With a more comfortable operator station, new extendible stick design and increased performance, the 416E lets you get more done with less effort.

Net Power - SAE J1349 87.0 hp
Engine Model (Standard) Cat® C4.4 DITA
Gross Power - SAE J1995 96.0 hp
Net Power - ISO 9249 88.0 hp
Gross Power - ISO 14396 94.0 hp
Net Power - EEC 80/1269 88.0 hp
Bore 4.13 in
Stroke 5.0 in
Displacement 268.0 in3
Net Torque Rise @ 1400 rpm - Standard 35.0 %
Net Peak Torque @ 1400 rpm - Standard - SAE J1349 283.0 lb ft
Net Peak Power @ 2,000 - SAE J1349 89.0 hp
Net Peak Power @ 2,000 - ISO 9249 90.0 hp
Net Peak Power @ 2,000 - EEC 80/1269 90.0 hp

Dig Depth - Standard 14.3 ft
E-Stick Retracted 14.44 ft
E-Stick Extended 17.9 ft
Reach from Swing Pivot - Standard 18.43 ft
E-Stick Retracted 18.56 ft
E-Stick Extended 21.87 ft
Bucket Rotation 205.0 Degrees
Bucket Dig Force - Standard 11749.0 lb
E-Stick Retracted 11491.0 lb
E-Stick Extended 11491.0 lb
Stick Dig Force - Standard 7200.0 lb
E-Stick Retracted 7200.0 lb
E-Stick Extended 5250.0 lb
Stick Lift @ 2440 mm (8 ft) - Standard 5005.0 lb
E-Stick Retracted 4539.0 lb
E-Stick Extended 2839.0 lb
Loading Height - Standard 11.9 ft
E-Stick Retracted 11.74 ft
E-Stick Extended 13.6 ft
Loading Reach - Standard 6.0 ft
E-Stick Retracted 6.16 ft
E-Stick Extended 9.09 ft

Operating Weight - Maximum 22466.0 lb
Operating Weight - Nominal 14881.0 lb
Cab, ROPS/FOPS 573.0 lb
Ride Control 55.0 lb
Four Wheel Drive 342.0 lb
Extendible Stick (no weights) 659.0 lb
Air Conditioning 86.0 lb
Counterweights (Option 1) 255.0 lb
Counterweights (Option 2) 510.0 lb
Counterweights (Option 3) 1075.0 lb

Bucket Capacity - General Purpose 1.0 yd3
Bucket Width - General Purpose 7.42 ft
Dump Height @ Max Angle - Single Tilt 8.66 ft
Dump Reach @ Max Angle - Single Tilt 2.5 ft
Dig Depth - Single Tilt 4.0 in
Lift Capacity @ Full Height - Single Tilt 6180.0 lb
Bucket Breakout Force - Single Tilt 10036.0 lb

Hydraulic System
Circuit Type Closed center, load sensing
Pump Capacity (@ 2200 rpm) 34.8 gal/min
System Pressure - Backhoe 3300.0 psi
System Pressure - Loader 3000.0 psi
Pump Type Variable-flow, axial piston
Steering Type Front wheel
Power Steering Hydrostatic, HMU
2WD Cylinder - Bore 2.6 in
Stroke 4.7 in
Rod Diameter 1.4 in
4WD Cylinder - Bore 2.6 in
Stroke 4.7 in
Rod Diameter 1.4 in
Brake System Inboard, oil-immersed, multiple disc

Power Train
Power-Shuttle, Forward 1st 3.7 mph
Forward 2nd 5.9 mph
Forward 3rd 12.0 mph
Forward 4th 25.0 mph
Power-Shuttle, Reverse 1st 3.7 mph
Reverse 2nd 5.9 mph
Reverse 3rd 12.0 mph
Reverse 4th 25.0 mph

Operating Specifications - Backhoe
Turning Circle: outside, front wheels 26.8 ft
Turning Circle: outside, widest loading bucket 36.0 ft

Axle Ratings
Front Axle, 2WD, Static 50582.0 lb
Dynamic 20233.0 lb
Front Axle, 4WD, Static 50582.0 lb
Dynamic 20233.0 lb
Rear Axle, Static 50582.0 lb
Dynamic 20233.0 lb

