TH360B

Caterpillar Telehandlers offer performance and versatility.


SPECIFICATIONS
Operating Specifications
Rated Load Capacity 7000 lb
Maximum Lift Height 44.3 ft
Load at Max Height - No Stabilizers 3000 lb
Load at Max Height - Stabilizers Down 7000 lb
Load at Max Height - Stabilizers Up 3000 lb
Maximum Forward Reach 30.2 ft
Load at Max Reach - No Stabilizers 1250 lb
Load at Max Reach - Stabilizers Down 3000 lb
Load at Max Reach - Stabilizers Up 1150 lb
Top Travel Speed 25 mph


Engine
Engine Model Cat® 3054E
Gross Power 99 hp
Net Power 94.9 hp
Maximum Torque 303 lb ft
Bore 4 in
Stroke 5 in
Displacement 268 in3


Weights
Operating Weight 20800 lb


Dimensions
Height 8 ft
Width 7.9 ft
Wheelbase 10.5 ft
Length to Fork Face 21.3 ft
Ground Clearance 20 in
Turning Radius Over Tires 12.5 ft
Turning Radius Over Forks 17.9 ft
Length to Front of Tire 16.44 ft
Rear Overhang 3.84 ft
Height to Top of Hood 6.4 ft


Hydraulic System
Maximum System Pressure 3625 psi
Maximum Pump Flow 28 gal/min
Auxiliary Hydraulic Supply 16 gal/min
Pump Type Variable Displacement Load Sensing Axial Piston Pump


Service Refill Capacities
Fuel Tank 29 gal
Hydraulic Tank 17.2 gal


Transmission Speeds
Forward - 1 4 mph
Forward - 2 7 mph
Forward - 3 13 mph
Forward - 4 25 mph
Reverse - 1 4 mph
Reverse - 2 7 mph
Reverse - 3 13 mph


Boom Performance
Boom Up 16 Seconds
Boom Down 8 Seconds
Tele In 12 Seconds
Tele Out 16 Seconds
Crowd Forward (dump) 3 Seconds
Crowd Backward 3 Seconds
Combined - Up and Out 33 Seconds
Combined - Down and In 17 Seconds
Boom Breakout Force 1126292.59 lb


Brakes
Foot Brake Servo assisted service brake
Parking Brake Dry disc on front axle


BENEFITS & FEATURES
Operator Station
The operator station provides comfort and protection with excellent job site visibility and convenient, logical controls.


Operator Station

Intuitive Control Layout
All day operator comfort and efficiency is ensured through our simple, logical control layout.

Easy Access
Cab entry and exit is both easy and convenient due to the well placed handholds and step.

Operator Protection
The machine provides full operator security with ROPS/FOPS protection.

Seat
A variety of seats are available, tailored to meet the requirements of the operator and applications.

Electronic Machine Information Display
Communicates essential technical data to facilitate easier machine operation.

Excellent Visibility
The B-Series cab has superb visibility due to the use of advanced virtual design techniques.

Joystick
The joystick is capable of three simultaneous boom functions making machine operation easy. All functions are fully modulated.

Ease of Operation
Ease of operation was paramount in the design of the new TH360B. The single joystick, with its intuitive, modulated, hydraulic functions, and the new Cat electronic machine information display are designed to maximize operator efficiency.


Ease of Operation

Joystick Control
The joystick allows three simultaneous boom functions and incorporates unique slider switches. The joystick also operates the auxiliary hydraulic function and allows the option of a second auxiliary service for the use of work tools that require more than one hydraulic service.

Hydraulic System
The Cat Electro Hydraulic system allows all three boom functions to be operated simultaneously and proportionally. This enables precise placing of loads in challenging applications. Auxiliary hydraulic functions are available on the joystick to allow operators to utilize more complex work tools. A continuous flow auxiliary hydraulic supply is also available for operating tools such as brooms that require continuous flow for long periods of time.

Integrated System
The Caterpillar exclusive integrated management system allows the engine, transmission and hydraulic systems to operate with maximum efficiency, control and productivity.

Flow Sharing
Three simultaneous hydraulic functions are achieved using a full flow sharing hydraulic valve. A load sensing variable displacement pump allows full hydraulic power even at low revs.

Performance
The TH360B delivers high performance to meet your specific job site needs.


Performance

Lift Height
The TH360B can effectively and quickly place bricks, roofing materials and trusses to a maximum height of 13.5 m (44 ft).

Reach
Job site obstacles present challenges demanding a machine to place loads at greater distances - the TH360B delivers.

Maneuverability
The TH360B offers excellent maneuverability, due to its tight turning circle and its three different steering modes. The TH360B has 48 degree axle steering angle and no rear tail swing, allowing it to work productively and safely in confined areas.

Steering Modes
The TH360B offers three steering modes (two wheel, crab and circle steer) to allow an operator to easily position the machine. Steering modes are selected by a single three-position rocker switch. Steering position sensors are fitted as standard to all steering modes to be changed while moving.

