824H

The 824H Wheel Dozer was conceived and designed to surpass any competitor with exciting innovations that exceed customer expectations for performance, reliability and operator comfort.


SPECIFICATIONS
Engine
Engine Model Cat® C15 ACERT™
Net Power 354.0 hp
Flywheel Power 354.0 hp
Gross Power 401.0 hp
Direct Drive Net Power - Caterpillar 354.0 hp
Direct Drive Net Power - EEC 80/1269 354.0 hp
Direct Drive Net Power - ISO 9249 354.0 hp
Direct Drive Net Power - SAE J1349 (JAN90) 350.0 hp
Converter Drive Net Power - Caterpillar 354.0 hp
Converter Drive Net Power - EEC 80/1269 354.0 hp
Converter Drive Net Power - ISO 9249 354.0 hp
Converter Drive Net Power - SAE J1349 (JAN90) 350.0 hp
Net Power - SAE J1349 (JAN90) 350.01 hp
Bore 5.4 in
Stroke 6.7 in
Displacement 928.0 in3
Cylinders 6


Weights
Operating Weight 63325.0 lb


Blade Specifications
Blade Capacities 4.67 m3 - 16 m3 (6.1 yd3 - 21 yd3)
Straight Blade - Capacity 14.78 yd3
Straight Blade - Overall Width 1.4 ft
Straight Blade - Height 4.03 ft
Straight Blade - Digging Depth 1.4 ft
Straight Blade - Ground Clearance 3.51 ft
Straight Blade - Maximum Tilt 3.88 ft
Straight Blade - Weight 7047.0 lb
Straight Blade - Total Operating Weight 63325.0 lb
Universal Blade - Capacity 9.0 yd3
Universal Blade - Overall Width 14.23 ft
Universal Blade - Height 4.48 ft
Universal Blade - Digging Depth 1.7 ft
Universal Blade - Ground Clearance 3.14 ft
Universal Blade - Maximum Tilt 3.74 ft
Coal Blade - Capacity 20.93 yd3
Coal Blade - Overall Width 15.75 ft
Coal Blade - Height 5.92 ft
Coal Blade - Digging Depth 1.76 ft
Coal Blade - Ground Clearance 3.48 ft
Coal Blade - Maximum Tilt 4.11 ft
Semi-U Blade - Capacity 9.0 yd3
Semi-U Blade - Overall Width 14.56 ft
Semi-U Blade - Height 5.2 ft
Semi-U Blade - Digging Depth 1.78 ft
Semi-U Blade - Maximum Tilt 3.83 ft


Operating Specifications
Ground Clearance 14.09 in


Transmission
Number of Forward Speeds 4
Number of Reverse Speeds 4
Converter Drive - Forward 1 3.8 mph
Converter Drive - Forward 2 6.5 mph
Converter Drive - Forward 3 11.5 mph
Converter Drive - Forward 4 20.0 mph
Converter Drive - Reverse 1 4.3 mph
Converter Drive - Reverse 2 7.5 mph
Converter Drive - Reverse 3 13.0 mph
Converter Drive - Reverse 4 22.7 mph


Tires
Standard Tire Size 29.5RR25 XHA MX L3


Hydraulic System
Lift cylinder, bore and stroke 120.65 mm x 915 mm (4.75 in x 36.0 in)
Steering cylinder, bore and stroke 114.3 mm x 576 mm (4.5 in x 22.7 in)
Right tilt and tip, bore and stroke 152.4 mm x 255 mm (6 in x 10.0 in)
Left tilt and tip, bore and stroke 133.75 mm x 255 mm (5.3 in x 10.0 in)
Relief valve setting 3500.0 psi


Brakes
Brakes Meet SAE/ISO 3450 1996


Axles
Front Fixed
Rear Oscillating ±13°


Dimensions
Height to Top of Cab 12.14 ft
Height to Top of Exhaust Pipe 11.78 ft
Height to Top of Hood 8.64 ft
Ground Clearance to Bumper 2.9 ft
Height to Bottom of Ladder 1.46 ft
Center Line of Rear Axle to Edge of Bumper 8.82 ft
Center Line of Rear Axle to Hitch 6.07 ft
Wheelbase 12.14 ft
Length with Blade on Ground 26.98 ft
Ground Clearance 1.17 ft


Cab
Cab ROPS/FOPS is standard
Sound Performance Levels Meet ANSI/SAE, SAE and ISO standards
ROPS/FOPS Meets SAE and ISO standards


Service Refill Capacities
Fuel Tank - standard 185.0 gal
Cooling System 21.9 gal
Crankcase 9.0 gal
Transmission 16.4 gal
Hydraulic Tank 23.2 gal
Differentials and Final Drives - Front 23.8 gal
Differentials and Final Drives - Rear 23.8 gal


BENEFITS & FEATURES
Power Train
Delivers top performance and durability in tough applications.


