613C SERIES II

The 613C Series II Elevating Scraper is a versatile, fast machine with a two-speed elevator drive and high hydraulic horsepower for maximum hauling and loading performance.


SPECIFICATIONS
Engine
Flywheel Power: Tractor/Scraper 131 kW (175 hp)
Tractor Engine Cat® 3116
Net Power - Gears 1 - 2 175 hp
Net Power - Gears 3-8 175 hp
Gross Power - Gears 1 - 2 187 hp
Bore 4.13 in
Stroke 5 in
Displacement 403 in3
Net Power 175 hp


Scraper Bowl
Scraper Capacity: Heaped 11 yd3
Rated Load 26400 lb
Capacity Struck 8.9 yd3
Depth of Cut - max 6.3 in
Width of Cut, to Router Bits 7.71 in
Ground Clearance - max 17.7 in
Depth of Spread - max 14.6 in


Transmission
Top Speed (Loaded) 21.8 mph
1 Forward 2.2 mph
2 Forward 3.6 mph
3 Forward 5.7 mph
4 Forward 8.9 mph
5 Forward 15.1 mph
6 Forward 21.8 mph
Reverse 2.17 mph


Weights
Total Operating - empty 33650 lb
Front Axle 21100 lb
Rear Axle 12550 lb
Total Operating - loaded 60050 lb
Front Axle Weight - loaded 29438 lb
Rear Axle Weight - loaded 30612 lb


Elevator
Length - overall 96 in
Width of Flight Face 6.9 in
Length of Flights 66.1 in
Spacing of Flights 16 in
Number of Flights 15


Dimensions
Height - Overall Shipping 122 in
Length - Overall Machine 399 in
Width - Overall Machine 96 in
Height - Top of Cab 122 in
Height - Scraper Blade Maximum 22.5 in
Width - rear tire center lines 70.9 in
Width - Outside Rear Tires 96 in
Front of Tractor to Front Axle 98.4 in
Wheelbase 246.5 in
Rear Axle to Rear of Machine 48.4 in


Service Refill Capacities
Fuel Tank 66 gal
Crankcase 5.3 gal
Transmission 9.2 gal
Differential 5 gal
Final Drive (each side) 1.5 gal
Cooling System 10.2 gal
Hydraulic Reservoir 26.4 gal


Hydraulics
Bowl Cylinder Bore 4 in
Bowl Cylinder Stroke 16.5 in
Ejector Cylinder Bore 3.5 in
Ejector Cylinder Stroke 36 in
Steering Circuit 21.93 gal/min
Scraper Circuit 26.95 gal/min


BENEFITS & FEATURES
Caterpillar 3116 Engine
Designed with fuel efficiency and emissions control in mind.


Unit Injection
Unit injection allows very high injection pressures and short injection times.

Fuel Passages
Internal fuel passages help eliminate the need for high pressure lines and their connections.

Two-piece, Articulated Piston
Two-piece, articulated piston maximizes the use of material properties.

High Top-ring position
The two-piece piston also features a high top-ring position to reduce "dead" space.

Serviceability
Block is designed for first overhaul without reboring.

Elevator Mechanism/Bowl
General earthmoving to finish work with work-alone capability.


Two-speed Elevator Drive
Two-speed elevator drive and high hydraulic horsepower provide maximum loading performance over a wide range of material conditions.

Elevator Flights
Elevator flights break up the material during the loading and unloading process which helps reduce fill area workload.

Retracting Floor
Retracting floor, bulldozer ejector and reversible elevator provide clean, quick material ejection.

Low-profile Bowl
Low-profile bowl design lets loaded material flow to the rear of the bowl.

Wide Cutting Edge
Wide cutting edge allows a large volume of material to enter the bowl.

Angled Ejector Top Plate
Angled top plate on ejector helps retain loads for maximum productivity and minimum haul road spillage.

Adjustable Throat Opening
Adjustable throat opening--lower elevator linkage may be adjusted from 25 to 400 mm/1 to 16 inches from the cutting edge.

Durability/Reliability
Roller mounted design of the retractable floor reduces the chance of binding.

Serviceability
Segmented elevator drive sprockets allow exchange without removing the chain.

Cutting Edges
Caterpillar cutting edges help you match the machine to job requirements.


Lower Cost
Reversibility extends the life which lowers your Ground Engaging Tool cost.

Long Life
Heat-treated and through hardened with minimum Rockwell surface hardness of 45 helps provide a long life before reversal is required.

Warranted
All scraper ground engaging tools are warranted against breakage.

Operator's Compartment
Logical, convenient control placement and exceptional operator comfort promote fast, confident machine operation for top productivity.


Excellent Viewing Area
Cutting Edge enhances finish work capability, while gauges easily monitor machine oeprating conditions.

Seat
The seat is multi-adjustable with air/hydraulic suspension for shift-long comfort.

Steering Wheel
Tilt/telescopic steering wheel enhances operational comfort and allows easier entrance and exit.

Variable-Flow Steering
Modulated, variable-flow steering for precise, low effort maneuverability.

Controls
Controls are easy to reach with low operational effort.

Sound
The operator exposure level is 75 dB(A) when equipped with optional cab.

Vibration
Resiliently mounted engine, cab/canopy, and transmission minimize vibration of the operator's compartment.

Tilt-out Windshield
Tilt-out windshield allows additional control of fresh air circulation.

Integral Rollover Protective Structure (ROPS)
Canopy is included in the standard arrangement, and the cab is optional.

Electronic Monitoring System
Three stages of alert notify the operator of varying degrees of required action to avoid possible damage or failure to components/systems.

Serviceability
Less time spent on maintenance gives you more time on the job.


Diagnostic Connector
Diagnostic connector (located in the cab) allows quick analysis of the starting and charging system with the aid of a service tool.

Wiring
With the increasing use of electronics in today's machines, the quality of materials and design are having a greater effect on machine availability.

Final Drives
Outboard, planetary final drives can be removed independently of wheel mounting and brakes.

Check Points
Quick connect/disconnect check points enable hydraulic pressures to be obtained quickly and easily.

Ground-Level Access
Ground-level access to majority of service points.

Maintenance Platform
Maintenance platform access--engine oil check and fill, engine coolant level check and fill, front brake reervoir, hydraulic system filter, secondary fuel filter.

Customer Support
Caterpillar dealer services help you operate longer with lower costs.


Parts
Caterpillar and its worldwide dealer network maintain the largest and most comprehensive parts support system in the industry.

Service
Whether in the dealer's fully equipped shop or in the field, trained service personnel will keep your equipment working.

Exchange Components
Exchange components--for quick, yet cost-effective repairs with minimal downtime.

Machine Management
Cat dealers help manage equipment investments.

Literature
Extensive operation and maintenance guides, parts manuals and other support information help you get the full value out of your equipment investment.

Financing/Leasing
Financing/leasing--through CAT Financial or an alternate source, your dealer can arrange attractive financing or leasing on the entire line of Cat equipment.


CONNECT. DISCUSS. SOLVE.
CATERPILLAR EQUIPMENT MAINTENANCE ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Cat 246
my cat 246 was running fine when we parked it . the next day turned the key on, had buzzer, glow plu...  [More]

CAT 307C 2004 Hydraulic Drawings
I've got an older colleague with a 307C 2004-model excavator. He came to me asking if it's possible...  [More]

Over Excitation Shutdown Problem For 3512 Diesel Generator
please give any advice to me.. i have using caterpillar 3512 generator from last 4 months in my...  [More]

Fuel Lines
I need help I have a D4D dozer 1974 year model and the s/n 82j3434 . I bought it ran great went back...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.