Frame LevelStabilizers
Power Train
Caterpillar engines, axles and transmissions give you the quality power train that you expect.


Power Train

High Torque Rise Engine
The Cat 3054E Electronic engine is U.S. EPA Tier 2 compliant. While continuing to deliver maximum performance it features improved timing, reduced smoke and exceptional service improvements. For improved sound characteristics, a venturi tailpipe has been packaged inside the engine enclosure. The cooling system has been designed to work in the most challenging conditions. Electronic engines deliver:
  • Improved low idle performance
  • Improved fuel consumption
  • Improved cold start
  • Increased diagnostic and security capability

Transmission
The TH360B has a purpose designed Caterpillar four speed forward, three speed reverse powersyncro transmission.

Axles
The TH360B is fitted with Caterpillar planetary reduction axles. For improved machine performance in difficult conditions, a differential lock is available (front axle).

TH360B Axle Loadings
Versatility
Redefine the traditional role of a Telehandler with the Cat TH360B.


Versatility

Quick Coupler
An IT interface is standard on the B-Series. It is available in both a manual and a hydraulic version. For optimum versatility, machines can be equipped with the hydraulic quick coupler, allowing the operator to quickly and easily change non-hydraulic work tools without leaving the cab.

Hydraulic Services
Machines are equipped with Auxiliary Hydraulic services, allowing the use of hydraulically operated work tools. All B-Series Telehandlers are equipped with a single auxiliary hydraulic service and continuous hydraulic flow.

Work Tools
A wide range of work tools are available to meet most job site applications. Caterpillar Telehandler Work Tools extend the versatility of the machine. Built for performance and durability, these work tools deliver high productivity, long life and excellent value. General Purpose Bucket (1.0 m3/1.3 yd3) Material Handling Bucket (1.5 m3/1.95 yd3) Multi Purpose Bucket (1.0 m3/1.3 yd3) Grapple Bucket (0.85 m3/1.1 yd3) Fixed Carriage Rotate Carriage Sideshift Carriage Wide Carriage Wide Rotate Carriage Swing Carriage Access Platform Pallet Forks Block Forks Lift Hook Truss Boom Self-tipping Hopper Material Handling Arm Contact your Cat dealer for additional work tool options.

Tow Hitches
A manual rear tow hitch is available for off-highway towing as an option.

Machine ConfigurationsTires
Cost of Ownership
Specifically designed to lower your owning and operating costs.


Cost of Ownership

Ease of Access
Cost of ownership starts with ease of service. All Cat Telehandler service points are readily accessible and major components are easy to reach at ground level due to overall machine design.

Daily Maintenance
Routine daily maintenance is now reduced to checking fluid levels and a walkaround inspection.

Service Intervals
Engine oil, filter changes and routine lubrication are now only required every 500 hours.

Reduced Componentry
The combined hydraulic/transmission oil filter requires changing at 1,000 hours. With the reduction in the number of filters and extended service intervals, operating costs are the lowest in the industry.

Machine Security System
Secure your investment with the Caterpillar Machine Security System (MSS), a programmable key system that provides optimum machine security for both fleet users and single owners. · MSS disables machine by interacting with the machine's Electronic Control Modules (ECM) · Keys fit all existing Cat machines (including machines without MSS) · Each machine can store up to 50 key identifications · Each key can be configured to operate a certain range of machines or enable operation for a certain period of time

Serviceability and Customer Support
Caterpillar Dealer Services enables you to operate longer with lower costs, helped by significantly extended service intervals.


Serviceability and Customer Support

Access
All Cat Telehandler service points, including the combined transmission/hydraulic oil filter, are readily accessible and major components are easy to reach at ground level due to the overall machine design. A cab mounted service point allows access to the fuel fill, hydraulic oil fill, washer bottle, fuse box and cab air filter for routine checks.

Selection
Make detailed comparisons before you buy. Your Cat Dealer can give you precise answers to your questions.

Purchase
Look at the value that the TH360B Telehandler will offer you. Consider all the flexible financing options your Cat Dealer offers as well as day to day operating costs.

Operation
Improving operating techniques can boost your profits. Your Cat Dealer has training literature and other ideas to help increase your productivity.

Maintenance
Repair options guarantee the cost of repairs up front. Diagnostic programs such as Scheduled Oil Sampling and Technical Analysis help you avoid unscheduled repairs.

Replacement
Repair, rebuild or replace? Your Cat Dealer can help you evaluate the cost involved so you can make the right choice.

Product Support
You will find high availability of parts at our Dealer parts counter. Cat Dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. Additionally, Caterpillar offers a line of genuine remanufactured components which can help lower repair costs.

Easy Financing
Your Cat Dealer can provide a financing package to meet your needs.