Cat® C15 Engine with ACERT™ Technology
The Cat C15 engine is an increased displacement version of the proven Cat 3406 engine. The C15 is U.S. EPA Tier 3/EU Stage III compliant and features a 3.5 percent horsepower increase over the previous 3406. The four stroke engine delivers fuel economy, durability and reliability in the most demanding conditions. High torque rise delivers performance you can feel with greater rimpull, lift force and faster cycle times. Resilient engine mounts dampen vibration for lower sound levels.

Engine Lubrication
Engine lubricating oil is filtered, cooled and supplied by a gear-type pump.

Mechanical Electronic Unit Injector (MEUI™)
MEUI is a high-pressure, direct injection fuel system that is virtually adjustment-free. It electronically monitors operator and sensor inputs to optimize engine performance.

Air-to-Air Aftercooler (ATAAC) System
The ATAAC system provides a separate cooling for the intake manifold air. It routes hot, compressed air from the turbo and cools it with a single pass, air-to-air aluminum heat exchanger. The cooled, compressed air greatly reduces the emissions produced, meeting U.S. EPA Tier 3/EU Stage III requirements.
  • Airflow matched turbocharger with power rating helps reduce emissions.
  • 19 percent more bearing area allows the engine to operate at the maximum cylinder pressure.
  • Higher cylinder pressure capability helps reduce fuel consumption and improves high altitude operation and provides reduced emissions.
Cylinder heat exhaust port sleeves reduce heat rejection which results in less heat transfer into the water jacket system and provides high torque rise.

Next Generation Modular Radiator (NGMR)
The parallel flow system with six cores standard (seven on the high ambient machine) improves cooling capabilities. Serviceability is also enhanced as there is no top tank to remove. The NGMR uses copper brazed brass tubes and copper fins.

ADEM™ IV (Advanced Diesel Engine Management) System
ADEM IV uses a 32-bit computer with sensors throughout the engine to regulate fuel delivery, valve timing and all other engine systems that require input to manage load and performance. ADEM IV also offers automatic altitude compensation, a cold mode start-up strategy, oil pressure and coolant warnings which result in precise engine speed control, superior cold start capability, low smoke and emissions in all operating conditions.

Transmission
The extreme duty, planetary, powershift Cat transmission features heavy-duty components to handle the toughest jobs. The four planet drives operate in all gears forward and reverse. Electronic controls provide features to enhance productivity, durability and serviceability. The additions of the Electronic Clutch Pressure Control (ECPC) contributes to improved shift quality, reduced torque spikes and overall transmission durability. Control Throttle Shift (CTS) offers smoother shifts and improves clutch and power train life.

Torque Converter
The torque converter uses a high-capacity impeller to handle the engine's increased torque rise (24 percent) and power.

Heavy-Duty Axles
The fixed front and oscillating (±13 degrees) rear heavy-duty axles feature strong gears and bearings in both the differentials and heavy-duty final drives for increased durability. Permanently lubricated, maintenance-free U-joints result in fewer parts and improved serviceability. Free floating axles shafts can be removed independently from the wheels and planetary drives.

Spindles and Final Drives
Planetary units can be removed independently from the wheels and brakes. The final drives feature planetary reduction at each wheel, and with torque developed at the wheel, less stress is placed on the axle shafts.

Differentials
Conventional front and optional No-SPIN rear differentials deliver maximum traction in low traction or inconsistent ground conditions.

Service Brakes
Completely enclosed and located on the two front wheels, the service brakes are self-adjusting with modulated engagement and are designed for easy servicing. With two brake pedals, the right pedal controls standard braking while engine deceleration and braking occurs with the left pedal.

Parking Brake
The spring-applied, oil-released, dry drum design parking brake is mounted on the transmission output shaft driveline for manual operation. The Caterpillar Monitoring System alerts the operator if the transmission is engaged while the parking brake is applied.

Secondary Brake
The secondary brake can be applied manually by the operator. In addition, the Caterpillar Monitoring System alerts the operator if pressure drops and will automatically apply the parking brake.

