CB-334E

Based upon the industry-proven reputation of the Caterpillar Asphalt Compactors, the CB-334E establishes innovative new standard for productivity and reliability in the asphalt compaction industry. Durable Cat powertrain, field-proven hydraulic systems and vibratory systems, and the world's largest and most dedicated dealer support system ensures that the CB-334E asphalt compactor will provide maximum productivity.


SPECIFICATIONS
Weights
Operating Weight at Rear Drum with ROPS/FOPS 4410.0 lb
Operating Weight at Front Drum with ROPS/FOPS 4278.0 lb
Operating Weight with ROPS/FOPS 8688.0 lb


Operating Specifications
Curb Clearance 23.5 in
Turning Radius Outside Drum Edge 169.0 in
Turning Radius Inside Drum Edge 118.0 ft
Ground Clearance 11.0 in
Travel Speed - Maximum 8.0 mph


Engine
Gross Power 46.0 hp
Net Power - EEC 80/1260 44.25 hp
Net Power - ISO 9249 44.0 hp
Bore 3.3 in
Stroke 3.94 in
Engine Model Cat® 3024C


Service Refill Capacities
Fuel Tank Capacity 15.0 gal
Water (Spray) Tank Capacity 79.0 gal


Vibratory System
Drum Width 51.0 in
Drum Diameter 31.0 in
Frequency 4140.0 vpm
Vibration Selection front, rear or both
Eccentric Weight Drive Hydraulic
Centrifugal Force per Drum - Maximum 7448.0 lb
Nominal Amplitude - High 0.01 in


Dimensions
Overall Length 123.0 in
Wheelbase 91.0 in
Height at Steering Wheel 72.0 in
Height with ROPS/FOPS 100.0 in
Compaction Width 51.0 in
Overall Width 55.0 in


BENEFITS & FEATURES
Caterpillar® 3024C Engine
The Caterpillar® 3024C engine provides efficient power while meeting U.S. EPA Tier 2 and E.U. Stage II engine emission requirements.


Power
The Caterpillar® 3024C engine provides a gross power of 34.1 kW (46 hp) and a torque of 143 Nm for good performance and reliability in tough conditions.

Large Cooling System
The large cooling system keeps engine temperatures low in order to maximize fuel efficiency and minimize emissions.

High Ambient Cooling
The high ambient cooling system provides efficient operation in high ambient temperatures.

Operator's Station
The convenient, comfortable operating environment with three-position seating provides good visibility and promotes day-long productivity.


Operator’s Station
The operator’s station incorporates a fully-equipped console and an adjustable suspension seat.

Instrument Panel
The easy-to-understand instrument panel integrates a fuel level indicator, hour meter and light indicators for machine functions.

Pre-Heat Ignition System
The key switch includes an automatic engine pre-heat feature in order to assist in cold-weather starting.

Traction Control (Optional)
The traction control system transfers torque between the front and rear drums.

Vibratory System
The vibratory system provides good balance between frequency and amplitude in order to meet various job site conditions.


Dual Frequency Vibratory System
The standard vibratory system incorporates two frequencies of 61 Hz (3,660 vpm) and 69 Hz (4,140 vpm) and an amplitude of 0.37 mm (0.015") in order to provide application versatility.

Vibratory Selection
A vibratory selection switch provides front, rear and both drum vibratory capabilities.

Automatic Vibratory Control
The vibratory system includes an automatic start feature that activates whenever the propel lever is moved from the neutral position.

Rear Drum Vibratory Delay
The rear drum vibratory delay feature controls the start of the rear drum in order to assist power management on slopes.

Water Spray System
Corrosion-proof components provide long life and reliable operation.


Spray Capabilities
The standard pressurized water spray system with constant or intermittent capabilities provides extended operation between refills. The intermittent spray setting increases spray time by 50% over the continuous setting.

Water Pump and Filters
The extended life water pump and filters are conveniently located for easy access while providing optimum spray and flow.

Water Filtration
Triple water filtration reduces machine downtime caused by system clogs.

Large Water Tank Fill and Drain
The large water tank fill and drain allow the system to be filled and drained within minutes.

Drum Design
The Caterpillar drum design delivers high production and a smooth mat surface.


Drum Edges
The drum edge design promotes a smooth surface and reduces marks on lifts when turning.

Folded Drum Supports
The folded drum supports provide good visibility to the ground contact points.

Self-Adjusting Scrapers
Each drum is fitted with two retractable, spring-loaded, selfadjusting scrapers. The scrapers are designed for even wear.

Replaceable Rubber Mounts
The rubber mounts isolate vibration and enhance vibratory capabilities.

Easy Access Tie-Down
The tie-down location provides easy access for quick loading and unloading.

Reliability and Serviceability
The CB-334E provides the reliability and serviceability that you’ve come to expect from Caterpillar.


Vertical Lift Engine Enclosure
The vertical lift engine enclosure allows fast access to routine service points.

Water Spray System
The filters can be easily removed without the use of special tools.

Extended Life Oils
Extended life oils increase maintenance intervals for the engine oil, hydraulic system and vibratory system. Remote mounted drains provide simplified collection of fluids.

Quick-Connect Hydraulic Test Ports
The quick-connect hydraulic test ports simplify system diagnosis.

Oil-bath Lubrication
An oil-bath lubricates the eccentric weight bearings, extending routine maintenance to 3 year/3000 hour intervals.

EQUIPMENT
Optional Equipment

Roll Over Protective Structure (ROPS)
Foldable ROPS
Sun Canopy
Traction Control
Working Light Package
Roading and Working Light Package
Light Protector Grids
Warning Beacon
Battery Disconnect Switch
Engine Tachometer
Suspension Seat
Suspension Seat with Seat Switch
Brake Release Pump
Cocoa Mats
Water Distribution Mats
Spark Arrestor Muffler
Non-Machined Drum Edges
Drum End Guards

CONNECT. DISCUSS. SOLVE.
CATERPILLAR EQUIPMENT MAINTENANCE ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Cat 246
my cat 246 was running fine when we parked it . the next day turned the key on, had buzzer, glow plu...  [More]

CAT 307C 2004 Hydraulic Drawings
I've got an older colleague with a 307C 2004-model excavator. He came to me asking if it's possible...  [More]

Over Excitation Shutdown Problem For 3512 Diesel Generator
please give any advice to me.. i have using caterpillar 3512 generator from last 4 months in my...  [More]

Fuel Lines
I need help I have a D4D dozer 1974 year model and the s/n 82j3434 . I bought it ran great went back...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.