Service Refills
Cooling System 5.4 gal
Fuel Tank 45.0 gal
Engine Oil w/Filter 2.0 gal
Transmission-Torque Converter, 2WD, Power Shuttle 4.9 gal
Transmission-Torque Converter, 4WD, Power Shuttle 4.9 gal
Rear Axle 4.4 gal
Rear Axle, Planetaries 0.4 gal
Front Axle, 4WD 2.9 gal
Front Axle, Planetaries 0.2 gal
Hydraulic System 23.8 gal
Hydraulic Tank 10.0 gal

Brakes SAE J/ISO 3450, ISO 3450 1996
Cab - ROPS SAE J1040 May 1994/ISO 3741 1994
Cab - FOPS SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Cab - Sound ANSI/SAE J1166 Oct 98 is 80 dB (A)
Exterior Sound SAE J88 JUN86 is 76 dB (A)

Operator Station
Offers comfort, visibility and style.

Operator Station

Experience a whole new level of comfort with the spacious E-Series operator station. The ergonomic, automotive style enhances the operator environment. A narrow front dash provides excellent visibility to the front bucket. Reduced vibration keeps operator fatigue low. In-cab storage compartment and lockable tool and battery box provides ample space for tools and belongings. The operator station also features an easy-to-read gauge cluster.

Air Suspension Seat
The standard air suspension seat is adjustable for a greater operating range and more comfortable ride. A switch allows the seat to be tailored to support differing body weights. Adjustable seat height accommodates all operators.

Improved Air Conditioning
The improved air conditioning system features enhanced air distribution and performance for a more comfortable work environment. A nearly 20% increase in air flow over the D-Series combined with improved louver locations provide superior operator comfort.

Backhoe Controls
Two mechanical control patterns are available: two lever excavator, and two lever backhoe.

The 416E operator station is available in 5 options - ROPS Canopy, ROPS Canopy Plus, Utility Cab, Utility Cab Plus and Utility Cab Plus with Air Conditioning. See Standard and Optional Equipment for details.

Load-sensing system matches power to demand.


The 416E has a load-sensing, closed center hydraulic system, which closely matches power and flow to the demand needed by the implements. So whether you're in full trenching mode, or delicately digging around services, you are in control. In applications such as production trenching, speed is important and the system will match the flow needed to get the job done quickly and efficiently. The load-sensing hydraulic system also delivers:
  • A cooler hydraulic system
  • Better fuel efficiency
  • Quieter operation
  • Reduced wear on components
Cat XT™-3 ES ToughGuard™ hoses combined with Cat couplings and O-ring face seal fittings provide a leak-free system. The 416E also features new flow-sharing hydraulic valves, ensuring proportional flow of oil to all hydraulic cylinders, providing greater control and improving multi-function performance.

Ride Control
Delivers even greater operator comfort.

Ride Control

The optional Ride Control System smoothes the ride in all conditions, including load and carry, highway roading, or simply moving around the job site. It reduces machine loping, providing a smooth and stable ride for increased operator comfort and reduced operator fatigue. The Ride Control option improves material retention in the loader bucket for increased productivity and a cleaner job site. The system is easily engaged by an On/Off switch on the front console.

Power Train
Built for performance, power, reliability and fuel efficiency.

Power Train

Cat Engine
The 416E features the Cat® C4.4 DITA (Direct Injection Turbocharged Aftercooled) engine and meets all U.S. EPA Tier 3/EU Stage IIIa emissions requirements. Horsepower and torque rise deliver strong loading and roading performance.
  • The water separator service indicator ensures the operator is alerted when service is necessary.
  • Dry-type axial seal air cleaner with automatic, integrated dust ejection system for more efficient pre-separation.
Both air cleaner and precleaner functions are incorporated into a single unit mounted under the hood.

The Cat standard power shuttle transmission provides four speeds forward and reverse. Hydraulically shifted clutches allow on-the-go direction and travel speed shifts.
  • Hydraulic proportional control valves smooth speed and directional shifts.
  • Four Wheel Drive (4WD) option improves mobility and loader performance in poor underfoot and can be activated on-the-go.
  • Maximum roading speed of 40 km/h (25 mph) for faster travel between job sites.
  • Cat Rear Axles are designed specifically for demanding backhoe loader applications.
Axles feature outboard planetary gear sets for easy serviceability and brake design improvements for longer service life.

Brake Mode Selector
The brake mode selector switch has three positions: two wheel drive, two wheel drive with all wheel braking and four wheel drive. Two wheel drive with all wheel braking provides better tire life while roading and engages the front axle when brakes are applied for improved braking performance.