Cold Start
This feature is improved by not only ADEM IV but also a new larger starter and four higher CCA batteries (1000 CCA).

Hydraulics
Well-balanced hydraulics deliver precise, low-effort control and trouble-free operation.


Hydraulic System
The hydraulic system provides low-effort blade control. Seat mounted levers send electrical signals to a pilot valve mounted on the front frame, moving the sound, heat and effort caused by the hydraulic valve out of the operator's station.

Command Control Steering
A mechanical feedback system combines with valve ratio to provide quarter-turn, side-to-side steering. Unlike systems that rely on steering wheel velocity to activate steering cylinders, Command Control steering directly links the steering wheel position to articulation. The speed the machine turns is proportional to the steering wheel position. The benefit is precise control, quicker response and dramatically reduced operator motion and effort.

Hydraulic Power Steering
Center-point frame articulation permits the front and rear wheels to track with hydraulic power steering. The hydraulic system has full-flow filtering. The steering wheel operated pilot valve controls flow to the steering cylinders. The steering angle is ±42 degrees.

Load Sensing Steering
With load sensing steering, machine performance is maximized because power is directed to the steering system only when the operator steers the machine. This allows more power to be applied to the ground when the machine is not being steered. It also helps decrease fuel consumption since the steering system does not constantly draw on the engine.

Positive Displacement Hydraulic Pumps
All hydraulic pumps are mounted on a single pump drive for improved serviceability

XT™-3 and XT™-6 Hose
Reliable XT-3 ES and XT-6 ES hoses, along with o-ring face seals and a large capacity life cylinder complete the hydraulic system. Reliable components reduce the risk of leaks and blown lines, helping protect the environment and reducing operating costs.

Automatic Blade Positioning
Operator automation is provided through the use of in-cylinder sensors and implement software.

Structures
Advanced design and materials provide superior strength to the purpose built structures.


Structures

Structure Construction
Combines the use of robotic welding on up to 90 percent of the 824H, while castings are used in several areas to increase strength by helping to spread the loads and reduce the number of parts. This provides highly consistent welds with deep plate penetration and excellent plate fusion. The benefits are increased durability and fatigue strength. The computer controlled machining ensures the alignment of pin bore, axle pad, cab mount and transmission/engine components.

Box Section Engine End Frame
Designed to resist twisting and torsional forces, the box section engine end frame provides a solid foundation for the axles, engine and transmission.

Dozer Front Frame
Built specifically to handle greater amounts of rimpull, the 824H can readily push its weight plus the weight of the material for long distances in heavy dozing applications.

Spread Hitch Design
The spread hitch design improves load distribution by reducing loads to the hitch bearings. The large center hitch design improves hydraulic line routing and makes service access easier.

Upper and Lower Hitch Pins
The hitch pins pivot on double-tapered roller bearings. Box-style sections in the hitch pins and crossmember assembly improve frame structure strength. Increased diameter lower hitch pins add to the robust design.

Engine and Transmission Mounts
A rubber isolation mount design reduces noise and vibration.

Blades
Multiple box-section construction with heat treated moldboard and DH-2 steel edges and end bits contribute to long life.


Blades

Operator Controls
Lift, tilt, tip and ABP are standard. The controls are conveniently located to the right of the operator.

Applications
The 824H excels at high production dozing and spreading fill, backfilling, stockpiling, charging hoppers, maintaining haul roads and cleaning up around job sites.

Blade Options
Contact your Cat® dealer for blade options and availability that include:

• Straight Blade
Straight blade is used for general work.

• Extended Wear Bulldozer Arrangement
The Extended Wear bulldozer arrangement is designed for moving large loads over long distances in harsh conditions. It consists of a 6.9 m3 (9 yd3) U-blade with Abrasion Resistant Material (ARM) on the front and sides, cutting edges, push arms and integrated cylinder guards, and a heavy-duty stabilizer.

• Coal Blade
The coal blade can increase coal capacity up to 50 percent per cycle over standard U-blades.

• Woodchip Universal Blade
The woodchip U-blade has a unique wing configuration that provides aggressive side setting into the chip pile, quickly knocking down stacked chips and loading the blade.

Universal Bulldozer Arrangement
6.9 m3 (9 yd3) Universal blade for moving large loads over a long distance while retaining control of the load.

Custom Options
Ask your Cat dealer about Cat Work Tool or Custom options.

Operator Station and Controls
Ergonomically designed for operator comfort with low-effort controls increases efficiency and productivity.


