BARBER-GREENE BG655D

High production capability and optimum paving quality combined with high travel speed and smooth ride are the basic features of the new BG655D. With many enhanced features and options, the BG655D powerful traction guarantees optimum results and a continuous production even on irregular terrains.


SPECIFICATIONS
Weights
Maximum Operating Weight 42252.0 lb
Tractor Weight 33775.0 lb


Operating Specifications
Standard Paving Width 2.55-5.0 m (8.17-16.40 ft)
Paving Width Minimum 6.0 ft
Paving Width Maximum 20.17 ft


Engine
Gross Power 174.0 hp
Net Power (ISO 9249) 163.5 hp
Net Power (SAE J1349) 164.5 hp
Bore 3.94 in
Stroke 5.0 in
Displacement 439.0 in3
Flywheel Power 152.3 hp
Engine Model Cat C6.6 Engine with ACERT Technology
Net Power (EEC 80/1269) 163.5 hp


Drive System
Maximum Paving Speed 230.0 ft/min
Maximum Travel Speed 9.0 mph


Service Refill Capacities
Fuel Tank Capacity 77.0 gal


Hopper
Hopper Capacity 230.0 ft3
Truck Entry Width 10.5 ft
Truck Dump Height 2.0 ft


Dimensions
Track Contact Length 10.0 ft
Overall height 12.5 ft
Transport height (muffler removed) 9.25 ft


BENEFITS & FEATURES
Cat® C6.6 Engine with ACERT™ Technology
ACERT™ Technology manages combustion using a combination of air management, precise fuel delivery and careful timing in order to lower emissions and meet U.S. EPA Tier 3 engine emissions requirements.


High Capacity Cooling System
The deck-mounted cooling system provides a cool environment by exhausting hot air toward the hopper, away from operators and ground personnel.


High Ambient Temperature Cooling System
The standard, high-capacity cooling system provides efficient operation in high ambient temperatures. The system design provides quiet operation that benefits the operator and the surrounding environment.

Efficient Airflow Design
The airflow design draws ambient air across the engine compartment and through the coolers. This design allows the exhaust air to exit toward the hopper in order to provide a cooler engine compartment and cooler operating environment.

Variable Speed Fan
The variable speed fan is electronically controlled and hydraulically driven to provide on-demand cooling. This on-demand operation reduces engine power demand, lowers sound levels, and increases fuel efficiency.

Operator Comforts for a Productive Environment
The dual operating stations offer the best-in-class comfort, visibility and ease of use.


Dual Operating Stations
The dual operating stations incorporate fully equipped consoles, ground speed indicators, adjustable suspension seats with cup holders, armrests, and 76 mm (3") retractable seat belts.

Operator Visibility
The dual operator's stations can be positioned in one of four different locations to provide optimum visibility. The stations can extend beyond the machine frame for good visibility when paving applications require precise control.

Tilting Consoles
The tilting consoles increase operator comfort by offering multiple positions. A 12-volt power supply located on the right console allows for the use of accessories.

Advisor Monitoring System Simplifies Operation
The left operating console includes the Advisor Display that provides many unique features to assist the operator.


Advisor Monitoring System (AMS)
The Advisor display provides access to a start-up checklist, operator preferences, engine and machine operating parameters, “Paving Calculator”, and “Paving by the Numbers.”

Mobil-trac Undercarriage Performs in All Applications
The Mobil-trac™ undercarriage provides superior durability while delivering unmatched mobility, ride, and traction in a variety of conditions.


Mobil-trac Undercarriage
The Mobil-trac undercarriage combines the flotation and traction benefits of a crawler suspension with the mobility and ride quality of a wheel-type paver. The Mobil-trac system includes a durable, high strength rubber track belt with a thick outer cover and internal layers of flexible steel cable.

Large Ground Contact Area
The Mobil-trac’s ground contact area is 3020 mm (119") long and 406 mm (16") wide. This large footprint provides uniform weight distribution over the entire length of the belt.