Designed for high performance and easy service.


The E-Series backhoe delivers industry-leading digging forces. Serrated edges on the stick provide improved material clamping for clearing and demolition applications. The single pin bucket linkage contributes to best-in-class rotation of 205 degrees for all applications.

E-Stick Design
The optional extendible stick (E-stick) increases reach and dig depth by approximately 1.2 meters (4 feet). The new design delivers increased life and easy in-field adjustment with common hand tools.

Curved Boom
The excavator-style boom is built for optimum performance and durability. The curved design provides additional clearance over obstacles while digging a trench or truck loading. The narrow boom enhances the viewing area to the bucket and trench throughout the entire operating range.

Thumb mounting provisions are standard on every Cat Backhoe Loader for added machine versatility. Hydraulic thumbs are available factory-installed. Mechanical thumbs are available through your Cat Dealer.

Strong lift & breakout.


Single Tilt
The standard single tilt loader linkage on the 416E features strong lift and breakout forces for solid performance in backfilling and truck loading applications. The 416E is equipped with either a general purpose or multi-purpose pin-on bucket to meet your specific needs.

The return-to-dig system reduces loading cycle times by bringing the loader bucket back to the dig position with an easy pull of the lever. By the time the loader bucket is at ground level, the bucket is angled correctly for the next load or cut.

Technology Products
Advanced technologies improve productivity and simplify serviceability.

Technology Products

AccuGrade™ System
The AccuGrade system for backhoe loaders improves digging accuracy and site safety by eliminating the need for manual grade measuring. Both the Site and Laser Reference Systems save time and money in a variety of digging and trenching applications.

Site Reference System
The Site Reference System allows the operator to excavate to pre-determined coordinates. The intuitive software and controls allow the operator to set target grades. An in-cab display allows the operator to enter slope and dig depth parameters. Easy to read grade indicator and elevation display delivers all system information to the cab for easy viewing by the operator. System includes rugged components built to withstand the harshest environments:
  • In-cab display
  • Cylinder position sensors
  • Swing position sensor
  • Inclinometer
  • Wiring harnesses

Laser Reference System
The Laser Reference System works with laser transmitters to accurately grade or excavate to a site plan without the use of grade stakes. The Laser System includes all the components of the Site Reference System with the addition of the following:
  • Laser receiver
  • Electric mast and mount
  • Laser wiring harness
Note: Laser transmitter and tripod sold separately

Product Link
Product Link uses GPS technology to provide machine data, including service hours, location, events and diagnostic information, to you through a web-based application or e-mail/pager notification.

Work Tools
Do more jobs with one machine.

Work Tools

Backhoe Work Tools
A large selection of backhoe tools - including a new hydraulic thumb - gives you the flexibility to serve more customers, more profitably.
  • Standard Duty, Heavy Duty, Heavy Duty Rock, Pin Lock, Soil Excavation, Coral & Ditch Cleaning Buckets
  • Cold Planer
  • Hydraulic Hammer
  • Auger
  • Ripper
  • Mechanical & Hydraulic Thumbs
  • Quick Coupler
  • Vibratory Plate Compactor

Loader Work Tools
The loader tool line includes the following:
  • General Purpose Bucket
  • Multi Purpose Bucket
  • Side Dump Bucket
  • Light Material Bucket
  • Loader Forks

The right bucket makes all the difference
To get top performance from your Cat backhoe loader, be sure your machine is equipped with the proper bucket and tips. The soil excavation bucket provides the best productivity in most conditions.

DRS 230 (Diagonal Retention System)
Heavy-duty bucket teeth are attached with diagonal pins rather than horizontal pins for easy exchange.

Easy access and minimal maintenance requirements maximize uptime.


Convenient service features make maintenance easy, reducing your downtime.
  • Tilt-up hood provides convenient access to all engine check points.
  • Fill caps are color-coded for quick identification.
  • S•O•SSM, Coolant Sampling and Technical Analysis help you avoid unscheduled repairs.
  • Caterpillar is committed to providing you with a safe work environment.
For more information please visit SAFETY.CAT.COM™.

Customer Support
Makes the difference.

