330D MH WH

The 330D MH Waste Handler incorporates many design features specifically for transfer station applications that will improve uptime and productivity.


SPECIFICATIONS
Engine
Engine Model Cat® C9 ACERT™
Net Flywheel Power 268.0 hp
Net Power - ISO 9249 268.0 hp
Net Power - SAE J1349 266.0 hp
Net Power - EEC 80/1269 268.0 hp
Bore 4.4 in
Stroke 5.87 in
Displacement 537.0 in3


Weights
Operating Weight 83980.0 lb
Upper 30529.0 lb
Counterweight 16600.0 lb
Undercarriage (includes carbody) 27948.0 lb
Two-Piece Front (with cylinders) 8905.0 lb
Stick 3085.0 lb
Boom 5820.0 lb


Operating Specifications
Max. Reach 31.0 ft


Performance
Max. Drawbar Pull 67443.0 lb


Service Refill Capacities
Fuel Tank 163.8 gal
Fuel Tank 163.8 gal
Cooling System 10.6 gal
Engine Oil 10.6 gal
Swing Drive 5.0 gal
Final Drive (each) 2.1 gal
Hydraulic System (including tank) 108.3 gal
Hydraulic Tank 46.2 gal


Hydraulic System
Maximum Flow (each of two pumps) 74.0 gal/min
Max. Pressure Implements 5076.0 psi
Max. Pressure Travel 5076.0 psi
Max. Pressure - Swing 4061.0 psi
Pilot System Max. Flow 11.4 gal/min
Pilot System Max. Pressure 565.7 psi


Drive
Maximum Drawbar Pull 67443.0 lb
Maximum Travel Speed 3.1 mph


Dimensions
Operating Width 14.4 ft
Shipping Length 36.75 ft
Tail Swing Radius 11.48 ft
Ground Clearance 1.5 ft


Swing Mechanism
Swing Torque 80142.0 lb ft
Swing Speed 10.0 RPM


Track
Track Shoes 32.0 in
Gauge 8.5 in
Shoes (each side) 49
Rollers (each side) 9


BENEFITS & FEATURES
Front Linkage
The 330D MH Waste Handler front linkage is designed to provide the excellent reach and durability necessary to meet the requirements of transfer station and demolition applications.


Front Linkage

Heavy-Duty Boom and Stick
The heavy duty reach boom and heavy duty 10.5 ft stick are more robust than the standard reach boom and stick. The "heavy-duty" features include thicker plates throughout the design to handle the increased loading experienced in transfer station applications.

The front linkage has a maximum horizontal reach of 9.4 m (31 ft) and maximum vertical pin height of 8.8 m (29 ft). Thus, the working range of the machine provides an excellent match for loading hauling units from a platform or from level ground.

Welded Box-Section Structures
The boom and stick are designed and built for maximum durability and performance. Efficient design of welded box-section structures with thick, multi-plate fabrications and internal baffle plates in high stress areas maximizes strength and durability required for the loading conditions of transfer stations and demolition applications.

Stress Relieved Boom and Stick
The boom and stick are stress relieved to maximize the strength of the weld joints. The process of stress relieving also allows for the structure weight to be minimized, allowing heavier payload capacity.

Waste Handler Structures
The 330D MH Waste Handler has many structural components that add strength to the machine to improve it's durability.


Waste Handler Structures

Heavy-Duty Upper Frame
Upper box-section reinforcement on the upeer frame provide additional strength for improved durability.

Horizontal mounting plate provides more surface area for swing drive and swing bearing mounting bolts to handle increased loading.

The heavy-duty upper frame has many specifically designed features for added strength and improved durability in waste handling applications. It is composed of higher strength material and thicker steel sections to handle the increased loading activity seen in waste transfer stations and demolition applications.

Boom tower double plates add thick steel reinforcements to handle the greater stresses caused by increased loading.

Box-section cylinder mounts allow for improved resistance against increased torsional loads and payloads.

Waste Handler Guarding
The 330D MH Waste Handler is equipped with special guarding, designed specifically for the challenges faced in waste handling and demolition applications.


Waste Handler Guarding

Rubber Bumpers
The rubber bumpers provide much needed guarding to protect the sheet metal of the machine from being damaged while maneuvering in tight areas.

Swivel Guard
The swivel guard, designed specifically for waste applications, protects the swivel from the wrapping of debris. This will allow more uptime through the decrease in maintenance associated with removing video tape and wire from the swivel.

Swing Bearing Guard
The swing bearing guard is a bolt on guard that protects the swing bearing from any damage by shielding it from any potential sources of wrapping such as video tapes and wire. It also prevents packing of debris around the swing bearing.