Choice of Belt Designs
The Mobil-trac system offers a tread-bar style belt or a smooth belt. Both belt styles are 58 mm (2.3") thick and provide good performance and wear characteristics, however, the smooth belt with beveled edges provides less disturbance on soft base materials.

Two Speed Planetary Drive
A fixed displacement motor drives a two-speed planetary providing quick mobility around the job site.

Steel Track Undercarriage
The steel track undercarriage is available as an economic alternative to the Mobil-trac.


Quad Rear Bogie
A special quad bogie is positioned near the rear of the steel track in order to evenly distribute the load.

D3 Track Rails
The steel track system incorporates D3 dozer track rails. The sealed and lubricated links include a split master link for dependable performance.

Long Life Bonded Track Pads
The track pads contain a special rubber compound in order to provide long life and good traction.

Single Speed Planetary Drive
A variable displacement motor drives a single-speed planetary that provides variable speed selection.

Large Ground Contact Area
The steel track’s ground contact area is 3048 mm (120") long and 356 mm (14") wide. This large footprint provides uniform weight distribution over the length of the track.

Independent Material Handling System Promotes Hands-Free Operation
The gateless material handling system promotes hands-free operation by providing features such as ratio control dials, and independent control of each auger and each conveyor.


Precise Mix Delivery
The material delivery system provides precise mix delivery with minimal operator monitoring. The left and right conveyors in addition to the left and right augers are controlled independently. The ability to control these four components separately eliminates the need for feeder gates.

Ratio Control
The ratio of conveyor speed to the maximum auger speed is automatically maintained through the controller when changing paving speed. This ratio control feature is helpful when paving wider or thicker on one side of the screed.

Outboard-Mounted Conveyor Drives
The conveyors have outboard-mounted motors, reducers and drive chains that maximize the tunnel area and reduce segregation.

Gateless System
The gateless conveyors run full of mix regardless of the auger speed. When changes in conveyor speed are required, delivery of mix to the augers is immediate. By not always having to run the conveyors at full speed, component wear is significantly reduced. Running at slower speeds can also help reduce the opportunity for segregation, especially when working with larger stone mixes that have a tendency to segregate.

Independent Auger Drive
The auger drive assembly is independent of the tractor, which allows the distance between the two conveyors to be significantly reduced. Keeping the conveyors close together allows the material to flow together more easily as it discharges into the auger cavity. The tunnel and auger design eliminates voids under the chain case in order to minimize segregation.

Adjustable Auger Range
The auger assembly is hydraulically adjustable with a range up to 215 mm (8.5"). The ability to adjust the auger assembly simplifies loading and unloading from a transport vehicle. Also, when working with larger stone mixes, the augers can be adjusted to allow the mix to flow unrestricted under the auger assembly.

Generator System Provides Quiet Power
The high capacity generator provides power for the electric screed heat, auxiliary lights and job site tools.


Industrial, Single-Phase A.C. Generator
The tractor-mounted generator provides 25 kW of power at 60 Hz for the electric screed heat and the auxiliary power panel. Circuit breaker protection, internal electronic voltage regulation and a dual bearing design provide reliability.

Choices Available (Belt or Hydraulic Driven):
The belt-driven generator provides full power with a variable frequency when the engine speed increases above 1275 rpm. The hydraulic-driven generator provides full power with a fixed frequency of 60 Hz when the engine speed increases above 1275 rpm.

Optional Auxiliary Power Panel
The power panel provides 8 kW of power for auxiliary lighting and job site work tools. The panel includes four 120 V and two 240 V receptacles.

Serviceability Features That You’ve Come to Expect
Simplified service means more time spent paving and less time spent on maintenance.


Advisor Monitoring System (AMS)
The Advisor display lists diagnostic fault codes for machine functions making troubleshooting quick and easy.

Product Link System
This system provides automatic machine location and hour updates that can be used to schedule service intervals, ensuring that maximum uptime and minimal repair costs are achieved.