Operator Station and Controls

Right and Left Rear-Hinged Doors
A walk-through operator's station comes from right and left doors that can be fully opened and latched for easy entry and exit.

Sound Levels
A thick, non-metallic floor, along with outside the cab hydraulics and a separated cooling system contribute to a quiet work environment.

Viewing Area
The internal ROPS and bonded front glass eliminate the distracting metal frames to help increase the viewing area. The angled hood and larger windows allow the operator to see objects closer to the machine.

Cat® Comfort Series Seat
The six-way adjustable seat provides comfort by reducing the pressure on the lower back and thighs while offering unrestricted arm and leg movement. Air suspension adds to the overall comfort level by smoothing the ride over rough terrain.

Blade Control and Joystick
The pod is situated at an 18 degree angle for natural wrist positioning. The controller offers a sturdy handle for multiple hand positions. The actuation button for the blade tip function is located on the joystick, providing total blade control.

Storage Space
The cab features room for a lunch cooler, insulated bottle, cup and other personal items. A coathook is also provided.

Radio Ready
A 12-volt, 15-amp converter, speakers, antenna, all wiring and brackets for a communications or entertainment radio is provided.

Caterpillar Monitoring System
Gauges on the left side of the dash monitor fuel level, engine coolant, hydraulic oil and torque converter oil temperatures. The center panel contains the tachometer/speedometer. On the right side panel, a three-level warning system provides full-time monitoring of key functions. The system alerts the operator of immediate or impending problems with air inlet temperature, brake oil pressure, electrical system low voltage, engine oil pressure, engine overspeed, fuel filter status, parking brake status, steering oil pressure and transmission filter status.

12-Volt Power Supply
Radios, phones and laptop computers can be powered from the cab with the 12-volt, 15-amp power supply provided. A laptop computer can run Cat Electronic Technician (ET) software to access the enhanced engine, transmission and blade control system diagnostics.

Service Brakes
Standard braking is offered with the right pedal.

Decelerator Pedal
Engine deceleration for the first 50 percent of travel is followed by the brakes engaging. This left pedal enables the operator to slow down when the throttle lock is engaged and return to throttle lock without pressing a button.

Throttle Lock
Similar to cruise control in an automobile, throttle lock allows the operator to preset the engine speed for operator and machine efficiency.

Air Conditioning
Blended air provides immediate temperature changes, clears windows with ease and improves operator comfort. The system is located behind the operator's seat and uses R134a refrigerant.

Ventilation Ducts and Vents
More airflow is directed to the operator and windows, while post-mounted vents direct air to the rear windows.

Automatic Blade Positioning (ABP)
This patented system is intended to lower fatigue, increase comfort and make operators more productive. It mimics manual functions by automatically lowering the blade when the machine is shifted forward and raising it in reverse. The set points to where the blade raises and lowers can be easily changed from inside the cab. Additionally, a kick-out feature of the system will allow the operator to raise/lower the blade without having to hold the joystick in place. The operator always maintains full control of the blade during this cycle with the ability to override ABP.

Serviceability
Having easy daily maintenance is the way to get it done.


Serviceability

Caterpillar Monitoring System
Diagnostics are provided that allow technicians to review a machine's operation and quickly troubleshoot problems. Operating parameters, diagnostic codes and out-of-range gauge readings are displayed through the diagnostic connector. There are also pressure taps for easy hydraulic system checks.

Service Access
Scheduled maintenance points are well within reach. A remote grease fitting is provided to lubricate the lift cylinder yoke. Removable tread plates in the platform give access to less commonly serviced components. With the 824H, the transmission (ECPC) pressure taps are now located behind the cab, under the platform door for easy access.

Daily Maintenance
Lockable ground level service doors give quick access to engine oil fill and dipstick, coolant sight gauge, rear frame grease fittings, relay panel and electrical breakers. All four maintenance-free batteries are secure in a built-in battery box located in the right rear frame. U-joints are lifetime lubricated, leaving the slip joint as the only driveline component needing grease.

Filter Access
The left platform offers access to the primary filter, while the engine oil filter is accessed from the right platform.

Air Filter Restriction Sight Gauge
This can be viewed from the cab or platform.

Transmission Oil Fill Tube
The tube is located beneath the platform area and the transmission oil dipstick sight gauge is located next to the fill tube for easy maintenance.

500 Hour Oil Change Interval
Uptime and production are increased by doubling the time between oil and filter changes without requiring increased oil sump capacity.