Falling Object Guards
The optional falling object guard protects the cab and front windshield from debris in transfer stations.

Waste Handling Features
The waste handler has been designed with many benefit adding features to enhance its performance in waste applications.


Trash Resistant Cooling System
A Trash Resistant Cooling arrangement reduces cooling system maintenance and downtime when operating in environments with large amounts of airborne debris such as feeding shredders in scrap applications, waste transfer stations, demolition and forestry applications. This package will also help avoid costly engine and hydraulic repairs and downtime resulting from overheating caused by a plugged cooling system. This arrangement is standard on the 330D MH Waste Handler.

Trash Resistant Cooling Features
  • Debris Filters - These stainless steel mesh filters trap debris before it enters the house, keeping it out of the radiator and oil cooler. These filters can be easily removed and cleaned. A second set of filters minimizes downtime, allowing the operator to keep working while the first set is cleaned.
  • Hydraulic Automatic Reversing Fan on the oil cooler.

Cooling System
The cooling fan is hydraulically driven and controlled by the ECM. The optimum fan speed is calculated based on the ambient temperature, coolant temperature and hydraulic oil temperature. This unique feature assists in the management of engine power and improves noise efficiency. The C9 delivered a completely new layout that separates the cooling system from the compartment. The auto reversing fan is controlled by the ECM and is adjustable.

Heavier Counterweight
The 330D MH Waste Handler has been outfitted with a counterweight that is 25% heavier than a standard 330D L counterweight for better stability while handling waste or demolition debris.

Cab Riser
The standard 2.6 m (8.5 ft) cab riser provides for elevated operating height to improve visibility while loading waste into a hauling unit and allows the operator to see over obstructions in the transfer station.

Turbine Precleaner
The standard turbine precleaner helps keep debris away from the cooling system by removing debris from the air intake. The 330C MH Waste Handler is also equipped with the SyKlone Optimax dual stage engine precleaner which purges remaining debris from intake air, providing longer air filter and engine life.

SyKlone Gideon Cab Air Precleaner
This cab air precleaner extends cab air filter life, increases operator comfort by effectively eliminating dust and odor, and keeps evaporator and heater coils clean.

Cab Mounted Beacon
The cab mounted beacon flashes whenever the master disconnect is on.

In-cab Master Disconnect
An additional master disconnect switch is provided in the cab for easier operator access.

Engine and Hydraulics
Caterpillar designed engine and hydraulics work together to give the 330D MH Waste Handler an exceptional combination of speed and power required in waste and demolition applications.


Engine and Hydraulics

Engine
Six-cylinder, turbocharged engine built for power, reliability, and economy will allow the machine to consistently perform at high levels. The CAT® C9 engine is designed for low emissions and will meet EPA Tier 3 emissions requirements.

Performance
The 330D MH, equipped with the C9 engine with ACERT™ Technology, provides 9% more horsepower as compared to the C9 in the 330C MH.

Electronic Control Module
The Electronic Control Module (ECM) works as the 'brain' of the engine's control system, responding quickly to operating variables to maximize engine efficiency. Fully integrated with sensors in the engine's fuel, air, coolant and exhaust systems, the ECM stores and relays information on conditions such as RPM, fuel consumption and diagnostic information.

Automatic Engine Speed Control
The two-stage, one-touch control maximizes fuel efficiency and reduces sound levels.

ADEM™ A4 Engine Controller
The ADEM™ A4 electronic control module manages fuel delivery to get the best performance per liter of fuel used. The engine management system provides flexible fuel mapping, allowing the engine to respond quickly to varying application needs. It tracks engine and machine conditions while keeping the engine operating at peak efficiency.

Hydraulic Cross Sensing System
Improves productivity with faster implement speed and quick, strong pivot turns.

Fine Swing Control
Fine swing control cushions swing start and stop for better implement control.

Hydraulic Cylinder Snubbers
The hydraulic cylinder snubbers at the rod-end of the boom cylinders and both ends of the stick cylinders cushion shock to improve cylinder life.

Controllability
The hydraulic system offers very precise operator control to reduce fatigue and improve operator efficiency translating into enhanced machine performance and productivity.

Boom and Stick Regeneration Circuit
Boom and stick regeneration circuit increases efficiency and reduces cycle time for higher productivity and lower operating costs.

Work Tools
Mechanical and hydraulic work tools are offered by Caterpillar to maximize machine performance in waste and demolition applications.


Work Tools

Trash Grapple
The Cat Work Tools trash grapple has been designed to meet the requirements of waste handling. Powered by the bucket cylinder, the trash grapple mechanically works to compact trash while placing it into the bed of the hauling unit. This helps to maximize the amount of waste that can be placed into one unit, maximizing efficiency.

