330B L UHD

The 330B L Ultra-high demolition is heavy-duty purpose built for your demolition job.

Engine Model Cat® 3306 TA diesel engine
Net Flywheel Power 222 hp
Net Power - ISO 9249 222 hp
Bore 4.75 in
Stroke 6 in
Displacement 640 in3
Gross Power 236 hp
Net Power - EEC 80/1269 222 hp
Net Power - SAE J1349 222 hp

Operating Weight - Std. Undercarriage 87252 lb

Maximum Drawbar Pull 60250 lb
Maximum Travel Speed 2.9 mph

Hydraulic System
Main Implement System - Maximum Flow (2x) 63 gal/min
Max. Pressure - Equipment 4980 psi
Max. Pressure - Travel 4980 psi
Max. Pressure - Swing 4330 psi
Pilot System - Maximum Flow 9.8 gal/min
Pilot System - Maximum Pressure 595 psi

Service Refill Capacities
Fuel Tank Capacity 145 gal
Cooling System 11.9 gal
Engine Oil 7.9 gal
Swing Drive 4 gal
Final Drive (each) 4 gal
Hydraulic System (including tank) 106 gal

Brakes SAE J1026, ISO10265

Standard w/Long Undercarriage - Triple Grouser 24 in

Auxiliary flow is programmable for ease of switching hydraulic tools.

Control Responsiveness
Dramatically increased control responsiveness aids operation and improves controllability at higher heights.

Swing Control
Fine swing control cushions swing start and stop for better implement control.

Hydraulic Flow Control System
Auxiliary hydraulic flow control system provides four programmable flow presets to precisely match hydraulic tool requirements.

Durable undercarriage absorbs stresses and provides excellent stability.

The L Undercarriage
The L Undercarriage provides a stable and rugged working platform for demolition.

Track Guiding Guards
Full length track guiding guards complete the machine's guarding package.

Optional Hydraulic Adjustable Undercarriage
The optional hydraulic adjustable undercarriage increases the stability by lowering the center of gravity of the machine, resulting in the usage of a bigger tool.

Operator Station
Designed for comfort and ease of operation.

Ergonomic Control Placement
This operator work station is quiet with ergonomic control placement and convenient adjustments, low lever and pedal effort, ergonomic seat design, and highly efficient ventilation. The result is a cab that puts the operator firmly and comfortably in control to enhance productivity.

High Visibility Cab
High visibility cab with the front window made out of laminated safety glass.

Falling Object Guard
Falling object guard on the top and front is standard. Crossbars of top guard are angled in line with sight for enhanced visibility to the tool.

Control Convenience
Each of the controls is positioned within easy reach of the operator.

Upper Frame and Counterweight
Purpose built for extreme conditions.

Box-section Cylinder Mounts
Box-section cylinder mounts help handle increased torsional loads and payloads.

Mounting Plate
Horizontal mounting plate provides up to 75% more surface area for swing drive and swing bearing mounting bolts.

Main Rail Spreader Gussets
Thicker main rail spreader gussets handle increased loads and movements.

Steel Main Frames
Steel main frames are 15-20% thicker with a 55% increase in tensile strength.

Doubler Plates
Boom tower vertical doubler plates add reinforcement for increased side loads and payloads.

Swing Bearing
Swing bearing to upper frame bolts are 20 mm (0.8 inches) longer on the back half of upper frame for increased joint retention.

Heavier counterweight balances the swing bearing and provides enhanced stability.

Upper Frame Protection
Heavy-duty bottom and swivel guards are standard. Optional additional bumpers help protect the sheet metal against debris caught by the tracks.

Booms, Sticks and Working Tools
Maximum versatility gets the best out of your machine.

Two Piece Main Boom
Two piece main boom with the pin-mounted joint between boom foot and boom nose.

Retrofit Capability
Retrofit capability with short 2-position boom nose on boom foot for clean-up, demolition (hammer use) and digging.

Special Stand
Special stand to support long boom or short retrofit boom when changing configuration.

Demolition Sticks
Purpose built demolition sticks match the short boom nose.

Lowering Control Devices
Lowering control devices are installed on all boom and stick cylinders.

Electronic Warning Device
An electronic warning device signals the operator when the main boom gets out of the recommended working range.

Complete Customer Support
Cat dealer services help you operate longer with lower costs.

Make detailed comparisons of the machines you are considering before you buy.

Look past the initial price. Consider the financing options available as well as day-to-day operating costs. This is also the time to look at dealer services that can be included in the cost of the machine to yield lower equipment owning and operating costs over the long run.

Improving operating techniques can boost your profits.

What is the cost of preventive maintenance? More and more equipment buyers are planning for effective maintenance before buying equipment.

Repair, rebuild, or replace? Your Cat dealer can help you evaluate the cost involved so you can make the right choice.

Product Support
You will find nearly all parts at our dealer parts counter. Cat dealers utilize a worldwide computer network to find in-stock parts to minimize machine down time.



Cat 246
my cat 246 was running fine when we parked it . the next day turned the key on, had buzzer, glow plu...  [More]

CAT 307C 2004 Hydraulic Drawings
I've got an older colleague with a 307C 2004-model excavator. He came to me asking if it's possible...  [More]

Over Excitation Shutdown Problem For 3512 Diesel Generator
please give any advice to me.. i have using caterpillar 3512 generator from last 4 months in my...  [More]

Fuel Lines
I need help I have a D4D dozer 1974 year model and the s/n 82j3434 . I bought it ran great went back...  [More]
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.