Manual Overrides
The hydraulic pump solenoids incorporate manual overrides to assist troubleshooting procedures.

Large Access Doors and Panels
Preventative maintenance points can be accessed through the large swing open access doors and panels.

Remote Lubrication Points
Lubrication points are grouped in order to make routine service quick and easy.

Color-Coded and Numbered Electrical Wiring
Troubleshooting is efficient and simplified with the color-coded and numbered wiring.

Screeds That Deliver Quality
Caterpillar® asphalt screeds with front-mount or rear-mount extenders provide even material flow and unparalleled stability that result in smooth, high quality mats.


AS2252C Vers-A-Mat™ Screed
The AS2252C vibratory screed features narrow front-mounted extenders. The extenders utilize 229 mm (9") wide screed plates making it a perfect fit for commercial applications by reducing the need for handwork when changing paving widths. The main screed plate is 457 mm (18") wide (measured front to back).

AS3251C Extend-A-Mat™ Screed
The AS3251C vibratory screed features hydraulically-driven, rear-mounted extenders. Heavy-duty support tubes stabilize the extenders providing even material flow for high quality results on highways and streets as well as commercial applications. The main and extender screed plates are 457 mm (18") wide (measured front to back).

Caterpillar Customer Support is Unmatched in the Industry
Caterpillar offers “Solutions and Services” and around-the-clock support that meets your everyday needs.


Project Consulting
Project consulting provides a service for improving smoothness, density, and productivity.

Technical Training
Technical training offers in-depth hands-on training to mechanics at Caterpillar training centers or customer locations.

Application Training
Paving Operations Training (POT) is a hands-on methodical approach to the process of paving. The process of “Paving by the Numbers” guides the crew when setting up to pull off the joint.

Machine Support
Parts for asphalt pavers and screeds are available at the Caterpillar Dealer parts counter. Cat Dealers also utilize a world-wide computer network to find in-stock parts to minimize machine downtime.

EQUIPMENT
Optional Equipment

Tractor Options
  • Auger and Mainframe Extensions
  • Auxiliary Power Panel
  • Decelerator Pedals
  • Friction Steering
  • Generator (Belt or Hydraulic Driven)
  • Oscillating Push Rollers
  • Power Folding Hopper Apron
  • Proportional Paddle Sensor
  • Sonic Feeder Sensor
  • Steering Guide
  • Track Plow
  • Truck Hitch
  • Umbrella
  • Uptime Kit
  • Ventilation System
  • Warning Beacon
  • Washdown System (Including Ecological Version)
Controls and Grade References
  • Automatic Grade and Slope Control
  • Non-Contacting Sonic Grade Sensor
  • Contacting Grade Sensor
  • Outboard Leveler, 9.15 m (30') and 12.2 m (40')
  • Inboard Leveler
  • Mobile Stringline
  • Fore ‘N Aft Leveler
  • Sonic Averaging Beam
  • Rigid Ski, 9.15 m (30') and 12.2 m (40')

CONNECT. DISCUSS. SOLVE.
CATERPILLAR EQUIPMENT MAINTENANCE ONLINE COMMUNITY

LATEST POSTS FROM THE ONLINE COMMUNITY ...

Cat C7 Serpentine Belt Diagram
Have a freightliner with a Caterpillar C7 engine. Cannot find the belt diagram on the truck&nbs...  [More]

242D Engine Mounts
I need to replaced the engine mount bushings on my 242D but the bolts hit the fuel tank.I there a se...  [More]

Engine Shutdown Due To High Crankcase Pressure
How can i verify that theres actually a high pressure in crankcase? Before shutdown, MPD also diplay...  [More]

963 Ac Vaccum On Low Side
Long story short blew the low side hose going into the compressor two weeks ago replaced hose and en...  [More]
HOW CAN WE HELP?
SHARE YOUR FEEDBACK OR ASK A QUESTION
Feel free to ask a question or share a comment about the information on this page.

To help us answer your question or respond to your comment, please enter your email address.