mile/h |
| Direct Drive - Reverse 3 | 15.6mile/h |
| Note | Travel speeds based on 45/65-45 L-5 46 ply tires. |
| Output at 1,850 rpm and 6900 kPa (1,000 psi) | 161gal/min |
| Cylinders, Double Acting - Lift, Bore and Stroke | 177 mm × 1760 mm (0.58 ft × 5.8 ft) |
| Cylinder, Double Acting - Tilt and Tip, Bore and Stroke | 267 mm × 286 mm (0.88 ft × 0.94 ft) |
| Relief Valve Setting - Lift (Large Pump) | 3289psi |
| Relief Valve Setting - Tilt (Small Pump) | 3560psi |
| Fuel Tank - Standard | 413gal (US) |
| Cooling System | 53gal (US) |
| Crankcase | 32gal (US) |
| Transmission | 45gal (US) |
| Differential - Final Drives - Front | 98gal (US) |
| Differential - Final Drives - Rear | 90gal (US) |
| Hydraulic System - Implement and Brakes - Tank Only | 81gal (US) |
| Hydraulic System - Steering and Engine Cooling Fan - Tank Only | 77gal (US) |
| Front | Fixed |
| Rear | Oscillating at ±10 degrees |
| Maximum Single-Wheel Rise and Fall | 22.6in |
| Brakes | Meets ISO 3540:2011 |
| Blade Capacities | 25 to 45 m³ (33 to 58 yd³) |
| Air Conditioning | Standard air conditioning system contains environmentally friendly R134a refrigerant |
| Cab - ROPS/FOPS (1) | Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan. |
| Cab - ROPS/FOPS (2) | SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005 |
| ROPS | ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria. |
| FOPS | FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria. |
| Sound Performance (1) | The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. |
| Sound Performance (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A). |
| Sound Performance (3) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
| Sound Performance (4) | The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A). |
| Minimum Turning Radius | 31ft |
| Total Steering Angle | 86° |
| Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi) | 124gal/min |
| Relief Valve Setting | 5004psi |
| Serial Number Prefix | KK6 |
| Serial Number Prefix | RM6 |
| Height - Top of ROPS | 18.25ft |
| Height - Top of Exhaust Pipe | 17.17ft |
| Height - Top of Hood | 13ft |
| Ground Clearance | 27in |
| Centerline of Front Axle to Hitch | 9.67ft |
| Centerline of Rear Axle to Edge of Bumper | 13.75ft |
| Wheel Base | 19.25ft |
| Length - With Blade on Ground | 44ft |
| Note |
|
| Electrical |
|
| Operator Environment |
|
| Power Train |
|
| Other Standard Equipment |
|
| Tires, Rims, And Wheels |
|
| Antifreeze |
|
| Note |
|
| Blades |
|
| Electrical |
|
| Operator Environment |
|
| Starting Aids |
|
| Machine Control And Guidance |
|
| Miscellaneous Attachments |
|
Print
Email
your location
call us
contact us