Cat 826H

Caterpillar put the first 826 landfill compactor to work in 1978. Since then, customers like you have helped us improve the safety, reliability and productivity of this very popular machine. Our H Series model has enhanced visibility and comfort from a new ergonomic cab. Operators have greater line of sight to areas around the machine, and with CAES installed, the 826H has the ability to be more efficient, lowering your operating costs.

 


SPECIFICATIONSBENEFITS AND FEATURESSTANDARD / OPTIONAL EQUIPMENTMEDIA GALLERY

Specifications for the Cat 826H


Axles
FrontPlanetary – Fixed
Oscillating Rear±5°
Brakes
StandardsMeet OSHA, SAE J1473 DEC84, ISO 3450:1985 standards
Cab
ROPS/FOPSMeets SAE and ISO standards
Dimensions (Approximate)
Center Line of Rear Axle to Hitch7.46 ft
Width over Wheels12.5 ft
Width over Endbits (Blade)14.77 ft
Turning Radius – Inside10.57 ft
Turning Radius – Outside24.06 ft
Engine
Gross Power401 hp
Net Power354 hp
Engine ModelCat® C15 ACERT™
Flywheel Power354 hp
Torque Rise19 %
Bore5.4 in
Stroke6.7 in
Displacement927.56 in3
Peak Torque – Gross1387 ft-lb
Hydraulic Steering System
Piston Pump Output @ 2,000 rpm and 7000 kPa (1,015 psi)49 gal/min
Relief Valve Setting3499 psi
Steering Angle±42°
Steering Cylinder Bore × Stroke114.3 mm × 576 mm (4.49 in × 22.68 in)
Hydraulic System
Vane Pump Output @ 2,000 rpm and 6900 kPa (1,000 psi)93 gal/min
Relief Valve Setting3506.29 psi
Lift Cylinder Bore x Stroke120.65 mm × 915 mm (4.74 in × 36.02 in)
Semi U-Blade
Capacity18.97 yd3
Height6.43 ft
Moldboard Semi U-Length1.51 ft
Moldboard Straight Length11.92 ft
Semi U-Angle25°
Width Over End Bits14.73 ft
Service Refill Capacities
Fuel Tank177.52 gal
Cooling System21.66 gal
Crankcase8.98 gal
Transmission16.38 gal
Differentials and Final Drives – Front23.78 gal
Differentials and Final Drives – Rear23.78 gal
Hydraulic Tank23.25 gal
Sound Performance
StandardsMeet ANSI/SAE and ISO standards
STEP Tips
Diameter with Tips6.19 ft
Tips per Wheel30
Straight Blade
Capacity17 yd3
Width Over End Bits14.77 ft
Moldboard Length14.14 ft
Height6.23 ft
Transmission
Forward 13.6 mph
Forward 26.03 mph
Reverse 14.1 mph
Reverse 26.59 mph
U-Blade
Capacity21.84 yd3
Height6.81 ft
Moldboard Straight Length6.81 ft
Moldboard U-Length4.09 ft
U-Angle25°
Width Over End Bits14.43 ft
Weights
Operating Weight81498 lb
Wheels – Chevron-Pattern, Chopper Blades
Drum Width3.94 ft
Drum Diameter5.03 ft
Diameter with Blades6.07 ft
Blades per Wheel24



SHARE WITH US
WEBSITE FEEDBACK FORM
Did you find what you were looking for on this page?
Feel free to share your comments about the information on this page.


If you would like us to respond to your comments, please enter your email address.




 CALL NOW TO LEARN MORE

Steve Smith
865-595-1061
Send me a message


East Knoxville Machinery Store
865-546-1414 or 800-362-9690

Chattanooga Machinery Store
423-698-6943

Tri-Cities Machinery Store
423-323-0400

Crossville Machinery Store
931-456-6543

 EMAIL THIS PAGE TO A FRIEND
 
 
COMPARE MACHINE SPECS
Compare the specifications of the Cat 826H with similar models from other manufacturers.
360º EXTERIOR VIEW
Take a virtual tour of the outside of the Cat 826H
360º INTERIOR VIEW
Take a virtual tour inside the Cat 826H
JOIN OUR EMAIL LIST
Sign up to receive Stowers news, expert advice and tips, and specials in your email inbox.
STOWERSRENTS.COM
Stowers Rents' fleet of well-maintained, low-hour equipment is the largest in East Tennessee.
SEARCH USED EQUIPMENT
Our inventory includes big machines as well as equipment from our Cat Rental Store fleet.
CONTACT A SALES REP
Find your Stowers sales rep by entering your ZIP code.