Customer Support

Your Cat dealer is ready to assist you with your purchase decision and everything after.
  • Financing packages are flexible to meet your needs.
  • Your Cat dealer can evaluate the cost to repair, rebuild and replace your machine, so you can make the right choice.
  • Nearly all parts are available at your Cat dealer parts counter.
  • See your dealer's website or www.cat.com to customize the machine that is right for you using the Build and Quote applications. Also find information on other Cat products, dealer services and industry solutions.

Standard Equipment

Air cleaner
Alarm, back-up
Backhoe position footrests
Backhoe controls, 2-lever mechanical
  • backhoe pattern
Battery, maintenance-free, 880 CCA
Battery disconnect switch
Boom transport lock
Brace, lift cylinder
Brake, secondary parking
Brakes, oil disc, dual pedals, interlocking
Bucket level indicator
Coat hook
Coolant/Antifreeze, extended life
Counterweight, bumper
Differential lock
Dome light (cab only)
Engine, Cat® C4.4 DITA
  • (Direct Injection Turbocharged and Aftercooled)
Engine enclosure
Face seals, O-ring
Fan, suction and guard
Fast reversing shuttle, all gears
Fenders, rear
Filters, spin-on: fuel, engine oil,
  • transmission oil, water separator, hydraulic fluid
Flashing hazard/signal lights
Floor mat
Gauges: coolant temperature, fuel level,
  • tachometer, hour meter, torque converter oil temperature
Ground level fuel fill
High ambient cooling package
Hydraulic hose, XT™-3 ES
Hydraulic oil cooler
Indicators: air cleaner service, water
  • separator service, brake on, engine coolant, hydraulic oil level sight gauge, oil pressure
Instrument panel lights
Key start/stop system
Lights, working (2 front, 2 rear)
Loader, self-leveling, return-to-dig and
  • transmission disconnect switch
Lunch box holder
Mirror, rear view
Open circuit breather
Power receptacle, 12V, internal
  • and external
Power steering, hydrostatic
Rubber impact strips on radiator guard
Seat belt, retractable (51 mm/2 in)
Stabilizer shoes, grouser type
Seat, air suspension with armrest
Stabilizer controls, cable operated
Starting system, glow plugs
Storage compartment, internal
Stop and tail lights
Swing transport lock
Tilt steering wheel
Tires, see page 12
Toolbox, external, lockable
Torque converter
Throttles, hand and foot
Transmission, four speed, syncromesh
Transmission neutralizer switch
Transport tie-downs
Warning horn, electric

Optional Equipment

AccuGrade™ Site Reference System for Backhoe Loaders
AccuGrade Laser Reference System for Backhoe Loaders
Attachments, backhoe
  • Mechanical Quick Coupler
Attachments, front loader
  • General purpose buckets
  • Multi purpose buckets
Axle, front
  • Four wheel drive with driveshaft guard
Backhoe Controls
  • Excavator pattern
Battery, additional, 880 CCA
Cab, utility
Cab, utility plus
Cab, utility plus with A/C
Canopy Plus, ROPS
Coolant, additional protection, -50° C (-58° F)
  • 116 kg (255 lb)
  • 231 kg (510 lb)
  • 488 kg (1,075 lb)
Cutting edge, bolt-on, two piece
Fenders, 4WD, front
Fenders, rear extensions
  • Boom protection plate
  • Stabilizer, rock
Hydraulic valves, loader (3rd valve for MP)
Hydraulic valves, backhoe
  • 5th Function
  • 6th Function
Hydraulic lines
  • Combo, Std Stick
  • Combo, E-Stick
  • One-way, E-Stick
Lights: Working, additional (2 front, 2 rear)
Product Link
Ride Control
Rotating beacon
  • Magnetic mount
Seat belt, 75 mm (3 in)
Stabilizers, available with guards
  • Street
  • Reversible
  • Extendible
Teeth, loader bucket
Vandalism protection
  • Gauge cover
  • Padlocks
  • Hood lock



Cat 246
my cat 246 was running fine when we parked it . the next day turned the key on, had buzzer, glow plu...  [More]

CAT 307C 2004 Hydraulic Drawings
I've got an older colleague with a 307C 2004-model excavator. He came to me asking if it's possible...  [More]

Over Excitation Shutdown Problem For 3512 Diesel Generator
please give any advice to me.. i have using caterpillar 3512 generator from last 4 months in my...  [More]

Fuel Lines
I need help I have a D4D dozer 1974 year model and the s/n 82j3434 . I bought it ran great went back...  [More]
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.