Separated Cooling System
The fan and radiator are isolated away from the engine for a quieter running machine. NGMR reduces radiator repair time. The new metal engine enclosure is completely redesigned for greater durability and to provide easy access for daily maintenance and inspection.

Hinged Hydraulic Oil Cooler
This can be swung open 30 degrees without special tools.

Hinged Air Conditioning Condenser
This swings open 30 degrees and coupled with the swing-out oil cooler, allows the cooling system to be cleaned quickly and easily.

Operator Station
In about 45 minutes, the operator station can be removed or replaced without having to disconnect hydraulic lines. Quick disconnect couplings allow fast disconnect of the air conditioning unit without releasing refrigerant.

Engine Shutdown Switch
This switch is located inside the left radiator screen door for simple access and extended switch life.

Bolt-on Bumper
The angle of departure is improved from 18 degrees to 20 degrees by shortening the overall machine length.

Battery Box
Maintenance-free batteries are located in the battery box located in the right side bumper for convenient access.

Tool Box
The tool box is located in the left side bumper to provide additional protection against harsh work environments.

Optional Features
Available options can augment the 824H and meet your needs.


Full Coverage Fenders
The front fenders extend beyond the outermost surface of the machine to prevent mud from splattering the front and side windows and to keep rocks from flying into window glass. The optional full coverage fender package includes front fenders with mud flaps. Full coverage rear fenders extend to the bumper, along with a rear rubber (lateral) fender extension to ensure the entire tire width is covered.

Optional Counterweight
This feature is located on either side of the front frame. For each specific application, there is a correct machine weight for proper balancing of traction, flotation, mobility and response. Lower machine weight is usually required for typical second gear applications such as fill spreading, stockpiling, road maintenance, towing implements and shovel cleanup. Higher machine weight is usually required for such typical first gear applications as heavy dozing and pushloading.

Optional Sliding Cab Window
Located in the right and left doors are optional sliding windows to provide access to outside air without opening the door.

Floodlights
Located on the 824H exterior, floodlights are super damp and will last up to seven times longer than previous lights. An auxiliary light package with the cab (two facing forward and two facing rearward) is available.

Fast Fuel Fill
High speed fueling allows your 824H to stay in production longer.

Cat® Product Link (Attachment)
Product Link allows tracking of machine location and service hours through global positioning technology (GPS) and provides all logged diagnostic codes. This feature is available to dealers in North America and certain licensed countries. To verify if a license exists for your location, please contact your Cat dealer.

Complete Customer Support
Caterpillar® dealers are there to help you keep your machines up and running for maximum productivity.


Complete Customer Support

Machine Selection
Make detailed comparisons of the machines under consideration before purchasing. Cat dealers can estimate component life, preventive maintenance cost and the true cost of lost production.

Purchase
Look past initial price. Consider the financing options available as well as day-to-day operating costs. Look at dealer services that can be included in the cost of the machine to yield lower equipment owning and operating costs over the long run.

Customer Support Agreements
Cat dealers offer a variety of product support agreements and work with their customers to develop a plan that best meets specific needs. These plans can cover the entire machine, including attachments, to help protect the customer's investment.

Product Support
You will find nearly all parts at our dealer parts counter. Cat dealers use a worldwide computer network to find in-stock parts to minimize downtime. Save money with genuine Cat® Reman parts. You receive the same warranty and reliability as new products at cost savings of 40 to 70 percent.

Operation
Improving operating techniques can boost your profits. Your Cat dealer has training video tapes, literature, application and equipment training courses and other ideas to help you increase productivity.

Maintenance Services
More equipment buyers are planning for effective maintenance before buying equipment. Choose from your Cat dealer's wide range of maintenance services at the time you purchase your machine. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as S·O·SSM and Coolant Sampling and Technical Analysis help you avoid unscheduled repairs.

Replacement
Repair, rebuild or replace? Your Cat dealer can help you evaluate the cost involved so you can make the right choice.