Complete Customer Support
Cat® Dealer services help you operate longer with lower costs.


Complete Customer Support

Product Support
You will find nearly all parts at our dealer parts counter. Cat® dealers utilize a worldwide computer network to find in-stock parts to minimize machine down time. Save money with remanufactured components.

Machine Selection
Make detailed comparisons of the machines you are considering before you buy. What are the job requirements, machine attachments and operating hours? What production is needed? Your Cat dealer can provide recommendations.

Customer Support Agreements
Cat dealers offer a variety of product support agreements, and work with customers to develop a plan the best meets specific needs. These plans can cover the entire machine, including attachments, to help protect the customer’s investment.

Operation
Improving operating techniques can boost your profits. Your Cat dealer has videotapes, literature and other ideas to help you increase productivity, and Caterpillar offers certified operator training classes to help maximize the return on your investment.

Maintenance Services
Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as Scheduled Oil Sampling, Coolant Sampling and Technical Analysis help you avoid unscheduled repairs.

Replacement
Repair, rebuild, or replace? Your Cat Dealer can help you evaluate the costs involved so you can make the right choice.

EQUIPMENT
Standard Equipment

Electrical
  • 65 ampere alternator
  • Base machine light (frame)
  • Lights, cab mounted (Two)
  • Horn
  • Pre-Start monitoring system - checks for low fluids
Operator Environment
  • Air conditioner, heater, defroster with automatic climate control
  • AM/FM radio with antenna and 2 speakers
  • Ashtray with 24 volt lighter
  • Beverage/cup holder
  • Bolt-on Falling Object Guarding System (FOGS) capability
  • Cab Glass
  • Coat hook
  • Floor mat
  • Instrument panel and gauges
  • Joysticks, console mounted, pilot operated
  • Light - interior
  • Literature compartment
  • Monitor, full graphic color display
  • Neutral lever (lock out) for all controls
  • Polycarbonate side windows
  • Positive filtered ventilation
  • Pressurized cab
  • Seat, suspension, with high back and head rest
  • Seat belt, retractable (76 mm [3 in])
  • Storage compartment suitable for lunch box cooler
  • Sun shade (for skylight)
  • Travel control pedals with removable hand levers
  • Windshield wiper and washer (upper and lower)
  • Hydraulic Cab Riser
Engine/Power Train
  • C9 with ACERT Technology
  • Cooling Package
  • Radial seal air filter
  • Auto reversing fan
  • Automatic engine speed control with one-touch low idle
  • Two speed auto-shift travel
  • Filters on rear door for cooling
Undercarriage
  • Grease lubricated track
  • Hydraulic track adjusters
  • Idler and center section track guards
  • Track shoes - 800 mm (32 in) triple grouser
  • Heavy-duty track rollers
  • Swing bearing guard
Other Standard Equipment
  • Automatic swing parking brake
  • Auxiliary hydraulic valve
  • Counterweight with lifting eyes
  • Door locks, cap locks, and Caterpillar® one key security system
  • Fine swing control
  • Fully pressurized hydraulic system
  • Heavy lift
  • Mirrors (frame-right, cab-left)
  • S•O•SSM quick sampling valves for engine and hydraulic oil
  • Travel alarm
  • Wiring provision for Product Link
  • Heavy duty upper frame
  • Heavy counterweight (25% over standard)
  • Heavy duty swing bearing
  • Rubber bumpers
  • Swivel guard

Optional Equipment

Front linkage
  • Booms
  • Sticks
  • Bucket Linkage
  • Boom lowering control device
Electrical
  • Power supply (12V-10 Amp)
  • Power supply (12V - 20 Amp)
  • Beacon
  • Easy access electrical disconnect
Guarding
  • Falling Object Guarding System (FOGS)
  • Track Guiding Guards
Operator Environment
  • Rear window, secondary exit
  • Precleaner arrangement
  • Seat, high back with air suspension and heater
  • Third pedal, straight travel
  • Cab air filter system
Undercarriage
  • Track Shoes
Work Tools
  • Grapples (waste)

CONNECT. DISCUSS. SOLVE.
CATERPILLAR EQUIPMENT MAINTENANCE ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Cat 246
my cat 246 was running fine when we parked it . the next day turned the key on, had buzzer, glow plu...  [More]

CAT 307C 2004 Hydraulic Drawings
I've got an older colleague with a 307C 2004-model excavator. He came to me asking if it's possible...  [More]

Over Excitation Shutdown Problem For 3512 Diesel Generator
please give any advice to me.. i have using caterpillar 3512 generator from last 4 months in my...  [More]

Fuel Lines
I need help I have a D4D dozer 1974 year model and the s/n 82j3434 . I bought it ran great went back...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.