EQUIPMENT
Standard Equipment

TELESCOPIC BOOM
  • Wear pads, non-metallic
  • Lock valve on hydraulic cylinders
  • Boom angle indicator
  • Single auxiliary to the boom head
ELECTRICAL
  • Alternator, 90-amp
  • Anti-restart key switch
  • Battery, maintenance-free, 12 volt, 750 CCA with disconnect
  • Horn
  • Alarm, backup
  • Electronic Control Module
  • Power sockets, 12 volt internal and external
  • Caterpillar Electronic Technician diagnostic connection
OPERATOR STATION
  • Canopy, ROPS/FOPS
  • Joystick, electronic
  • Adjustable joystick wristrest
  • Low step, grab bars for easy entry
  • 2-way adjustable vinyl suspension seat, seat belt, document pouch
  • Steering wheel spinner knob
  • Floor mat
  • Right and left side rear view mirror
  • Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
  • Instrument cluster with power train and system monitor, longitudinal stability indicator, steering alignment indicator, fuel gauge, engine oil temperature gauge, engine water temperature gauge, hydraulic transmission temperature, SMU and air filter blockage indicator
  • 2-piece entry door
  • Cup holder
  • Fixed steering column
  • Boom lights
POWER TRAIN
  • Engine, Cat 3054E (U.S. EPA Tier 2 compliant)
  • Self aligned steering
  • Air cleaner, dual element and filter condition indicator
  • Thermal starting aid
  • Water separator
  • Transmission, Caterpillar 4 forward/3 reverse Powersyncro
  • Direction change, single lever, column mounted
  • Spin-on filters: engine oil filter, hydraulic/transmission filter
  • Axles, Caterpillar; planetary drive, full time mechanical 4-wheel drive, integrated steer cylinders protected above axles, with steer sensors
  • Steering, power assisted, enclosed oil disc brakes, front axle
  • Parking brake, dry disc with transmission disconnect
STRUCTURE
  • Chassis, frame level
  • Mechanical quick coupler
ANTI-FREEZE
  • Anti-freeze, extended life -36°C (-34°F)
TIRES
  • Cat brand 13.00-24
OTHER EQUIPMENT
  • Integrated lift and tie down points
  • Padlock on power module
  • Retrieval point
  • Standard Cat color paint
  • Continuous flow hydraulics

Optional Equipment

TELESCOPIC BOOM
  • Hydraulic quick coupler
ELECTRICAL
  • Light packages: boom lights, roading lights, cab lights
  • Alternator, 105 amps
  • Dual battery
  • Engine heater block, 120V/750 Watts
OPERATOR STATION
  • Enclosed cab
  • Air conditioning
  • Heater
  • Seats: cloth suspension, cloth air-suspension
  • Headliner
  • Sun visor
  • Screen guard
  • Additional mirror packages
  • Rear wash/wipe
  • Machine Security System (MSS)
  • Beacon, magnetic mount
  • Adjustable steering column
  • Radio ready
  • Adjustable joystick armrest
POWER TRAIN
  • Differential lock
STRUCTURE
  • Stabilizers
ANTI-FREEZE
  • Anti-freeze, extended life -50°C (-58°F)
TIRES
  • 13.0-24 Cat
  • 13.00-24 SGG Goodyear
  • 13-24 Cat foam filled
  • 13-24 Cat (Arnco ReSeal)
  • 15.5-25 Cat
  • 15.5-25 Cat foam filled
  • 15.5-25 Cat (Arnco ReSeal)
  • 15.5R25 XHA Michelin
OTHER EQUIPMENT
  • Fenders
  • Lockable storage drawer
  • Steering cylinder lock
WORK TOOLS
  • Access platform
  • Carriage: standard, rotate, wide frame, wide frame (rotate), side-shift, swing
  • Forks: Pallet forks 50 x 100 x 1220 mm (2 in x 4 in x 48 in) Block forks 51 x 51 x 1219 mm (2 in x 2 in x 48 in) Pallet forks 51 x 102 x 1524 mm (2 in x 4 in x 60 in)
  • Buckets: General Purpose 1.0 m3 (1.3 yd3) Material Handling 1.5 m3 (1.95 yd3) Multi Purpose 1.0 m3 (1.3 yd3) Grapple 0.85 m3 (1.1 yd3)
  • Material Handling Arm
  • Self-tipping Hopper, 1.2 m3 (1.56 yd3)
  • Lifting Hook
  • Truss Boom
OTHER ATTACHMENTS
  • Hitch, manual rear-tow

CONNECT. DISCUSS. SOLVE.
CATERPILLAR EQUIPMENT MAINTENANCE ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Cat C7 Serpentine Belt Diagram
Have a freightliner with a Caterpillar C7 engine. Cannot find the belt diagram on the truck&nbs...  [More]

242D Engine Mounts
I need to replaced the engine mount bushings on my 242D but the bolts hit the fuel tank.I there a se...  [More]

Engine Shutdown Due To High Crankcase Pressure
How can i verify that theres actually a high pressure in crankcase? Before shutdown, MPD also diplay...  [More]

963 Ac Vaccum On Low Side
Long story short blew the low side hose going into the compressor two weeks ago replaced hose and en...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.