EQUIPMENT
Standard Equipment

ELECTRICAL
  • Alarm, back-up
  • Alternator (95-amp)
  • Batteries, maintenance-free (four 1,000 CCA)
  • Diagnostic connector
  • Electrical system (24-volt)
  • Lighting system, halogen (front and rear)
  • Lockable master disconnect switch
  • Starter, electric (heavy-duty)
  • Starting receptacle for emergency starts
OPERATOR ENVIRONMENT
  • Air conditioner
  • Cab, pressurized and sound suppressed
  • Cigar lighter (12-volt, 15-amp) and ashtray
  • Coat hook
  • Command Control steering
  • Electro-Hydraulic tilt, tip and Automatic Blade Positioning (ABP) controls
  • Fingertip shift controls (steering wheel mounted)
  • Gear selection display
  • Heater and defroster
  • Horn, electric
  • Action alert system, three category
  • Instrumentation, warning indicators
  • Light, cab (dome)
  • Lunchbox and beverage holders
  • Mirrors, rearview (externally mounted)
  • Seat, Comfort Series (cloth), air suspension
  • Seat belt, retractable, 76 mm (3 in) wide
  • Tilt and lift control system lock
  • Transmission gear indicator
  • Wet-arm wipers/washers (front and rear)
POWER TRAIN
  • Brakes, full hydraulic, enclosed, wet-disc
  • Cat axles, outboard final drives
  • Demand fan, hydraulic
  • Electronic fuel priming pump
  • Engine, Cat C15 MEUI with ACERT™ Technology, ATAAC, ADEM™ IV controller
  • Muffler, sound-suppressed
  • Precleaner, engine air intake
  • Radiator, Next Generation Modular Radiator (NGMR)
  • Separated cooling system
  • Starting aid (ether)
  • Throttle lock
  • Switch, transmission neutralizer lockout
  • Torque converter
  • Transmission, planetary, autoshift (4F/4R)
OTHER STANDARD EQUIPMENT
  • Auto Blade Positioner (ABP)
  • Caterpillar o-ring face seals couplings and XT™ hoses
  • Coolers
  • Doors, service access (locking)
  • Engine, crankcase, 500 hour interval with CH-4 oil
  • Grouped Electronic Clutch Pressure Control, remote mounted pressure taps
  • Hitch, drawbar with pin
  • Hood, metallic with lockable service doors
  • Muffler (under hood)
  • Oil sampling valves
  • Vandalism protection caplocks
  • Venturi stack
BULLDOZERS
  • Bulldozer is not included in standard equipment
TIRES, RIMS AND WHEELS
  • A tire must be selected from the mandatory attachments section - base machine price includes a tire allowance
ANTIFREEZE
  • Premixed 50 percent concentration of Extended Life Coolant with freeze protection to -34° C (-29° F)

Optional Equipment

Counterweight - 2227 kg/4,910 lb
Electrical
  • Lights, cab auxiliary - 3 kg/7 lb
  • Lights, directional signal - 2 kg/4 lb
Fast Fuel adapter - 4 kg/9 lb
Fenders, front and rear roading - 604 kg/1,333 lb
Guards, Drive Shaft
  • Use with counterweight - 20 kg/44 lb
  • Use without counterweight - 58 kg/127 lb
Operator Environment
  • Mirror, internal (panoramic) - 5 kg/10 lb
  • Mirror, internal (rearview) - 3 kg/7 lb
  • Radio, AM/FM, weatherband, cassette 2 kg/4 lb
  • Sliding cab window - 13 kg/28 lb
  • Visor, front - 5 kg/10 lb
  • Wiper, intermittent (rear) - 1 kg/2 lb
Power Train
  • Differential, No-SPIN rear - 2 kg/4 lb
  • Cooler, axle oil - 183 kg/403 lb
Starting Aids
  • Heater, engine coolant - 2 kg/4 lb
  • Heater, 220-volt - 1 kg/3 lb
Miscellaneous Attachments
  • Oil change, high speed - 1 kg/3 lb
  • Precleaner, turbine/trash - 14 kg/30 lb
  • Product Link -
  • Secondary steering - 37 kg/72 lb
  • Sound suppression - 103 kg/227 lb
  • Special application end bits - 15 kg/32 lb
  • Computer Aided Earthmoving System (CAES) ready
Antifreeze -

CONNECT. DISCUSS. SOLVE.
CATERPILLAR EQUIPMENT MAINTENANCE ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Cat C7 Serpentine Belt Diagram
Have a freightliner with a Caterpillar C7 engine. Cannot find the belt diagram on the truck&nbs...  [More]

242D Engine Mounts
I need to replaced the engine mount bushings on my 242D but the bolts hit the fuel tank.I there a se...  [More]

Engine Shutdown Due To High Crankcase Pressure
How can i verify that theres actually a high pressure in crankcase? Before shutdown, MPD also diplay...  [More]

963 Ac Vaccum On Low Side
Long story short blew the low side hose going into the compressor two weeks ago replaced hose and en...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.